Recent content by Sinusvag

  1. S

    AXIS P55/Q60 Multi-connector cable - pinout?

    Updated the table! CUT-------------------------- OUT----------------- 1 24VAC in no 1, or DC+ 24V 2 24VAC in no 2, or DC+ 24V 3 I/O port #4 4. I/O port #3 5. I/O port #2 6 I/O port #1 7 3.3V power 8 DC- (GND) 9 AUDIO OUT #1 10 AUDIO OUT #2 11 3.3V MIC IN 12 3.3V LINE IN 13 --- 14 GND
  2. S

    AXIS P55/Q60 Multi-connector cable - pinout?

    Supergood Lehrian! Thanks!
  3. S

    AXIS P55/Q60 Multi-connector cable - pinout?

    Nice! Yeah, I think that would be the right strategy. Do keep me posted on your findings!
  4. S

    AXIS P55/Q60 Multi-connector cable - pinout?

    Lehrian, Interesting to hear about an underwater ip camera! ROV? My advice: Just power off the cam and open it - just a few screws to get to the PCB and from there you can probe it. Also, it is simple to add a temporary connection using some wires from a network cable to a mic and power the...
  5. S

    AXIS P55/Q60 Multi-connector cable - pinout?

    OK, looking at the white male connector from the outside of the camera enclosure noting the small cutout in the connector the power pins are (my numbering, not sure if it is Molex standard for this connector). If you have more info, please fill in the blanks...
  6. S

    AXIS P55/Q60 Multi-connector cable - pinout?

    Hi Lehrian, Actually yes and no. I traced the PCB and came to the conclusion that the two pins marked in the first post are for 24V AC (after the fuses, the traces lead to a bridge rectifier circuit). In my case, I had readily available access to 19V DC (an old Dell charger), and figured that...
  7. S

    AXIS P55/Q60 Multi-connector cable - pinout?

    Hi all, So, I am the new happy owner of an old P5534 PTZ camera. This camera will be used to watch birds and provide some basic oversight in a small cabin in the woods in the South of Sweden. To power the camera, I ordered a cheapo POE Switch from Ali, and - as can be expected, the camera...
See more
Top Bottom