smiticans's latest activity
-
Ssmiticans replied to the thread Malware in EmpireTech IPC-Color4K-T webplugin.exe.Correct, the key word here is, "when using Internet Explorer". That plug-in was required for Axis Cameras that were being viewed with...
-
Ssmiticans replied to the thread Malware in EmpireTech IPC-Color4K-T webplugin.exe.That's incorrect. Axis typically provides firmware updates on their cameras for about 10 years after the release of the product. Or...
-
Ssmiticans replied to the thread Malware in EmpireTech IPC-Color4K-T webplugin.exe.I've used a handful of Axis cameras, Axis speakers and Axis Modules. I have never had to use internet explorer with any of those...
-
Ssmiticans replied to the thread Opnsense with Dahua NVR.I don't think there are any specific settings on Opnsense for emails. Did you put the Dahua NVR on a separate subnet or VLAN using...
-
SLeave yourself service loops for all wires you install
-
S@smiticans - Amazing! thank you for your help, that worked perfectly. The installation instructions that came within the WAVE2 was...
-
Ssmiticans replied to the thread Honeywell Vista 20P Shopping List.Where did you purchase the 20p? It should've come with a installation and setup guide. Here is a link to an online version- Honeywell...
-
Ssmiticans reacted to eeeeesh's post in the thread Searching for a router that has a common DHCP and supports VLAN with
Like.
Another pfSense fan. I have been running it on a Protectli 6 port for almost (4) years now and it's the best networking move I have... -
Ssmiticans replied to the thread Searching for a router that has a common DHCP and supports VLAN.I've also been using Pfsense for a few years and like any software, there's going to be something to gripe about. However, I disagree...
-
Ssmiticans replied to the thread Honeywell Vista 20P Shopping List.Did you install the 12v backup battery on the Vista 20p? The system will not function properly without the battery attached. The vista...
-
Ssmiticans replied to the thread Axis P3717 warming up.So this cameras was installed within the past few months? This camera is discontinued and replaced with a new model. What Axis OS...
-
Ssmiticans replied to the thread Axis P3717 warming up.I'm assuming its the Axis P3717-PLE? Is it installed indoors or outside? What caused the message? Did it randomly show up or was it...
-
Ssmiticans replied to the thread Honeywell Vista 20P Shopping List.The B-connectors are going to be used anywhere you need to splice a wire (I forgot to mention you need a good wire stripper in addition...
-
S@smiticans thank you for the continued help about the SMP3, 1361-GT transformer and WBOX 0E-SR100S - B connectors. I'll have to look...
-
SHome runs are best. It's technically possible to connect keypads in other ways (could require larger wire), but you're more likely to...
-
Ssmiticans replied to the thread Honeywell Vista 20P Shopping List.The Honeywell 5853 is wireless, the FG-730 is an old model hardwired glassbreak. I added up your max aux power draw and you're going to...
-
Ssmiticans reacted to Darren Vallaire's post in the thread IPC-Color4K-T180 Intermittent 'No Signal' in BI with Like.
So far, after swapping the Tenda switch with the Netgear I have had zero drops!! Thanks so much for your help in this! I feel pretty...
-
Ssmiticans replied to the thread Is BI acting weird for anyone else? one camera sees a truck other 3 cameras see nothing?.I noticed this problem within the past year or so. This issue seemed to only affect cloned cameras. When a camera that has a clone...
-
Ssmiticans replied to the thread IPC-Color4K-T180 Intermittent 'No Signal' in BI.I would agree with @wittaj. The only switch that looks reputable is the Cisco switch. I've never heard of the Mokerlink switch so I...
-
Ssmiticans replied to the thread IPC-Color4K-T180 Intermittent 'No Signal' in BI.This sounds more like a network issue rather than a compatibility issue with a specific camera. 54 cameras is a lot and when you have...