Recent content by Sparkotic

so I just tried plugging nic2 into vlan3. set nic2 to ip 192.168.36.34 to mach the vlan3 ip range. i left the default gateway to 192.168.42.254. rebooted pc. cams not working. I changed default gateway to 192.168.1.1 (router), reboot pc. cams not working. deleted default gateway and left blank...

I will try it again and reboot the pc after plugging nic2 into vlan3. If that works, I can just ignore my vlan2, using 1 and 3. My concern in my situation is the acces list for vlan3. I tried removing this list but all of the cli commands I found online weren't working for me. Thank you for your...

Hmm, didn't work. I think it is how my vlans are configured (someone walked me through. I'm trying to figure hmmm... well didn't work. I believe it has something to do with how my vlans are configured. I didn't set them up, I am trying to figure out how to change it. vlan3 (192.168.36.x) has...

This makes sense. (I'm a newbie but trying to learn). Thank you. I will try this when I get home

I am going to try the method above when I get home. If it doesn't work, I will try this method. By direct camera access, you mean logging into the individual cameras? Will I be able to view live feed from my phone while away from home?

I am iut of town and get home tomorrow and will try this. Currently vlan2 is only 1 port. I will add a 2nd and try this. Hopefully it works. Thank you

The pro switch is my poe device. It powers the cameras. Nic2 plugged into vlan2 (192.168.42.x) functions properly through proswitch and can see vlan3 (192.168.36.x) cameras. Since r7800 doesn't do vlans, nic 1 plugs into vlan1(192.168.1.x) on the proswitch, which is also main network, plugged...

Yes, mine is connected like your example

Vlans 1,2,3 are created in the switch. Nic 1 is to vlan1(primary network and internet) Nic 2 goes to vlan2. Vlan2 can see vlan 1 and 3 Vlan 3 is cameras. Cannot see anything other than vlan3. If I turn on both nics, it seams to work for a minute or two, then cameras begin turning off (or...

Don't laugh too hard. I'm out of town and downloaded an app to make this real quick. Standard home network, gig speed, as many items I can are wired. The pro switch is L3, and a member on this forum walked me through setting up vlans. Vlan1 standard network. With internet Vlan2 bi machine...

Not sure if i should post here or create a new thread... I have followed this set up, pretty straight forward. Everything seems to be good, but after a few minutes my cameras shut off. Can't see them on the BI machine. If I disable the nic attached to the primary network, the cameras turn back...

Thank you. It is working now.

Yes

I copied the blue Iris folder from C to D drive, and I changed the save drives like you suggested, but haven't messed with the time/delete yet. I can not add a folder for where the cameras record, it gives me an error as seen in the first pic. I still cannot see anything in the "all" clips. when...

Thank you for your reply. I will post screen shots tonight when I get home. Thank you