deleting the plugins and power cycling worked, (I also changed the cameras in blueiris from generic to longse, before doing genric was the only PTZ would work) and disabled pullpointssubscription last night and so far so good
S2L33M_IMX322_PTZ_W_6.1.30.3.FLS this is not for this camera its for LRDC60XA200, i originally posted here for a comparison since amanda said if i buy something else they will send the board for free so wanted to know get some opinion on the s500 or just use a diff brand
I tried bypassing blueiris and both cameras stayed on for almost whole day and night, the next day i unplugged one and later that evening when i plugged it back in i can only see a black screen no matter what i do? do u know the default telnet password . Ialso bought the splitter so we will see...
that page has the power specs i bought it because it was cheap about 35 shipped
https://www.manualslib.com/manual/134013/Powerdsine-Pd-6006.html?page=14#manual
i think its total 200 w Max and 15.4 w per port. I had 4 hikvisions connected and they were fine, since unpluging one this morning the...
I made the change it seems like when there are 2 camera's connected one starts to drop intermittently, they have diff IPs and port but the other 2 hikvision 2132f is are fine. This morning I disconnected one of the longse and now the one that was dropping seems to be holding. If it was my...
LRDC60XA200 only posting here because was trying to determine is i should get the one from this thread 8000 bit rate 20 fps VBR iframe at 3 baseline profile see to work ok for me with that cam
I see what you mean. Will be hard as I ran the cables in the attic and it would be a project to get power there, the cameras are installed under the soffits had to fish cables from outside, I woul be able to test with one inside the house but temps are controlled. Is there anything that can be...
Yes it goes offline at night sometimes, since last week i have 1 that i can log into but just show a black screen, had longse tech do teamviewer last night they could not upgrade it or issue any commands to it when they tried to change the IP address or reset it from the iterface, they telnet...
Not sure how do I test that. It's 80f plus here. I also have tablets with an app called imperihome but I get the stream through blueiris not the cameras native URL
When they drop out sometimes they come back up in a couple minutes sometimes i have to power cycle the cable for the poe switch powerdsine 2024, the poe cable is actual in the roof so its not hanging out, I use blueiris for recording and snapshots,
sorry i am talking about the LRDC60XA200...