Recent content by sunix

Here is the update log: U-Boot 1.3.4-100728 (Nov 11 2014 - 13:58:34) ARM Clock: 480MHz DDR Clock: 336MHz Hit Ctrl+u to stop autoboot: 0 [ INFO][MIN]FORMAT: Formatting Flash [ INFO][MIN]FORMAT: .................................. [ INFO][MIN]FORMAT: Format Flash [OK] [ INFO][MIN]TFTP: TFTP from...

Hi finally receive the part to build my serial cable. Here is what I get when I boot the camera: U-Boot 1.3.4-100728 (Nov 11 2014 - 13:58:34) ARM Clock: 480MHz DDR Clock: 336MHz Hit Ctrl+u to stop autoboot: 0 |BIND err| Unknown command:null nand booting ... load kernel... load ramdisk... init...

0x54 = 05, 0x5E = 15, 0x64 = 06 I updated another camera in the same batch with the same TFTP procedure to see if I was doing something wrong and everything works as expected on the other camera. So there must be something wrong with this one, maybe hardware I don't know. I have ordered...

Hi, I confirm that location 0x10 of mtd6ro is 01. I am pretty sure this camera is updateable as I updated my 3 others that I purchased in the same batch. I don't think I created an address conflict, the camera is now standalone with my laptop. I did not change port. If I remember, I was...

Ok thanks. This is what I was thinking. Note: the DS-7616-I model I have doesn't have any PoE ports, so this option is useless on this model (and should probably not be there). So I would have to use my firewall to accomplish my cam isolation.

Hi, I have a HikVision NVR model DS-7616-I (this is a model without PoE port). All my camera are plugged into a PoE switch. I created a VLAN only accessible by NVR where I plugged all my cameras and made the NVR accessible via my normal LAN. (camera IP 192.168.2.X, NVR IP 192.168.0.100) So...

I have some cameras (DS-2CD2132-I) and an NVR (DS-7616-i), all plugged on my local network on a PoE switch (nothing behind the NVR). 192.168.0.0 mask 255.255.255.0. Locally I can access everything. I am currently trying to setup an OpenVPN connection with my router (Asus-merlin) for remote...

Hi, I have a DS-2CD2132-I camera, serial DS-2CD2132-I20141126CCWRXXXXXXX, that is no longer reporting in SADPTool. I have 4 similar cameras and the 3 others report without problem (so this is not a computer setup problem) I was playing in network settings when the camera stop reporting so I...