Recent content by tkje

just wanted to say thanks alot guys for all the help and info! i made the cables again, and i fixed the DHCP range in the router asigned static adresses and it now works perfectly! In case annynody has the same problem in the future!

Thanks man!! i will get on that bright and early tomorrow ! - - - Updated - - - thanks alot man for the info ! :-)

Thanks! Yes i made the cable myself, and no i didnt follow the 568b protocol, but its the same in both ends, so i dont understand how that should be the problem? but maybe im missing something .

thanks for the answer, and i have answered the question above, but yes same cable. but as said is it possible that the switch and router are using different "pairs" for data transfere ? but i have tested the cable with pair tester and all pairs are ok, but if one pair is "connected within the...

Yes it works in the Netgear router when connected with the same cable only with external power supply. ​i even tested the cable "pair tested" im an electrician so i have the cat 5 tester device, i initially suspected the cable , i thaught maybe the switch used different pairs then the router for...

wow thanks alot for all the answers , will answer one by one...and again im sorry if my explanation is hard to understand, english is far from my mother tongue. Ok i just checked my DHCP range and it was from 192.168.1.2 - 192.168.1.254 can i just change this in the router ? like from 100-254...

first of all thank you very mutch for answering, this is so frustrating i cant even begin to describe it. ok to give you a quick info : i purchased 2 cams and one DVR unit a week ago from. i couldnt get the cameras to show on the DVR it has 4x built in PoE ports so i purchased : ZYXEL...

Ok so i have 2 Dahua one bullet and one Dome 3mp. i have just gotten them, and i have a problem. They are PoE and i have a router and a PoE switch connected. When i connect both cameras only one shows up, but when i connect the last one to the router and external power supply it shows up and...

ok so guys i "hotwired" a 12 volt and connected one camera to the normal switch and the camera showed up and works perfectly. Connected the DVR to the same switch and am viewing the picture on there aswell. Real questions: why arent the camera showing up when connected to internal PoE port...

didnt really help, but thanks for the reply annyways

Btw when i find the cameras im connected directly to the NVR built in PoE with my computer running the Search tools.

so i just recieved a new set of cameras from http://www.gwsecu.com/ i think from what i have read that it is Dahua products, annyhow its 2 x 3mp cameras and one dvr h.264 it says on the front. Camera models : KDT-HW10RC83-DEP and KDT-HD18RC83-DEP IP: 192.168.1.108 I have tryed connecting the...