Recent content by TomB

Hi Marco I received one of these a week ago and replaced a 12mm EXIR DS-2CD2T45-I8 on a farm boundary as you contemplate. Where I got about 60m effective line-cross detection with the EXIR cam, the Thermal cam works up to 150m day and night. I was really impressed. Obviously you only get a heat...

I use the default Hikvision protocol. Do you set up your smart events from the NVR through the Web interface or directly on the cameras UI? I do it from the NVR which I believe is the correct way, as the NVR does the processing of the false alarms. Try setting up everything from the NVR. Good luck

Hi I have the DS-7716NXI with V4.1.17 . The situation you describe, is not troubling me. The NVR is performing well,I only wish that all 16 channels had the Acusense function. What I have experienced is the fact that you need to set up the parameters again, when you switch a channel to...

I have 2 of the AccuSense cameras and just had a good look. You set the time when the strobe/alarm activates directly in the camera web interface. Then you link it to certain events. This can also only by done from logging directly into the camera. In IVMS-4200 this link is not showing and...

Hi I can vouch that the firmware installed without problems on my DS-DF8225IX-AEL. The setup parameters that I saved from 5.6.0 would not load after downgrading and a default reset, so I had to setup the PTZ from scratch. One issue that I hoped would improve, didn't. When exposure is in Auto...

Hi. I am new here, my first post. After updating my 2DF8225IX-AEL to firmware 5.6.0 build 190130, I also found that the exposure performance deteriorated and I was stuck not being able to go back to 5.5.6 . Yesterday I came across this thread and after considering the risks, I decided to...