Valiant's latest activity
-
VI doubt it would be cost effective and certainly introduces quite a few points of failure. How much upload bandwidth do you have to...
-
VThat's what I do. Not because I don't have enough ports on my switch but because some of my cameras can't send alerts if they're...
-
VYeah, but try to avoid browsing the internet on that.
-
VValiant replied to the thread Is it possible to connect a driveway beam alarm to a NVR via I/O's.Sounds like a cool project, I had similar ideas but never committed time to it. Take a look at this, might be useful...
-
VValiant replied to the thread Hack required - how to unscrew screw when allan key doesn't grip.Unlikely but I'm wondering if the wrong torx was supplied?. There are 2 types, the anti-tamper tool has a small dimple in the centre.
-
VValiant replied to the thread Hack required - how to unscrew screw when allan key doesn't grip.Sure you haven't mixed up your tools?. Those things shouldn't slip at all. You may need a use a security torx rather than a standard torx.
-
VI'm not sure implementing 3 network cards with different IP addresses equates to "implementing VLANs" - can you give more detail?
-
VSo are the cameras on default/auto settings? If so don't be fooled by the nice bright static image at night. Motion will be a...
-
VThose really in the know won't be buying Amcrest or running higher FPS (with a few exceptions) :lmao: Mainly because Amcrest are...
-
VYou will find that most here run their cameras at 10-15fps.
-
VValiant reacted to bigredfish's post in the thread Address Reservation for my IP camera's... with
Like.
Assuming you mean the cameras are individually plugged into the NVR's own PoE ports, No. -
VValiant reacted to wittaj's post in the thread Why are people buying 4K Dash Cameras? They still perform poorly in dark with Like.
The same reason they buy cheap 4k security cameras - chase MP baby lol
-
VUpon trying to find the reference I thought linked them together, I now cannot find it. That reference might have been a fluke. My...
-
VNot exactly, internally most of it is going to run at 5V, 3.3V, and/or 1.2V. Some parts like the IR lights and IR filter or motors in a...
-
VFWIW, that would be PtMP or Point to Multi Point such as this...
-
VValiant replied to the thread NDAA Compliant Cameras.I didn't think they were related.
-
VValiant replied to the thread P2P not working on Managed Network with Draytek Firewall.What NVR do you have and where do the cameras connect to ?. Do the cameras go to the POE switch or directly to the NVR?, Either way...
-
VValiant reacted to tigerwillow1's post in the thread P2P not working on Managed Network with Draytek Firewall with Like.
My understanding is that if you can browse the web through the firewall, P2P should get through it ok. And if I'm wrong, it can be a...