Recent content by Zuboloma

I finally figured it out. it turns out that the version of the firmware in the camera needed to be downgraded and it started working as expected! Thanks everyone

I finally figured it out. it turns out that the version of the firmware in the camera needed to be downgraded and it started working as expected! Thanks everyone

Hi Everyone, I started a few days ago with this problem. But I feel like that problem is fixed by fixing the streams coming into the cameras. I am looking at just 1 camera. In BI I am using the stream profile /axis-media/media.amp?&streamprofile=high This is directly effected by the...

I was able to confirm the VLC sees 30 fps.

Also I am understanding that the FPS/ket should be 15/1 30/1 something like that? right?

ok after alot of playing I have learned that Main /axis-media/media.amp?streamprofile=0&camera={CAMNO} Sub /axis-media/media.amp?streamprofile=1&camera={CAMNO} in the camera I need to make a stream profile high and low resolution I can set these settings I know that BI is using the settings...

Ok I'll take a look into that thanks!

Most of the cameras I have are multi sensor cameras. so I thought I needed the {CAMNO}

I will read it now, sorry this is all very new to me. Thanks!

Main switch(hp 5406rzl2) - 25 feeds are directly connected to this switch POE 2nd switch (hp 1930) connected to the main using 10gb fiber - 13 feeds connected - most of the cameras with the problem are on this switch but that switch is sitting at 8% usage and 3% ram. I don't have them...

Thanks everyone! I ended up having to add this line into the sub stream and make a profile to match that resolution in the interface for my axis cameras. /axis-media/media.amp?videocodec=h264&resolution=640x360&camera={CAMNO} now the bottleneck error has stopped, the CPU usage is down. but...

Can anyone tell me how to setup sub streams then?

Thanks for the Replys I never considered that the CPU might be the bottle neck. after looking at the main host, your right 24 cores are in use while the 2nd 24 cores are doing nothing. I'll change the allocation to 24 cores. Though what can I change in the cameras to reduce the CPU load...

Hi this is my 1st time here. I have been using BI for a while now, but I am have trouble with a Frame Bottleneck error on cameras. BI is running on a windows 2022 datacenter Hyper-V instance with these resources allocated to it, Intel Xeon silver 4310 CPU 2.1ghz 2 socket 48 Virtual cores (30%...