Dahua's new Ultra PTZ firmware

Dahua released new firmware for their Ultra PTZ lineup. [PN] V2.640.0000000.2.R.180628
No longer PAL and NTSC, but a combined international [PN] release with 12 languages.
Can be downloaded from their international site.

DH-SD6AE830V-HNI
DH-SD6AL830V-HNI
DH-SD6AL830V-HNI-IR
DH-SD6AE240V-HNI
DH-SD56230V-HNI
DH-SD10A248V-HNI
DH-PTZ19240V-IRB-N(-B)
DH-PTZ12248V-IRB-N
DH-PTZ12248V-LR8-N

I was able to upgrade all my PTZ's with no major issues as of yet

+ The PTZ seems a little more fluid / smooth.
Anti-aliasing effect optimized

- The 3D positioning on SD6AE830V camera is way off. (only on this camera)
The range resets height position. ( needs to put back in) for visible range.
Camera time needs to be reset
I was looking forward to the claimed Advanced noise reduction function, but I don't hear a difference.

Live view works with Chrome and MS Edge if Adobe flash is enabled with a few things missing from flash.
(IVS rules and bottom left icons)



Release Notes:
https://www.dahuasecurity.com/asset/upload/Firmware/20180731/dh_sd-mao-nova_internal_pn_stream3_v2_640_0000000_2_r_180628.pdf

@jmcu what's the model of the PTZ you're using in the picture of your original post?

jmcu said:

Live view works with Chrome and MS Edge if Adobe flash is enabled with a few things missing from flash.
(IVS rules and bottom left icons)

Click to expand...

I guess they didn't get the memo that flash is getting killed off too.

jmcu said:

- The 3D positioning on SD6AE830V camera is way off. (only on this camera)

Click to expand...

What do you mean by that exactly? Is it displaying garbage coordinates, trying to travel out of range, are presets working?

Arjun said:

@jmcu what's the model of the PTZ you're using in the picture of your original post?

Click to expand...

SD10A248V-HNI

tangent said:

I guess they didn't get the memo that flash is getting killed off too.

What do you mean by that exactly? Is it displaying garbage coordinates, trying to travel out of range, are presets working?

Click to expand...

Yea, I don't get the flash but I guess they needed something to say "works with all browsers"

Presets are working fine but when you try to use the button in the center of the PTZ controls, it goes to way off.

jmcu said:

Presets are working fine but when you try to use the button in the center of the PTZ controls, it goes to way off.

Click to expand...

Now that's funny.

@jmcu has most dahua's ultra smart models. lol

Lol, waiting for you to send me a new one to test...

Upgraded a 6AE240, no changes jumped out at me.

Firmware 2.640.0000000.2.R.N5.4014.9A.NR, Build Date: 2018-06-28
There could be an issue with IVS >Alarm Track> Track Time.
It is now showing 5 seconds on all my presets. I had different times set for different presets.
I can change and successfully save them. The issue seems to be when you go go back and check them they are always reset to 5 seconds.

After a bit of experimenting, the Issue seems to browser related.
Using Chrome,Opera & Palemoon the values always change back to 5 seconds. When I checked using IE the values would save & actually display the correct value.
View attachment 34489 View attachment 34490
I will check to see if the tracking time is working as desired.
Has anyone else noticed this?