Blue Iris Dahua NVR

97JeepXJ said:
Mine seems to work with with Brave, IE, and Pale Moon just fine. Tried incognito/private mode? Clear browser data?
Click to expand...

I didn't try private mode, but Explorer was completely clean of cookies, browser, etc.
 
wittaj said:
Do you recall any other feature you needed to check to get the alert images?

I have snapshot enabled and everything I could see enabled LOL.
Click to expand...

I’ve looked around, I don’t think so. I have seen same screen as you on occasion flipping between browsers. Plug-in issue?
 
bigredfish said:
I’ve looked around, I don’t think so. I have seen same screen as you on occasion flipping between browsers. Plug-in issue?
Click to expand...

It was a clean open of IE using the hack to get to it. I installed the necessary plug-ins when prompted.

I will try incognito/private tomorrow and see if maybe that works
 
  • Like
Reactions: observant1 and looney2ns
Flintstone61 said:
Select the "add new camera" selection from the "gear icon" by right clicking the gear. input the IP address and User/Password of the NVR. you'll have to change the Port number 8999 to 80 and the RSTP port to 554, if they are not listed that way already.
Then if you click on "Find/ Inspect"
it should populate its results showing something like I have shown here. then you can select a CAm # like
1 or 2 or 3 etc....for
Do this for each camera changing the Cam# for each new cam.
View attachment 137773
View attachment 137774

View attachment 137775
View attachment 137776
View attachment 137777

View attachment 137778
View attachment 137779
Click to expand...
back from the dead
i tried this
it says it cant open port 80
My NVR is a Dahua NVR5208-8P-4KS2E
When i have it up and running it tells me the ip is 192.160.1.108
BI tells me it cant open port 80
Im to the point of getting an unmanaged switch and running one leg into the nvr and one into the BI machine
 
  • Like
Reactions: Flintstone61
You must log in or register to reply here.
Top Bottom