Dahua WizColor 5x59-PRO and SmartLight 5x59-IL new series

Here a few other comparison videos.

Infrared, fully zoomed out
shutter 0-10, gain 0-60 , iris 100 (59ze), smartIR enabled
only infrared from camera you see





Infrared, fully zoomed in
shutter 0-12, gain 0-60 , iris 100 (59ze), smartIR enabled
only infrared from camera you see





smart illumination, fully zoomed out
shutter 0-16, gain 0-60 , iris 100 (59ze), smartIR enabled
video gets much brighter = automode enabled (second half)




smart illumination, fully zoomed in
shutter 0-16, gain 0-60 , iris 100 (59ze), smartIR enabled
video gets much brighter = automode enabled (second half)

 
Last edited:
  • Like
Reactions: quiet.tea, jmcu and bigredfish
I can do the bear testing

 
  • Like
Reactions: jmcu, bigredfish and alekk
duplo said:
Here a few other comparison videos.

Infrared, fully zoomed out
shutter 0-10, gain 0-60 , lens 100 (59ze), smartIR enabled
only infrared from camera you see





Infrared, fully zoomed in
shutter 0-12, gain 0-60 , lens 100 (59ze), smartIR enabled
only infrared from camera you see





smart illumination, fully zoomed out
shutter 0-16, gain 0-60 , lens 100 (59ze), smartIR enabled
video gets much brighter = automode enabled (second half)




smart illumination, fully zoomed in
shutter 0-16, gain 0-60 , lens 100 (59ze), smartIR enabled
video gets much brighter = automode enabled (second half)

Click to expand...


big question:
why you rescale all videos to 1080p (FullHD)? Or YouTube don't support Dahua 4MP ( 2688 × 1520)?
 
  • Like
Reactions: bigredfish
alekk said:
Thanks for the insights @steve1225 ... as I hoping you would chime in with your knowledgeable input.

Would love to get your expert opinion on this comment of mine:
"But what the heck is going on with the smeared grass in the foreground (ditto the tree branches that have some light on them) of the 59ZE ... that looks like some sort of massive JPEG compression ... whereas the 54ZE is much sharper despite being darker. I defer to others, but that doesn't seem to make much sense ... albeit could be early firmware not handling fine detail like grass well."
Click to expand...

this can be many things:

  • all footage we see (both from @jmcu and @duplo) are one/two times rescaled & recompressed.. for now no one have published original footage at native camera resolution...
  • 59PRO-ZE can be wrongly focused...
  • 59PRO have very open aperture (F1.0 for AS, F1.2 for ZE) which can create sharpness / shallow focus problems.. I asked for footage with Iris open to 100, but normally Iris is open to 50 on this model (so aperture is closed to something like F1.6 or F1.8) - in this settings sharpness should be similar to 54IR-ZE..
  • sharpening algorithms can works different.. 54IR is known from over sharpening at default settings... we don't know how 59PRO behave here...
 
  • Like
Reactions: bigredfish
duplo said:
i dont rescale/encode any video. must be a youtube/google thing
if you download the file to your computer its still the same resolution/codec/etc

View attachment 226863
Click to expand...

ok.. thanks for a lot of footage...

one more thing: if you will record more, please always limit 2D & 3D noise to 30...
at default 50 they don't help and only create a lot of problems (lots of ghosting / blur around your movement)..

Also in encode settings you can always move smooth stream to 40 (or even 30) - this will increase compression bandwidth for small changes every video frame like your movement. this should decrease every 2 seconds (every I-frame) pulsing thing at grass.
 
  • Like
Reactions: looney2ns and bigredfish
steve1225 said:
all footage we see (both from @jmcu and @duplo) are one/two times rescaled & recompressed.. for now no one have published original footage at native camera resolution...
Click to expand...

Not true, youtube MAY compress somehow, but jmcu youtube video has 1440p max res
I upload to google drive, the player seems using 1080p, but you can still download the file to your pc and you have the original file smart player made from the dav download from the camera.

steve1225 said:
59PRO-ZE can be wrongly focused...
Click to expand...

that can be, but i used floodlight at night to make sure the focus is correct, which you dont see on the videos

steve1225 said:
59PRO have very open aperture (F1.0 for AS, F1.2 for ZE) which can create sharpness / shallow focus problems.. I asked for footage with Iris open to 100, but normally Iris is open to 50 on this model (so aperture is closed to something like F1.6 or F1.8) - in this settings sharpness should be similar to 54IR-ZE..
Click to expand...

all videos i showed are made with 100 iris, i included all settings used. settings not named are default.
The sharpness is much worse if you use another firmware. There were many testings before from jcmu with different firmwares. This one seems the best at the moment. There may be some better in future.

steve1225 said:
one more thing: if you will record more, please always limit 2D & 3D noise to 30...
Click to expand...

I tested that already, it will not make any huge difference in sharpness.
I even turned off 3D NR at day, also not making the picture looks like the 54ZE sharpness.

Can post some videos later/tomorrow.
 
Last edited:
  • Like
Reactions: quiet.tea, jmcu and bigredfish
duplo said:
Not true, youtube MAY compress somehow, but jmcu youtube video has 1440p max res
I upload to google drive, the player seems using 1080p, but you can still download the file to your pc and you have the original file smart player made from the dav download from the camera.
Click to expand...

OK, I wrote this reply before read your answer that Youtube didn't show 1440p version of Your videos in default video player..

@jmcu did crazy things with re-stream HDMI video output from NVR (which normally is 4K, but if streamed from channel zero on NVR and not external hardware HDMI encoder, it's rescaled to FullHD by NVR) and then rescaled to 1440p because this is native resolution of his computer..

duplo said:
all videos i showed are made with 100 iris, i included all settings used
The sharpness is much worse if you use another firmware. There were many testings before from jcmu with different firmwares. This one seems the best at the moment. There may be some better in future.

I tested that already, it will not make any huge difference in sharpness.
Can post some videos later/tomorrow.
Click to expand...

OK - so this is firmware thing - wrong default sharpness settings.
So you can try to increase sharpness settings in 59PRO camera to emulate that.
 
  • Like
Reactions: bigredfish
duplo said:
I tested that already, it will not make any huge difference in sharpness.
I even turned off 3D NR at day, also not making the picture looks like the 54ZE sharpness.

Can post some videos later/tomorrow.
Click to expand...

on some of your night footage I saw a lot of softness / blurred areas around your body (in places where you left in last 1-2 seconds)..

this is artifact from 3D NR.. plus some grass softness can be also created by 3D NR...

WizColor is using much much more 3D NR than previous cameras like 54IR on default settings.
3D NR is very effective to remove >90% of the noise (in case of static images can remove even 99%)...

but can create artifacts..
 
  • Like
Reactions: bigredfish and Coldair
duplo said:
We will see

Smooth<->Clear
30 should mean more smooth, so more compression on codec

On Hikvision its the other way around
Click to expand...

no...

moving into Smooth means more data (bandwidth) is allocated to small changes between individual (delta) frames in video stream at a cost of I-frames.

moving into Clear means more data (bandwidth) is allocated to a full redraw of the entire image, which occurs every i-frame (usually every 2 seconds with default settings) at a cost of small changes between all (delta) frames...
 
  • Like
Reactions: looney2ns, tmxv4128, bigredfish and 5 others
alekk said:
LOL ... but did the animal detection not only flag this, but correctly identify it was a Bear?!? ;-)
Click to expand...
yes indeed, it even gave it the name Limping lefty
 
  • Haha
  • Like
Reactions: jmcu, tigerwillow1 and bigredfish
Here the new comparison videos.

Infrared, fully zoomed out
shutter 0-10, gain 0-60 , iris 100 (59ze), stream smooth 30, smartIR enabled
NR 50 (54ze) , NR 30 (59ze)
only infrared from camera you see








Infrared, fully zoomed in
shutter 0-12, gain 0-60 , iris 100 (59ze), stream smooth 30, smartIR enabled
NR 50 (54ze) , NR 30 (59ze)
only infrared from camera you see







smart illumination, fully zoomed out
shutter 0-16, gain 0-60 , iris 100 (59ze), stream smooth 30, smartIR enabled
NR 50 (54ze) , NR 30 (59ze)
video gets much brighter = automode enabled (second half)




smart illumination, fully zoomed in
shutter 0-16, gain 0-60 , iris 100 (59ze), stream smooth 30, smartIR enabled
NR 50 (54ze) , NR 30 (59ze)
video gets much brighter = automode enabled (second half)

 
  • Like
Reactions: quiet.tea, redfive, flynreelow and 1 other person
You must log in or register to reply here.
Top Bottom