Search results

no go on telnet access. i can still see the camera in sadp with the 192.168 address and I can ping it fine, but still no web ui access

I used both. The difference is that the 4 line actual displayed the completed message in the tftp program but the behavior was the same after that... Can ping 192.168.1.64 but can't change any settings and can't get to the web ui

thanks for your reply. the firmware was already set to lang 2, which is CN. I changed it to 1, reloaded it and got the endless loop. changed the language back to 2, camera is staying on, but still can't get to web ui.

Yes, it says 4.0.8. build 150401 does anyone have the correct, working firmware for the DS-2CD2032F-IW model camera? thank you all for the troubleshooting help

shows N/A

I appreciate everyone's help with this. I used a different computer and was able to run the 5.3 to 5.2.5 downgrade tool. I think it finished the downgrade, this was the output from the TFTP program. [2016-08-06 10:55:29] TFTP server[192.0.0.128] initialized [2016-08-06 10:56:14]...

I appreciate your reply... Are there specific threads that you can point me towards?

Thanks for the reply. I have a feeling that in the end, I may not be able to resurrect it. However, I would like to try and troubleshoot it and maybe there is a chance to get it going. There might be some value to other on this forum that might run into the same problem. Any troubleshooting...

First of all, I appreciate everyone's time that decides to help me out on this forum in advance. I've read through some posts, but I can't get any of the procedures to work for me. I have this IP cam and it worked fine out of the box, however, I attempted to upgrade the firmware on the camera...