Search results

  1. N

    Starlight cams with audio

    I have reviewed as many threads as possible and cannot seem to locate my answer, but I wanted to see if anyone knew off hand. Looking to order a couple Dahua-2MP-H265-WDR-turret cams and wanted to know if the audio is passed back to the NVR recorder via the ethernet, or do you have to run a...
  2. N

    Cabling to Faceplate

    Yes, as long as your DVR has the POE switch built in the NVR. Otherwise you would need to come out of the faceplates into the POE switch, then one line from the POE switch to the NVR.
  3. N

    NVR display for offsite location

    Not looking for a full resolution feed, just a viewable picture of the NVR console when they are in the office. Both sides have a 50mb/30mb cable connection. Sorry, that wasn't more clear in my initial post. I know the TV will not take the signal directly, but I wasn't sure if there was an...
  4. N

    NVR display for offsite location

    Question for you guys, I have a customer that is looking for a solution to display an offsite location on a TV display, and I am looking for suggestions. For the main location that his office is at, we have an NVR with 16 cameras. I took the HDMI signal out of the NVR to send the signal to his...
  5. N

    Cabling to Faceplate

    Correct. Some NVRs allow you to connect the NVR to the network, then instead of plugging each camera into a separate POE port, you just go into each channel and assign an IP address for the camera you would like to populate on that channel.
  6. N

    I'm still looking for a good 9U rack enclosure?

    Comes included with 2 large fans...should be good to go!
  7. N

    Installation and test equipment

    I grabbed one of these on Ali.. Awesome as it will power the IP, TVI and analog cameras.. Allows you to brute enter the cameras as well if you don't have the pw.. good for accessing existing cameras from previous installs...
  8. N

    Am I wiring my connectors properly?

    As opposed to a "needed future" cable I assume?
  9. N

    Am I wiring my connectors properly?

    Yes you are in the right order. Hold the RJ45 with the nipple down, open end facing you starting with WO to the left. Good luck!
  10. N

    I'm still looking for a good 9U rack enclosure?

    I recently went this route for a client.. I love the removable side panels (for access, but lock as well for security) https://www.amazon.com/gp/product/B00JZVUBFE/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
  11. N

    New V2 Cameras source

    Looks like there are a lot of posts talking about the new v2 camera, but are there any reliable sources to purchase from now? Most of these threads appear to be 4-9 months old? Thanks! -Tim
  12. N

    Experienced with DVR/NVR systems, looking to learn more about BI and benefits..

    Been trying to learn from the site since joining recently.. to provide a bit of background, I have been installing Bosch/Speco DVRs/NVRs for the past 12 years.. I am looking to learn more about the benefits of BI. Where is the best place to start? What is the greatest benefit of BI over using...
  13. N

    Huisun PTZ use with a Interlogix 10C NVR?

    Anyone have any experience using the Huisun cam with an Interlogix 10C DVR? I have the camera output set to OnVIF, and attempt to connect but it says "video failed." I have tried different ports, and several different PWs to get the two to talk. I am able to get Interlogix cams to boot up on...
  14. N

    Best CAT5E RJ45 Crimp Connectors

    The only thing you have to be careful with is the platinum ends are just a hair larger than a standard RJ45 and can cause problems in some jacks. http://www.monoprice.com/product?c_id=105&cp_id=10513&cs_id=1051305&p_id=7245&seq=1&format=2 - Get yourself a bag or two of these and a nice crimp...
  15. N

    newby saying Hello!

    Have you checked your port forwarding in your firewall? Did you configure a DDNS server?
  16. N

    Good source to buy IP items at

    Can you send me your catalog as well? Thank you! -Tim
View older results
Top Bottom