Search results

  1. looktall

    HUGE RUMOR: Unifi Protect will support ONVIF cameras (like from HIK/Dahua)

    Does the UDM have teleport? That's a zero config vpn setup. If you haven't already, make sure you block inter vlan traffic in your network (because it's not blocked by default, thus kind of defeating the purpose of using the vlans in the first place) and then add a rule to allow traffic from...
  2. looktall

    HUGE RUMOR: Unifi Protect will support ONVIF cameras (like from HIK/Dahua)

    Just make a port group and a traffic rule in your udm to allow your camera vlan out to the internet on port 123.
  3. looktall

    [SOLVED] Hikvision NVR Won't Recognize Camera Using Ubiquiti Nanostations

    Is ubiquiti still doing that bullshit? I thought they'd stopped by now.
  4. looktall

    Cameras trying to connect to old NVR address

    So after doing absolutely nothing about this because I haven't had time, one of the cameras has finally figured out the old NVR address no longer exists and has stopped trying to reach it. The other camera still tries every 5 mins.
  5. looktall

    [SOLVED] Hikvision NVR Won't Recognize Camera Using Ubiquiti Nanostations

    Have you tried running the loco from the NVR without the injector? The Poe in the NVR might actually be able to power it already.
  6. looktall

    [SOLVED] Hikvision NVR Won't Recognize Camera Using Ubiquiti Nanostations

    They should be able to negotiate between then who is doing what with regards to power but not necessarily in a way that does what you want.
  7. looktall

    old SmartPSS (v2.003) cannot connect to Dahua NVR starting today, but SmartPSS lite can.

    I certainly wouldn't be taking legal advice from it.
  8. looktall

    [SOLVED] Hikvision NVR Won't Recognize Camera Using Ubiquiti Nanostations

    Can you not use that same link for the cameras also?
  9. looktall

    old SmartPSS (v2.003) cannot connect to Dahua NVR starting today, but SmartPSS lite can.

    I find reviewing video to be clunky and not as easy to zero in on specific times as in the non lite version. That's my only real issue with it. Beyond that it's fine.
  10. looktall

    old SmartPSS (v2.003) cannot connect to Dahua NVR starting today, but SmartPSS lite can.

    Which would be fine if it actually worked properly.
  11. looktall

    old SmartPSS (v2.003) cannot connect to Dahua NVR starting today, but SmartPSS lite can.

    Can someone show me the law that says dahua must provide you with any software at all, let alone specific software products to access your nvr?
  12. looktall

    First effects of Milton in Havana

    It looks like he waited for someone to walk below and then threw the last lot at them.
  13. looktall

    Suggestions for a PoE switch for home network and surveillance systems?

    If you're planning to VPN in you're gonna need a router that supports vlans otherwise it can get you to the switch but I don't think it's gonna get you into the vlan.
  14. looktall

    old SmartPSS (v2.003) cannot connect to Dahua NVR starting today, but SmartPSS lite can.

    If they are cutting it off they may also phase it out rather than cut everyone off at once?
  15. looktall

    old SmartPSS (v2.003) cannot connect to Dahua NVR starting today, but SmartPSS lite can.

    They seem pretty keen on us not using SmartPSS so if you're using it with a p2p account i would say it's entirely plausible that they have crippled it. SmartPSS Lite is rubbish. In particular when reviewing captures, which is really the entire point of using such software, so to not be able to...
  16. looktall

    First effects of Milton in Havana

    Your neighbour got his bucket emptied just in time.
  17. looktall

    Suggestions for a PoE switch for home network and surveillance systems?

    I have one of these. It's brilliant. VPN access via teleport is zero config and just works. Amazingly cheap for what it can do. If the router doesn't support vlan, how will it manage the different IP addressing?
  18. looktall

    Annke Firmware to Hikvision Firmware: HOW TO

    That's a pretty shit experience in my opinion. I told them that changing the day/night switch to auto removes the option to adjust the gain setting (but still allows to adjust exposure). I also asked them if there was a firmware that allowed setting a range for exposure. They told me there was...
  19. looktall

    Cams and internet connectivity at driveway gate

    good luck with that.
  20. looktall

    Overall Red Hue in color mode

    When you say you reset it, does that mean you have power cycled it?
  21. looktall

    Overall Red Hue in color mode

    Is there any improvement by adjusting the white balance?
  22. looktall

    Cameras trying to connect to old NVR address

    Mainly because apart from the log entries clogging up my logs both cameras are working perfectly fine. Fucking cameras. They're like printers. Been around for literally decades and they still can't get them to work properly.
  23. looktall

    Correct sequence to enable bridge mode on Dahue NVR to enable use with Unifi Protect?

    The answer is vlans. This guide might not be exactly what you need, but it will give you a nudge in the right direction. https://lazyadmin.nl/home-network/unifi-vlan-configuration/
  24. looktall

    Cameras trying to connect to old NVR address

    I was hoping to avoid that.
  25. looktall

    Cameras trying to connect to old NVR address

    I have two nvrs and until earlier today their IP addresses were 192.168.1.6 and 192.168.1.108. They are now 192.168.60.6 and 192.168.60.108. All cameras have also been changed over to the .60 network and they're all showing on both nvrs and working fine. However two of them are still trying to...
  26. looktall

    Correct sequence to enable bridge mode on Dahue NVR to enable use with Unifi Protect?

    I've never used p2p on a camera. Only via the NVR. The cameras can get their time sync from the NVR. And yes. Email notifications direct from the camera wouldn't work.
  27. looktall

    Correct sequence to enable bridge mode on Dahue NVR to enable use with Unifi Protect?

    On my uniarch NVR the cameras plugged into the Poe ports could not reach the internet. I'm certain of it but I no longer use the Poe ports on that NVR at all so I can't confirm it. On my dahua nvr I have only ever used the Poe ports in bridge mode so I couldn't say how they function.
  28. looktall

    Suggestions for a PoE switch for home network and surveillance systems?

    Start there. What router do you have and does it support vlans and multiple IP addresses.
  29. looktall

    Correct sequence to enable bridge mode on Dahue NVR to enable use with Unifi Protect?

    Just be aware that adding your cameras via bridge mode will expose them to the internet unless you have got them blocked by other means.
  30. looktall

    Correct sequence to enable bridge mode on Dahue NVR to enable use with Unifi Protect?

    The method you have suggested is exactly how you need to do it. Change the IP addresses on all of the cameras and then set the nvr switch to bridge mode. I don't have unifi protect but I have the exact same dahua nvr as you and I have it set in bridge mode just like you are wanting to do and my...
Top Bottom