Search results

  1. D

    Motion detection on day/night mode switch

    Good point about the thresholds. This is indeed a cloned camera, the 'original' one has lower threshold values (still need to order a disk for 24/7 recording). Masking is already applied. I think the make time is already at its max, cause when the motion is triggered I'm already at the front...
  2. D

    Motion, Line, intrusion detection, when to use what?

    I used line crossing for about a week, but got lots of false positives whenever the clouds moved away from the sun. The shadow would than 'slowly' move over the line, triggering the event :-(
  3. D

    Motion detection on day/night mode switch

    Hi, I'm using motion detection on my front door with following settings: * quite a large 'object size' * make time: 0.7 s * object recject/detect enabled This works for detecting people really wel, however it also trips when the camera switches from day/night mode. This switch happens...
  4. D

    Hikvision DS-2DE2202I-DE3/W PTZ IR Cam Firmware 5.3.8 - Line Crossing Detection Issue

    Re: Hikvision DS-2DE2202I-DE3/W PTZ IR Cam Firmware 5.3.8 - Line Crossing Detection I I'd have to check. But i do have 'Trigger Channel' there for sure.
  5. D

    How to duplicate a camera

    Still not getting anymore motion triggers on the duplicated camera... Did anybody else see this too ? Will post screenshots of the configuration tonight
  6. D

    Hikvision DS-2DE2202I-DE3/W PTZ IR Cam Firmware 5.3.8 - Line Crossing Detection Issue

    Re: Hikvision DS-2DE2202I-DE3/W PTZ IR Cam Firmware 5.3.8 - Line Crossing Detection I Well, I bought them from a Dutch reseller. They seem to work with a hikvision NVR though ...
  7. D

    Hikvision DS-2DE2202I-DE3/W PTZ IR Cam Firmware 5.3.8 - Line Crossing Detection Issue

    Re: Hikvision DS-2DE2202I-DE3/W PTZ IR Cam Firmware 5.3.8 - Line Crossing Detection I I am curious to know what this would mean ? I ordered from a local shop here, and I got brown and Red/White boxes (of the same camera even ...)
  8. D

    Trigger BI alarm using HikV turret and bullet cams

    For my front door, the line crossing is working way better than the motion detection of BI. That is the sole reason I changed it with one with alarm output. Too bad Hikvision does not have the same mechanism (the url to see if the output is active) for non IS cams (as the connection is not...
  9. D

    Trigger recording using Hikvision Alarm output

    Ok, got it fixed myself ... lol :-) I wanted to run a script to send me the snapshot using pushbullet, however on the "Alert" tab, I had to enable 'DIO' in order for the script to fire.
  10. D

    Trigger recording using Hikvision Alarm output

    Hi, I'm trying to setup BlueIris to record when my HikVision camera senses motion using 'Line Crossing'. I want to try it doing this way versus using BlueIris motion detection because I get a lot of false positives with it (e.g. when the lights go on at night). I followed this guide, and I can...
  11. D

    Why I have cameras

    @ADCS: are you using a PIR sensor ?
  12. D

    Why I have cameras

    I would be interested as well. I get lots of false positives as well. E.g. switching from daylight to night mode is detected as motion ...
  13. D

    Which NVR for 4 hikvision 2-series cams (3MP)

    Lol, that makes sense .... :-) Thanks !
  14. D

    Which NVR for 4 hikvision 2-series cams (3MP)

    The vendor proposed me the DS-7608NI-E2/A Netwerk Video Recorder. But I wonder if this supports the cameras recording at 3MP ...
  15. D

    Which NVR for 4 hikvision 2-series cams (3MP)

    Hi, Could you guys advice on a (hikvision) NVR for 4 hikvision 2 series cams (all 3 MP) which is going to be used by my father (I'm using BlueIris myself ...) I don't need a POE one, already have a POE switch. I'll take one which supports 8 cams (in case my father want to add some cams later)...
  16. D

    How to duplicate a camera

    There seems to be some problems with the dummy camera. - Sometimes when looking at the configuration, the mask of the 'original' and 'dummy' cam are switched. - When clicking on the dummy/original cam, the alert list on the right is not updated ... - Motion isn't recorded anymore on the...
  17. D

    How to connect an ip cam to alarm system

    As I don't have hikvision cams with alarm input, I went with the HomeSeer BlueIris plugin and an Arduino to read the status of my alarm panel. If the relay changes, my profile in BlueIris is automatically updated.
  18. D

    How to duplicate a camera

    Thanks, that did it !
  19. D

    How to duplicate a camera

    Hi, I have a camera aimed at the front door and side of the house. I want to start recording when motion is detected, however I only want to be notified when motion is detected at the front door. I've read somewhere that this can be done by duplicating the camera (which should take little to...
  20. D

    Which camera you recommends to good low light outside ?

    Hi Fendermann, Why avoid the 3 MP hikvisions ? They aren't bad at all...
  21. D

    How to connect an ip cam to alarm system

    Mine doesn't ;-)
  22. D

    Hikvision camera motion detection or Blue Iris detection?

    I'm using BlueIris for motion detection, but I do miss the more advanced motion detection of the HikVision cameras...
  23. D

    How to connect an ip cam to alarm system

    How about if your camera does not have in alarm input ? Can this setting be set remotely using e.g. JSON ?
  24. D

    How do I know if my setup is secure from outside intrusions? Aka hacking into camera?

    Re: How do I know if my setup is secure from outside intrusions? Aka hacking into cam the most secure way would be to not expose any ports and to connect via a VPN, though I dont do this myself
  25. D

    Ip cam viewer slow fps

    "Prefer image quality ...." is already disabled :-( I haven't heard of ivms4500, i will look into it ! ivms4500 looks great, however not all of the cams are HikVisions :-/
  26. D

    Ip cam viewer slow fps

    Hi, Sorry if I've put this in the wrong place, but I had no clue where else to put it (and since I'm using hikvision cams ...). I recently purchased my first cams (2332 and others), and everything is running fluently when I view it on my PC (20 fps, highest resolution, ...). Whenever I open...
  27. D

    Ideal record configuration for video

    Yep, maybe it should be enabled by default. At first I was wondering why my load was so high, then after reading here in the forums I enabled direct-to-disc. That had a HUGE impact. My server is headless, so minimizing the BI app also reduces consumption
  28. D

    best OS for Blueiris

    I'm running BlueIris on Win7 Pro in an ESXI virtual machine. Havent had any issues (3 cameras), but I had to enable direct-to-disc recording, otherwise my CPU usage would be almost 100% all the time. cams are 3 MP, 20 fps
  29. D

    Hikvision Camera Settings

    I like the different settings for day/night, if only they would work with automatic switching :-/. I know there is a script to upload these settings to the cam, but is that script able to detect if nightmode is on ?
  30. D

    Maximum image quality setting help

    Thanks for the video ! Even 5fps still looks pretty good to me. @fenderman: what surveillance software are you using?
Top Bottom