Search results
-
W
Custom Firmware Downgrader 5.3.0 Chinese to 5.2.5 English
Works on DS-2CD33321-I 07/2015 Chinese Camera Original shipped version worked fine until I changed the HTTP / HTTPS ports and crashed it, got V5.30 from my ebay seller and then did the downgrade, all is good and in English. Been at this thing for almost a week, my wife gives a big thank you... -
W
No comms after HTTP/HTTPS port Change - Steps Required
Ok so I am now working with my seller to get his camera to ML (currently Chinese) however there is a lot of time that lapses due to geography. I have been reading through some posts is there a way that anyone know to get this from the current chinese V5.3.0build 150327 to ML (was SF Version... -
W
No comms after HTTP/HTTPS port Change - Steps Required
Thanks, I did end up getting the gateway to work, just re-did the procedure and it now shows up properly -
W
No comms after HTTP/HTTPS port Change - Steps Required
All, Starting the upgrade process, have been supplied a file from the person I got the camera from and I get the following when attempting to upgrade to change the language, please advise on a path forward. -
W
No comms after HTTP/HTTPS port Change - Steps Required
Ok, so I got it changed with 192.168.0.xx however I could not get it done with SADP, I would always get an error saying "Failed to modify settings:ID:001" so I logged in with ONIV and got it changed, not sure why this one worked and the other one did but Oh well. After IP change I reset my... -
W
No comms after HTTP/HTTPS port Change - Steps Required
Ok, so I am in and can get to the camera (although it is chinese) and am very happy. However when it comes to changing the IP I am running into an issue I assume I just change the IP address (192.168.1.xx to 192.168.0.xx), do I need to change anything else ? -
W
No comms after HTTP/HTTPS port Change - Steps Required
I know of 12345, and 123456abc I think I have seen on other posts any others I should be aware of ?, hopefully it will not be needed -
W
No comms after HTTP/HTTPS port Change - Steps Required
I assume after the change it may ask for a password, since I have restored the device what would it be 12345 or other ? -
W
No comms after HTTP/HTTPS port Change - Steps Required
Still progressing through this, will try again tonight based on the above recommendations. I would like to say how great all of you are for taking the time to help, it is much appreciated -
W
No comms after HTTP/HTTPS port Change - Steps Required
Can you please advise how and what I would change ?. I assume the following but I could be wrong... 1) - Go into local area connection properties 2) - Select Internet Protocol Version 4 (TCP/IPv4) 3) - De-select obtain IP automatically 4) - Here is where I need help, what do I enter for ID... -
W
No comms after HTTP/HTTPS port Change - Steps Required
Thanks for the info, I did reload the firmware so I am back to square one, sort of. Just having issues with the IP as per post below. Could I use this program to change the IP as well ? or does the IP need to match my local network first ?. -
W
No comms after HTTP/HTTPS port Change - Steps Required
That is what I assumed however I have done the following... Changed IP address = Did not save, came up with and error (I can advise later tonight what that error is) Changed IP address and IPv4 Gateway = same error It is entirely possible that I am doing something wrong for this step so if... -
W
No comms after HTTP/HTTPS port Change - Steps Required
Latest Update With some playing around I was able to reload the firmware via tftp, the camera is now constantly on however I cannot access it (via web browser or ping) due to the following (at least that is what I thing is the problem). My local network is 192.168.0.XX and after the reload the... -
W
No comms after HTTP/HTTPS port Change - Steps Required
I assume once this software is loaded I enter the IP as the location IP:82 if the port I set it to is 82. I keep getting the following... "there was no endpoint listening at http://IP:82 that could accept the message. This is often caused by an incorrect address or SOAP action, See inner... -
W
No comms after HTTP/HTTPS port Change - Steps Required
Got it from Chinese ebay seller so I doubt it -
W
No comms after HTTP/HTTPS port Change - Steps Required
Ok will give this a try and report back, what steps do I take to accomplish this ? - - - Updated - - - -
W
No comms after HTTP/HTTPS port Change - Steps Required
Any idea on where I can get the correct firmware for this camera ?, from my S/N this is a chinese version -
W
No comms after HTTP/HTTPS port Change - Steps Required
Have not tried another CAT5e cable, everything worked prior to me changing the ports so I assume this looping/dropping in and out is because of that -
W
No comms after HTTP/HTTPS port Change - Steps Required
POE, why ?, i assume the external AC is the other plug next to the POE connection. ? -
W
No comms after HTTP/HTTPS port Change - Steps Required
Any idea on where I can get the correct firmware ? secondly instructions on tftp as there are no directions, at least the version I downloaded from HIKVISION -
W
No comms after HTTP/HTTPS port Change - Steps Required
IVMS-4200 installed however the cam is coming up and then going offline, similar to what I am seeing with the SADP and pinging. Remote configuration times out -
W
No comms after HTTP/HTTPS port Change - Steps Required
Yes, powered off for 10 min and then back up again, same results as mentioned above. Will try adding it on IVMS-4200 as suggested and will report back soon -
W
No comms after HTTP/HTTPS port Change - Steps Required
What is the fix ? -
W
No comms after HTTP/HTTPS port Change - Steps Required
Yes both http://IP:XX and https://IP:XX, also sometimes when I am pinging the IP address changes by 1 (example: xxx.xxx.x.28 to xxx.xxx.x.27) not sure if this helps ? -
W
No comms after HTTP/HTTPS port Change - Steps Required
All, Just got and installed DS-2CD3332-I, everything was going great until I started to mess around with the ports. After changing the ports it said the camera would need to reboot and then I lost all comms. I can ping the camera intermittently and it does showq up on the SADP tool however...