Search results

  1. J

    IPC-HDW2831T-ZS-S2 or IPC-HDW5831R-ZE

    My first two cameras are the 2MP IPC-HDW2231T-ZS-S2 and I like them a lot. I want to try something higher resolution so I was thinking about the 8MP IPC-HDW2831T-ZS-S2 but I haven't seen a review in here yet. The pro version that seems to come the closest is the IPC-HDW5831R-ZE. I am just...
  2. J

    IPC-HDW2231T-ZS-S2 freezes when rotating image

    This is the OEM version of the camera from Andy with V8.10.r.191123 firmware, which I think is the latest. I have been running this camera for a week and had no problems at all. Today I rotated the camera 90 degrees to get a better view and I went into the camera web page setup and set the...
  3. J

    Boxed in porch camera placement

    Thanks guykuo for the 90 degree rotation tip, it makes the view even better.
  4. J

    Boxed in porch camera placement

    Finally got the time to mess with this again. I put the cam on a 2x4 as suggested by TonyR and put it at about 5 to 5.5 feet. I cant go any higher or the light fixture will block the view. I like this view much better but will have to wait until it gets dark to see how the porch light affects it.
  5. J

    Is there a setting for how long "Reset Detector" takes?

    Thanks for the info. I take it that Ken is the BI developer?
  6. J

    Is there a setting for how long "Reset Detector" takes?

    I have searched the help files and threads and can't find an answer to this problem. I have "Reset detector when - Object size exceeds" set to 67%, and this works fine when my motion detector lights come on. But if someone walks through the camera view right after the motion detector lights come...
  7. J

    Boxed in porch camera placement

    I have been searching the forums and just found some info on this cam: IPC-HDBW4231F-E2-M, its the dual dome cam. I was trying to stay away from domes but this may be a better option for my front door. The domes seem a little more secure so I could mount it close to the doorbell and have one cam...
  8. J

    Boxed in porch camera placement

    You are right, it is a little too high but the doors are 8 feet so to go lower I have to move it to the side. I am kind of worried about mounting it low enough on the side so that someone could easily mess with it. Does anyone like Dahua make a really small POE camera that I could mount right by...
  9. J

    Boxed in porch camera placement

    Here is the image of the camera mounted above the door. If someone walks up, a motion light to the right of the walkway will turn on as well. I think the ony way to reduce the glare would be to get a new light that points down but with the motion light it might not matter that much. Here is...
  10. J

    Boxed in porch camera placement

    My porch is not set up very well for a camera. It is boxed in as you can see from the pic. The wire access is from the left wall only. I am currently thinking of mounting the camera (Dahua 2231) in the center above the door so I can get a good view of the entire porch. The only other option is...
  11. J

    Great Site - Finally Started Building My System

    I am a Software/Hardware engineer from Northern California. Here is what I am starting with: OptiPlex 9020 SFF i7-6700 16GB 512GB SSD (from ebay) added a 2TB WD Red that I had laying around (I used to work for WD). Ubiquiti Gateway and Ubiquiti POE switch 2 IPC-T2231T-ZS cameras (just got from...
View older results
Top Bottom