Search results

  1. DsineR

    This guy is persistant!

    Insult to injury best part - after crashing thru the ceiling, bottles from the shelves falling on his face.:lmao::lmao::lmao:
  2. DsineR

    Prime Day Deals Thread

    VIOFO dash cams https://www.amazon.com/stores/page/C7999DEE-ED98-42DC-BB26-C597FD9D3B21?ingress=2&visitId=0c6544f4-1c78-4ab0-aed6-a88fc4459ac0&ref_=aa_maas
  3. DsineR

    Desktop Microphone

    Your OP mentioned a pair of mics, this requires a mixer to combine both mics into the cam feed.
  4. DsineR

    Desktop Microphone

    For a solution using a condensor mics: select good omni boundary mics (ex. Shure MX393/O or similar) requires a mic mixer with phantom power (ex. Shure SCM268) will need balanced audio (from mic mixer) to unbalenced (into cam mic in) audio adaptor (ex. RDL TX-AFC1F)
  5. DsineR

    Review-SD4A425DB-HNY 1/2.8" CMOS 4MP 25x Starlight Auto-tracking MiniPTZ

    For spotter cam calls, best practice to MOVE or to MOVE & TRIGGER the PTZ tracking camera?
  6. DsineR

    Review-SD4A425DB-HNY 1/2.8" CMOS 4MP 25x Starlight Auto-tracking MiniPTZ

    I have the same issue, and guessing this is a function of how the camera locks onto a person or vehicle. My typical senario: Spotter cam senses movement & calls PTZ preset, PTZ moves to preset, 2 or 3 or 4 second delay until PTZ recognizes target, then zooms & tracks. Agree - cam loses...
  7. DsineR

    Dahua Cat 5 wiring.

    https://ipcamtalk.com/threads/ipc-t5442t-ze-poe-pinout-tip-for-broken-connector-rj45.65340/
  8. DsineR

    Interesting new setup ideas required.

    Another good SD card for cams: WD Purple QD101
  9. DsineR

    Are there any IP Cameras with stereo input?

    Most Production and Corporate systems use either 3G SDI or IP (or both) cameras. These cams are much more $$ then the typical Dahau or Hik cams. But the audio is separate in these systems, and not part of the camera signal flow. Mic enabled security cams have only one mic - no way to get...
  10. DsineR

    Hall of shame

    The original scissor lift
  11. DsineR

    PoE wattage?

    Cool new POE++ tester TPS200C from Platium Tools. Can be used inline to measure current draw from a device, and determine max power available from the source. Easy-to-use, pocket-sized tester for all varieties of PoE - up to 56 volts and 280 watts of power. Powered by the PoE circuit, the...
  12. DsineR

    Audio from another cam not working

    Confirmed, original Driveway Cam is not providing mic audio to other cams. Tested this on another cam, same results. Only Clone#1 provides mic audio.
  13. DsineR

    Audio from another cam not working

  14. DsineR

    Audio from another cam not working

    Restarting the cam in BI did not work. BUT, the Driveway cam is cloned a couple times (spotters). and mic audio from Clone#1 works as a source for other cams. Strange it does not work with the Driveway cam or Clone#2. Mic audio is present on the Driveway cam, and both Clones when viewing thru...
  15. DsineR

    Audio from another cam not working

    Yes - works when using the web UI & thru BI. Have tried using the Driveway cam audio on serveral cam's, no luck.
  16. DsineR

    Audio from another cam not working

    I am using an external mic with my Driveway Cam (line in feed), and want to use this same audio feed for my PTZ cam. I have successfully done this with other cams, but only when using the cam's internal mic. No luck when using the Driveway cam's external mic when selected for another cam. Is...
  17. DsineR

    Installing cams below house eaves onto soffit vents

    Decent how to video shows this process. Recommend fish sticks for the cable feed.
  18. DsineR

    Multiple HDMI extenders on one network

    Encoders & decoders are IP devices, and should be 'addressable'. Any UI available with your devices to set IP addys? Then direct traffic as needed for Tx -> Rx devices.
  19. DsineR

    Best VPN to use? Asus appear to have added many more to their routers vi firmware

    Switched from OpenVPN to Wireguard - easier to implement & faster.
  20. DsineR

    Correct sequence for firmware update?

    Advice from @looney2ns It's usually always best before updating a firmware, that you follow this: 1-Set camera back to FULL factory defaults. 2-Update firmware. 3-Set camera once again back to FULL factory defaults. 4- Configure camera back up from scratch, don't import any exported settings.
  21. DsineR

    Correct sequence for firmware update?

    Agree! There are tons of devices that excel from firmware updates for fixes and upgrades, sad this is a shortcoming for Dahua. From personal experience, all my cams are Dahua running current firmware - knock on wood no problems. Do your research, read update notes and determine if the...
  22. DsineR

    What are you all using to control your PTZ?

    Dahua offerings: https://www.dahuasecurity.com/products/All-Products/Display--Control/Control/Keyboards/NKB1000 https://www.dahuasecurity.com/products/All-Products/Display--Control/Control/Keyboards/NKB5000(-F)
  23. DsineR

    IPC-Color4K-T - lost live view on Cam UI

    Winner! Firewall was blocking the ActiveX Module. Live view is now restored - thx Andy!
  24. DsineR

    IPC-Color4K-T - lost live view on Cam UI

    Update - I am able to access live view from another PC, using multiple browsers. So the problem is not browser related, but something on the Cam PC was deleted when the plugin was removed. Reloading the plugin does not return the live view, need to figure out what is missing.
  25. DsineR

    IPC-Color4K-T - lost live view on Cam UI

    Great suggestions, but have tried Pale Moon with history, cache & cookies wiped. Still no image.
  26. DsineR

    IPC-Color4K-T - lost live view on Cam UI

    Yes, Edge in IE mode as well as Chrome with IE Extension. No joy from either.
  27. DsineR

    IPC-Color4K-T - lost live view on Cam UI

    It also worked w/o the plugin for me. Then installed the plugin to check it out, got the 'access internet' warning, uninstalled the plugin, now no image. Will try on another PC or phone, but won't resolve why there used to be an image but now nada.
  28. DsineR

    IPC-Color4K-T - lost live view on Cam UI

    Yes, did reinstall the plugin using: camipaddress/webplugin.exe. The plugin did install, but still no image. Possibly Web5.0 related.
  29. DsineR

    IPC-Color4K-T - lost live view on Cam UI

    No message to download the plugin. Using Firefox as default, but have tried IE and Chrome with the IE extension. Cameras are isolated from the internet. Here's the UI image:
  30. DsineR

    IPC-Color4K-T - lost live view on Cam UI

    Viewing the Cams UI - live view, decided to click on the 'install plugin' prompt. After successful install, immediately received a message from my firewall that the plugin was trying to reach the internet. Did not want that, so uninstalled the plugin from the: program files/webrec/torch/...
Top Bottom