Search results

  1. jmcu

    NVR5208-8P-4KS2E Can you configure a BEEP sound on IVS detections?

    Yes there is.. In 4.0 FW it is under AI -->Parameters --> IVS-- select channel, IVS rule ,trigger cog, buzzer..
  2. jmcu

    How to erase a single cell in motion detection area in Hikvision camera web UI?

    Just click on the cell.. or click and drag for a area.
  3. jmcu

    Upgrade for SD6CE225U-HNI Dahua PTZ ?

    WTS - [US] DH-SD6AL445XA-HNR-IR 45X WizMind PTZ ;)
  4. jmcu

    Good/bad idea to mount a camera to a tree?

    lol - Yea this is higher than most would install, it is used for a critter cam and no plate capture required for them. It is on a side hill so to the left of the ladder goes uphill and right downhill.
  5. jmcu

    Good/bad idea to mount a camera to a tree?

    I had one in this tree for about 5-6 years, just upgraded the cam and had to change out the cable 1x, because another tree fell on it.. 1
  6. jmcu

    Review-IP Villa Outdoor Doorbell Station & Indoor Monitor Kit

    You are able to replay your messages from the call log ?
  7. jmcu

    Review-IP Villa Outdoor Doorbell Station & Indoor Monitor Kit

    Has anyone figured out the message system yet?? If you let the VTO ringer time out when pressing the call button you are able to leave a message at the end by pressing the button to leave a message. ( if it is on in the settings ) It will show up on the VTH as a missed call. I was able to...
  8. jmcu

    Review-IP Villa Outdoor Doorbell Station & Indoor Monitor Kit

    Are you able to answer a call outside of the network? I rang the VTO and the push to phone said it couldn't answer because not on wifi ? If no one answers the VTO ring it says you can leave a message, is this stored on SD card? And where to play back?
  9. jmcu

    Control PTZ through NVR

    Yes you will be able to control the PTZ from the NVR without 485. It has a PTZ box with direction arrows with presets, pan, pattern, etc.
  10. jmcu

    Shipping methods

    He normally ships DHL but he will also use Fed Ex. @EMPIRETECANDY
  11. jmcu

    Review-IP Villa Outdoor Doorbell Station & Indoor Monitor Kit

    Is there any voice over template to change the messages?
  12. jmcu

    Review - Dahua SD49225XA-HNR 2MP 25x Starlight + IR PTZ AI Camera with Deep IVS & SMD Plus

    It's a PTZ, it will not matter. Here is one with a low profile soffit mount
  13. jmcu

    Review - Dahua SD49225XA-HNR 2MP 25x Starlight + IR PTZ AI Camera with Deep IVS & SMD Plus

    @Wildcat_1 Incorrect - For me idle motion does NOT work if it is triggered by another cam. It will work if you just move to a idle position but not if triggered by another cam to a preset. That's with a FW update and full factory reset on the camera and NVR. I have several PTZ's and the...
  14. jmcu

    Review - Dahua SD49225XA-HNR 2MP 25x Starlight + IR PTZ AI Camera with Deep IVS & SMD Plus

    Yes a factory reset of the NVR did the trick. It is a nice little camera with great auto tracking.
  15. jmcu

    Review - Dahua SD49225XA-HNR 2MP 25x Starlight + IR PTZ AI Camera with Deep IVS & SMD Plus

    Cam- System Version 2.800.107J000.0.T, Build Date: 2020-03-10 PTZ Version2.401.0000000.45.RHNZ_190815_33003It NVR - 4.001.0000.3
  16. jmcu

    Review - Dahua SD49225XA-HNR 2MP 25x Starlight + IR PTZ AI Camera with Deep IVS & SMD Plus

    When a IVS rule is set up and SMD enabled the SMD is tagged but the autotracking does not follow any targets triggered by the IVS rule. As soon as motion detection is turned off the AT resumes.
  17. jmcu

    Review - Dahua SD49225XA-HNR 2MP 25x Starlight + IR PTZ AI Camera with Deep IVS & SMD Plus

    The idle motion is getting "stuck" when triggered by a spotter cam and will not return to a preset. If you just move it to a preset or turn the cam and leave it then will work but not when called up. The IVS tagging on the timeline is very inconsistent and will rarely tag when tripped. I think...
  18. jmcu

    Review - Dahua SD49225XA-HNR 2MP 25x Starlight + IR PTZ AI Camera with Deep IVS & SMD Plus

    After playing around with this cam all morning I was able to get the the idle motion to start working again. I have had issues with other PTZ's using this with the call up feature. What I am not able to get is the IVS mark to show up on the timeline ( blue line) when you search with NVR NVR...
  19. jmcu

    Review - Dahua SD49225XA-HNR 2MP 25x Starlight + IR PTZ AI Camera with Deep IVS & SMD Plus

    @aabs I have tested this cam and like most dahua cams it does not return with idle motion. The work around is to use Time Task. It sucks because you have to pick the right amount of time as not to interfere with what the subject is that tripped the IVS
  20. jmcu

    Dahua PFB203W vs PFB204W

    Yes it looks like the 203 for that cam.. Buy on Amazon / ebay -- a bit cheaper https://amcrest.com/amcrest-wall-mount-bracket-for-dome-cameras-amcpfb203w.html
  21. jmcu

    New iDMSS Version 4.90.000

    Thanks for the feedback.. anyone getting push notifications using the 4.0 NVR firmware with the new DMSS app. and iOS ??
  22. jmcu

    New iDMSS Version 4.90.000

    Can anyone confirm that the push notifications are working for DMSS for the i products.. I know they are for droids.. ??
  23. jmcu

    Tree climbing woodchuck

    After seeing @Ssayer video of his groundhog, I looked on my NVR this morning and see one climbing a tree... Up here we call them woodchucks as well.
  24. jmcu

    Darn, I hate Groundhogs!

    Nice garden !! Be careful, they can be pretty dangerous. I got this one on my PTZ a few years back and decided to let him be.
  25. jmcu

    SD59225U-HNI DH_SD-Eos_MultiLang_PN_Stream3_V2.810.0000000.4.R.200509.zip；

    You should set up your smart plan in the camera. If it isn't showing up when you log into the camera try closing all your open browsers and clearing your browser history / cache and try again.
  26. jmcu

    SD59225U-HNI DH_SD-Eos_MultiLang_PN_Stream3_V2.810.0000000.4.R.200509.zip；

    YW, it's a new way they did it with this firmware.. The icon above it is for intelligent tracking... auto tracking without rules set up
  27. jmcu

    SD59225U-HNI DH_SD-Eos_MultiLang_PN_Stream3_V2.810.0000000.4.R.200509.zip；

    Need to go to smart plan and add the preset
  28. jmcu

    Review-AI NVR 4216-I

    I just picked up a A4x10 that I am going to try out with the 5208-4ks2. Why did you choose the thicker - x20?
  29. jmcu

    Which doorbell?

    The NDB313-W has proven the best so far for me. It does NOT have PoE but you are able to use with Dahua NVR with the right firmware and/or use a SD card for playback and it has pretty good wifi range. The 5442 will send alerts to your phone but there will be no 2 way talk. You would need a cam...
  30. jmcu

    Dahua DMSS App.

    Yes.. the new app is now just DMSS, it is a different app but just about the same.
Top Bottom