Search results

  1. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    Because some of the other firmware’s have onvif support, so for example when someone gets picked up by the cameras pir, it can tell BI, then BI will send me a notification with a 10sec gif so I can see who is snooping around or at the door, and BI will do that by the time you have read this.
  2. A

    Are you happy with iOS Blue Iris mobile app?

    I've been using BI for over 10yrs now and for myself it is far superior to anything else i have used and seen, super customisation with detection, scheduling and push notifications to ios, the mobile app is just as good for me, although not the slickest looking, it just works and i find it easy...
  3. A

    Help with profiles and geofence

    Hi i have managed to setup exactly what your trying to do, although it did take a bit of sorting but works well now, i will try to explain what i have to try and help you along, 1, Four profile like you say, home day, away day, etc 2, Schedule tab on main settings, set each "profile to draw"...
  4. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    Does anyone understand this, :confused: will it allow curl to adjust things.
  5. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    57f here, cold and wet and miserable. Enjoy you 2.
  6. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    That looks really nice @alexdelprete , shivering over here in UK.
  7. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    @alexdelprete again that was not me at 02:53, may try looking in pc logs
  8. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    Yeah i know what you mean, was just trying to get quality and quantity but may have to resign to just the 1, will see how it goes. Although BI showed no disconnects over 24hrs on the 5GHz, just the app lost touch.
  9. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    This time BI kept hold but Ezviz app lost camera, another reset, Just pressed reset and reconfigured in batch, so reserved ip may have helped BI but not sure why Ezviz app lost it, got a sig/intensity of 62, and not sure what went off at around 01:54 but i was defo fast asleep. if problems...
  10. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    Been away from home this week and noticed BI lost my Ezviz although the Ez app still had connection, when i got back to my pc i noticed that the cam has changed its ip address and gateway, so i have reserved one for it now and see how that goes.
  11. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    I have the Ezviz and wnet up to the Hikvision firmware and i still have the outside bell option in the Ezviz app, i think @alexdelprete has experienced this.
  12. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    If i use the Hikvision firmware then with the motion sensor page in batch config, does it work independently to the pir sensor or is that the area the pir will cover and alert if need be, is this tied to the pir detection area on the notification settings in app, are they 2 different things or...
  13. A

    Blue Iris Alexa alert integration

    This sounds good, hope it's easy to set up though, not very computer savvy. Need 1, 2, 3 setups lol Cheers
  14. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    Dashcam, which one is that and is it using van batt power. Found it on a prev post. Cheers
  15. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    Yes or if BI could do it via curl, that would be the ideal solution for me, BI geofence works well, i do have smartthings but only for the Sage db and Alexa, i don't know enough about it all myself and would't know were to start, i do curl my cams for day/night settings and that was a stretch...
  16. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    Yes, i had seen that info from 101 and a previous post of yours stating how you had done it, got my smartthings/sage working/talking, i just had a powerkit incident, also i did take me a while to get my stability problems sorted with the Sky router problems, but all good now, just this to sort...
  17. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    Thank you very much for your help, i think i can see how you wired it too. Thanks again, for yours and everyone's help, forums can be priceless for information. Cheers
  18. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    Thank you, can you just get an end shot of the pins, the top left photo, but from the end on. Cheers
  19. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    And end shot of the bit of wire you just had, so i can see the pins. Did you see my pre edit. Cheers
  20. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    is it just the 2 pins, can you get a close end shot. Cheers
  21. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    Yeah found that but could do with knowing what pin goes where. Edit, and whilst your here, i do not have a chime so when i put the power kit in i wire it in series, then i basically put the sage wires to the same connections, sage in parallel to the power kit? Cheers
  22. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    Can someone put a photo up of the pins on the power kit plug, long story but lost myn and i need to solder the wires on to the pcb. Cheers
  23. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    This is myn, the SKY ones, but before i moved the router the SKY 144 was at the top and the SKY 450 was a lot lower because the signal was a lot weaker due to not travelling as far, 5GHz only around 15ft i believe.
  24. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    Not throwing fuel on but, i have reset to a single ssid now and noticed when setting the network in batch config it does show 2 of my ssid but with different kb/s, one at 144 and one at 450, so now chose the 450 one and all good. Which is something people could be made aware of. Cheers Now...
  25. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    Thanks for your help with this, i seem to have sorted it now, and i am sure this was the root of all my dropout problems, i had the doorbell setup on my 2.4GHz which only gave me 124kB/s, which if my calculations are not far of is less than 1Mbps and the camera demands around 2Mbps, hence the...
  26. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    And if I get a wired AP closer with the cam default to using 5GHz, instead of the 2.4 this is currently using on my extender. And how to I know or tell the cam to use 5GHz. Cheers
  27. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    Not sure what this is but after having numerous problems with dropouts visible through BI and going through all 101 troubleshooting, I have I think found I can get stability if I leave the image settings on default, medium quality, 1024 bitrate and 15fps, this is showing as around 130kb/s in BI...
  28. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    Ar yes good idea, unfortunately i'm on the other team, ios. Curl may have done it, if anyone managed to get that working yet.
  29. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    Can the "answer doorbell call" be switch on/off via geofence at all, with either ifttt or smartthings or anything, i would like to have it go silent on phone when home as i have the echo's notify me when i am at home and don't need the phone ringing too.
  30. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    I notice the motion detection area in the Hik firmware is more segmented than others, if I set this area in the Hik app on my phone then use the Ezviz app without messing with the area in there, will it use the Hik setting. Cheers
Top Bottom