Search results

  1. rufunky

    Tips for setting up large amount of cameras off site?

    This question is geared toward those of you that do this for a living. Do you typically setup and configure your NVR and cameras off site so that you can just plug and play on site? If so, what tips do you have when you are dealing with 25 of more camaras. surely Individual configuration can...
  2. rufunky

    Ubiquiti nanostation ac Loco

    Do you mind linking me to the exact kit you got?
  3. rufunky

    Ubiquiti nanostation ac Loco

    So it looks like the passive POE injector will work with the 8023af POE switch? Just want to be sure I got this correct.
  4. rufunky

    Ubiquiti nanostation ac Loco

    Did they come with the passive POE injectors or the 8023af POE injectors Tony linked above?
  5. rufunky

    Ubiquiti nanostation ac Loco

    Thanks so much Tony. So this should plug directly into the 8023af POE switch and then the nanostation?
  6. rufunky

    Ubiquiti nanostation ac Loco

    Oh jeeez! So glad I asked first. Is there any reason at all plugging the passive POE injector into the POE switch would NOT be recommended?
  7. rufunky

    Ubiquiti nanostation ac Loco

    I have never used these before so I'm hoping someone that has could answer some questions. I want to connect 4 cameras on a garage that are connected to a poe switch with no nvr. I would like to send the signal over to the main building where the nvr is so that all cameras are on the same NVR...
  8. rufunky

    Possible to have 21tb of storage on an NVR or.....

    Do you have any idea what models support 2 X 12tb HHD? Looks like they all list "Up to 10 TB capacity for each HDD."
  9. rufunky

    Possible to have 21tb of storage on an NVR or.....

    Is it possible to attach 21TB of storage to an NVR ( Preferably Dahua ) or would I need to build a blue iris PC for this?
  10. rufunky

    How would one go about installing cameras on a home like this??

    Thank you for all the suggestions! I found out this house has a full ( finished) basement to the left of the garage. Here's what i'm thinking: NVR in garage -1 cam over each car bay (3 cams total) -Route cable through garage/ basement to far left, punch through on the corner, run conduit up...
  11. rufunky

    How would one go about installing cameras on a home like this??

    It's a single family with vaulted ceilings :/ .
  12. rufunky

    How would one go about installing cameras on a home like this??

    How would one go about installing cameras on a home like this?? There is no attic space, I can't imagine running conduit for the wires... What other options do they have?
  13. rufunky

    Do I need to cut the cable on these coax cameras ?

    I'm converting them. I've already purchased the adapters :)
  14. rufunky

    Do I need to cut the cable on these coax cameras ?

    You know, it was shoved in a soffit. I will have to see if I can pull it through. Thank you!
  15. rufunky

    Do I need to cut the cable on these coax cameras ?

    I have 8 cameras I was planning on converting from coax to IP. I thought I would be able to just unplug the camera from the coax but it looks like these are hardwired into the camera? I couldn't see a way to get to the end of the cable. Does anyone know if I have to cut the cable on these...
  16. rufunky

    Able to log into camera GUI but saying no signal??

    I am setting this up for someone though. Trying to make it as less complicated as possible. I will test to see exactly how much video space I lose, then decide. PS You were absolutely correct. changed to H264H and videos popped right up! Thanks so much for jumping in and letting me know. Saved...
  17. rufunky

    Able to log into camera GUI but saying no signal??

    THANKS! this has been driving me nuts. I will try changing it back to H264 and see if that works. That would suck because I will prob lose a couple days of recording though...
  18. rufunky

    Able to log into camera GUI but saying no signal??

    Ok so I tried another laptop with a fresh install of windows 10 and still have the same issue... Yet when I have a ethernet cable connected from my desktop to the data port on the POE injector and change my nic IP to match the camera, I am able to log into the camera and get live video/ recorded...
  19. rufunky

    Are the browser plugins downloads built into the firmware?

    Great. Thank you
  20. rufunky

    Are the browser plugins downloads built into the firmware?

    Are the downloads for browser plugins to view the cameras GUI built into the firmware or do you need internet access to download them? I've never tried to install one without being connected to the internet before. Curious because of the install I'm doing wont have internet access.
  21. rufunky

    Able to log into camera GUI but saying no signal??

    It doesn't seem that the camera is recording now with this POE injector even though it is powering the camera enough to be able to log into the GUI...I downloaded the last half hour recorded and it was video from when I had it connected to the POE switch! Is there any reason this POE adapter...
  22. rufunky

    Able to log into camera GUI but saying no signal??

    I was using IE, then I tried chrome with extension with the same result.
  23. rufunky

    Able to log into camera GUI but saying no signal??

    Now I'm wondering If maybe I'll have to by a DC power supply to power the camera so I can use a direct cable from the camera to the laptop nic.. I don't understand why the way I have it now isn't working though.
  24. rufunky

    Able to log into camera GUI but saying no signal??

    This camera: https://us.dahuasecurity.com/product/2-x-2mp-ir-multi-sensor-dome-camera/ Firmware is: 2.622.0000000.32.R
  25. rufunky

    Able to log into camera GUI but saying no signal??

    I have a camera that is being installed in a parking lot with no internet. I setup the camera with onboard flash for the recording. I am using a POE injector for power. When I have a ethernet cable connected from my laptop to the data port on the POE injector and change my nic IP to match the...
  26. rufunky

    Who here uses CBR and why?

    I'm curious, who here uses CBR and why.. I have always just left my NVR on CBR as it was the default. Until recently when I had to setup a camera without NVR just onboard flash media for recording. This led me to do some reading, I found a good majority of people recommend VBR with no...
  27. rufunky

    24v poe adapter for a poe camera that is 12v

    Ok, thank you
  28. rufunky

    24v poe adapter for a poe camera that is 12v

    The only difference being the passive is always on vs 802.3af auto sensing ?
  29. rufunky

    24v poe adapter for a poe camera that is 12v

    So basically I need to find out if this poe injector is passive or 802.3af, correct? I don't see either listed in the spec sheet :/
  30. rufunky

    24v poe adapter for a poe camera that is 12v

    Sorry, should have posted more info. Trying to supply power to this camera https://us.dahuasecurity.com/wp-content/uploads/2018/06/2x2MP_IR_Multisensor_Dome_Camera_Arctic_DH-IPC-HDBW4231F-E2-M_v001_004.pdf With this 24v adapter...
Top Bottom