Search results

  1. C

    Live preview wrong stream?

    Have you tried using the client app iVMS-4200 to connect to the NVR? It would be useful to see if that does the same thing. I found the live view via web interface was very glitchy but that was on a mac.
  2. C

    Will a 32 channel POE NVR show me all 32 cameras at once ?

    Perhaps it does not have that feature?
  3. C

    Will a 32 channel POE NVR show me all 32 cameras at once ?

    I have the DS9632-I8 model. Under Configuration|Live View there is an option to display all 32 channels on 1 screen
  4. C

    Continuous green event line on playback Hikvision 2X42 cameras

    Just wanted to update on this to see if others may have the same problem. The live view issue is a problem with Mac Safari so that's solved. I did reach out to Hik tech support and for the solid green event line they suggested turning off dynamic motion analysis. This works but now no events...
  5. C

    Hikvision and POE

    I use 2.5x loupes and having a proper crimper with built in wire cutter helps a lot. Make sure wires are as straight as possible and lined up before you trim them to insert in plug.
  6. C

    Replacing Hikvison DS-7608NI-E2 with different unit - Suggestions?

    I just upgraded from a Hikvision 7716-SP16 to a 9632. The 7716 worked great with 16 cameras (mostly 4 and some 3 MP). I was going to list it on Ebay- let me know if you are interested.
  7. C

    Hikvision and POE

    The 5e RJ45 connectors should be fine. Couple of additional troubleshooting steps would include connecting the camera to the POE switch using a short known-good cable and connecting a known-good device to the end of the cat 6 run or using a cable tester.
  8. C

    Continuous green event line on playback Hikvision 2X42 cameras

    Just to confirm OK to use European firmware on US camera?
  9. C

    Continuous green event line on playback Hikvision 2X42 cameras

    Additional information: if I do an event search for motion on the affected cameras the results are normal, in other words events are triggered by normal motion and there are not continuous events.
  10. C

    Continuous green event line on playback Hikvision 2X42 cameras

    I just completed an upgrade to Hikvision 9632 NVR. I have 20 Hikvision cameras on a 48 port POE switch. Noticing a peculiar issue with 4 cameras: 3 of them are Hikvision 2342W and one is a 2142FWD. All have firmware 5.4.1. On playback the event line is solid green but playback is perfect...
View older results
Top Bottom