Search results

  1. B

    Dome camera losing signal on warm days

    Happened today for me. I took the cover off. Still after 10 minutes no difference. It was now about 6pm so things were starting to cool down. But used a screw driver to push down all the connections again, and instantly camera came alive. Had my phone on me, doing a ping test.... So thinking...
  2. B

    NVR recommendation please

    Thankyou. How about a recommendation of a 16 channel NVR without POE? Doesn't need any network ports, other than 1 port for upload. Then can always buy more POE switches if i do increase from my 8 current cameras. Thanks again.
  3. B

    NVR recommendation please

    Excellent. Thanks for that. Any recommendations for a 16 channel NVR, with or without POE ports, for me to start my investigation?
  4. B

    NVR recommendation please

    Hi. I currently have 8 hikvision POE cameras, on POE switches. I use blueiris at the moment and plan to continue to use it. I am after a NVR to capture 24x7 footage. Requirements: Record 10-12 cameras, 24x7. Cameras 3/4Mb's Non mandatory requirement. 4 Ports which are POE on this NVR, as...
  5. B

    Dome camera losing signal on warm days

    Next time it happens, i might take the cover off. Probably don't need cover on, where i have myn located. Hasn't happened for 2 weeks for me. But we haven't had any hot days for 2 weeks. Got some hot days coming up next week.
  6. B

    Dome camera losing signal on warm days

    I got same issue. 2132 camera. On hot days, wont respond to pings. I thought it was a cabling issue, but never any problems on colder days. Was offline for many hours. I noticed a couple of times, it come back online for 30 seconds or so, before going offline again (including no response to pings)
  7. B

    BlueIris memory leak?

    Just noticed tonight that it appears my video card driver got updated automatically. I assume using Windows update. I am now on: Intel(R) HD Graphics 530 Driver date: 7/10/2016 Driver version: 21.20.16.4534 I have now re-enabled HD acceleration option of "yes+videopostproc", and don't have...
  8. B

    using motion detectors to turn on lights

    An update to my 'scripts'. I find geo-fencing doesn't work to well. So i use my scripts to do a 'ping' to detect if one of two phones are home. If both phones are away, then i change traffic signal to green. For the front door camera, if traffic signal is green, and it detects motion, i play a...
  9. B

    BlueIris memory leak?

    Using these very old intel drivers for video card, if i select HD acceleration option of "yes+videopostproc" then CPU for blueiris is reduced, but the 'system' process takes up 15% of the CPU. I did some analysis of this before, and it is due to interrupts on the video card. It is much better if...
  10. B

    BlueIris memory leak?

    Thanks to SpinnerRow for showing me this thread: https://software.intel.com/en-us/forums/intel-media-sdk/topic/670446 I have rolled back to old video card driver. 15.40.10.64.4300 and memory leak has gone. For my on-board graphics card, which is: "intel HD Graphics 530, i installed this driver...
  11. B

    BlueIris memory leak?

    BTW, where does blueiris get it's CPU percentage from? My CPU is sitting on 60% (blueiris process) without GUI open, 65% with GUI open. But within the BlueIRIS GUI, it says it is using 15% CPU. Ram is accurate though in blueiris GUI.
  12. B

    BlueIris memory leak?

    At least you know it affects me as well, running Windows 10. It is interesting we are using same onboard video card. I will plug a video card in over the weekend, and see if that resolves it. Not sure my new motherboard will accept my very old video cards though. Hopefully I will get some help...
  13. B

    BlueIris memory leak?

    I have the same issue. I just replaced my motherboard, CPU and RAM and now have the memory leak. I didn't have it previously. Running Windows 10 with all updates. Running latest version of Blueiris. i5-6600 CPU, 16GB of ram, Asrock h170 motherboard. 8 cameras (hikvision). All recording direct...
  14. B

    using motion detectors to turn on lights

  15. B

    using motion detectors to turn on lights

    Requires a bit more hardware. But use opensprinkler. This is a computer which is mainly a for sprinkler. Then attach an RF transmitter to opensprinkler. Then it can turn on wireless PowerPoint. I use this now to turn on a big flood light when blue iris has motion detection in back yard. Sent...
  16. B

    Help with configuration of 1 camera and alerts please

    Hi. I have 6 cameras. 5 of the cameras are house facing cameras, which send me necessary alerts when geofencing is enabled. Actually have disabled the in-built geofencing and using my own script. Thats another story, but will share when i have it working for a few weeks (Basically pings 2 phones...
  17. B

    Feature requests?

    Is there a page to request for new features? I couldn't fine one. If not, here are some from me: 1:Ability to encrypt password (such as MD5 hash), when using html commands, such as: /admin?signal=1&user=admin&pw=xxxxx 2:Ability to retrieve traffic light status. I am writing my own scripts to...
View older results
Top Bottom