Search results

  1. Z

    BI Finding Amcrest Cams, but not EmpireTech

    Yes sir I did, and I just reset and did it again. Same results
  2. Z

    BI Finding Amcrest Cams, but not EmpireTech

    I reset the camera, initialized it with password, getting the same results. It simply isn't letting me change the IP. Man fellas, I think I'm about to throw in the towel on this. Getting frustrated. The $50 amcrest cameras took all of 3 seconds to connect, and this $200 one has taken me 2...
  3. Z

    BI Finding Amcrest Cams, but not EmpireTech

    I've never configured the camera, it's brand new, I havent been able to connect to it yet. So it should still be admin/admin yeah? There is a little triangle icon next to it that does say password error though... What else could be the default PW? edit: I also just tried the pw "default" and...
  4. Z

    BI Finding Amcrest Cams, but not EmpireTech

    IPv4 Address. . . . . . . . . . . : 192.168.0.16 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 Thats my IPconfig, and I am putting that into the subnet and gateway into the edit screen
  5. Z

    BI Finding Amcrest Cams, but not EmpireTech

    Yeah thats what I tried, tried setting it to 192.168.0.108 and it says "IP address, gateway or subnet mask is invalid" Then if I double click, and change it, it says IP modification failed. I tried changing the gateway and the IP to 168.0
  6. Z

    BI Finding Amcrest Cams, but not EmpireTech

    Thats what I'm looking at right now, not quite sure how. I do see the camera on the IP config
  7. Z

    BI Finding Amcrest Cams, but not EmpireTech

    Thank you for the detailed info kind sir. I'll try this in a bit. It wont mess with my amcrest cameras using the .0 IP?
  8. Z

    BI Finding Amcrest Cams, but not EmpireTech

    Oh!! alright.. how do I go about changing it to a zero? :wow:
  9. Z

    BI Finding Amcrest Cams, but not EmpireTech

    I just downloaded it and showed both my amcrest cameras and those worked, but dahua still wont load. Still says 192.168.1.108 in ConfigTool
  10. Z

    BI Finding Amcrest Cams, but not EmpireTech

    Sorry that was a typo on my part it is 192.168.1, not 0
  11. Z

    BI Finding Amcrest Cams, but not EmpireTech

    This is correct, thats what my Dahua is showing up as.
  12. Z

    BI Finding Amcrest Cams, but not EmpireTech

    Switch is NETGEAR GS108LP, I also tried powering it solo on the switch and still, no luck. It is factory reset. Browser is microsoft edge, and trying my phones browser as well with no luck (both login to amcrest cameras fine) Amcrest cams are 192.168.0.17 and 192.168.0.21 , the dahua is...
  13. Z

    BI Finding Amcrest Cams, but not EmpireTech

    So i've got my blueiris setup with 3 amcrest cameras, different models. All of them connected flawlessly via web browser and BI. Since everyone praises the Empire cameras I figured I'd give one a shot. I plug it into the switch, tried multiple ethernet cords. It shows up on my camera lookup...
  14. Z

    FTP backup / off-site backup

    Following.. I'm looking for a good webhost that isn't SSD with a couple terabyte I can FTP as well
  15. Z

    Camera not connecting on new router setup

    Hah, you're exactly right.. to be honest, I'm not even sure WHAT change I made that was the one that made the difference because I switched so many things up. Forgive my lack of a better term, but the thing that puts "squares" around people or objects seemed like thats what was causing the...
  16. Z

    Camera not connecting on new router setup

    Ahh, well I fixed that seemingly today with some tweaking - but now it seems my recordings lag. Live stream seems to be fine, but when I recall a recording every 10 seconds it skips/lags for a couple seconds. This is turning out to be a part time job :screwy:
  17. Z

    Camera not connecting on new router setup

    Yeah, I did. On the camera video config setting page it says this: Main (default) Sub (none)
  18. Z

    Camera not connecting on new router setup

    Thanks for the replies fellas, oddly enough, it was a bad switch. I went and bought a new one and everything fired up and found the camera instantly.. Now though, since I got you here, wondering if you could chime in on something else - When I login to the actual cam stream/amcrest server gui...
  19. Z

    Camera not connecting on new router setup

    192.168.0.16 Its actually plugged into the same switch
  20. Z

    Camera not connecting on new router setup

    Hey all so for a quick background, this is my first blue iris system (am however decently familiar with POE and networking) I got a dell optiplex ,new poe switch and an amcrest camera to mess with and get started with at home. Set it all up, everything was working fine. Fast forward to today...
View older results
Top Bottom