Search results

  1. DG99

    A bit confused how to set Blue Iris Vlan on ubiquiti

    Avoid at all cost using a port on the UDM, your cpu will run about 50% solid, The UDM will have to forward and route every packet going to BI, not efficient at all.
  2. DG99

    BI and Synology 220+ Windows 10 VM

    The CPU is Intel Celeron J4025 2GB memory, running synology + windows on 2 Gb ram. You would need the big Synology for an VM.
  3. DG99

    A bit confused how to set Blue Iris Vlan on ubiquiti

    One thing to watch from your diagram is the left and right side of the network connect at the UDM, i would recommend you place a switch in front and connect each side to that. If you run the camera stream through the UDM you will see a major increase of CPU at the UDM, it will tax that unit...
  4. DG99

    A bit confused how to set Blue Iris Vlan on ubiquiti

    Vlan require managed switches or tagging the port of the network adapter on the PC, your setup of vlan is not correct, the unmanaged you are using is just forwarding all packets by mac address and not the tag. Unmanaged switch can not put a vlan tag into a packet header, you can use the...
  5. DG99

    Boavision to BI issue ((HELP))

    Did you put in the correct user name and password in BI, then try the inspect find. Can you login into the camera at the IP address?
  6. DG99

    VLAN configuration Dell optiplex with native Intel NIC on motherboard

    Vlan option for port configuration on a switch are Trunk, General or Access. You would need to configure the port on the switch as Access port and assign your vlan on that port. The port going to your router would need to be a Trunk port.
  7. DG99

    How to get PTZ controls to work?

    In camera properties go to the PTZ/Control tab. Try Dahua New V4 in network IP
  8. DG99

    VLAN- AD110 Doorbell

    For Inter-Vlan routing at switch level you need layer 3 switch. Your netgear is layer 2 switch, you would need your router to do the routing for vlans.
  9. DG99

    Blue Iris Troubles!!!

    Try changing your make to Sunba and
  10. DG99

    BI 5.4.9.15 DeepStack

    Did you change the default port for deepstack? I see you are using 82. Try this goto BI setting-AI and stop deepstack. Open powershell run as admin and paste this command to start deepstack --VISION-DETECTION True --PORT 82
  11. DG99

    How do I switch from one modem mfg to another using BlueIris

    Sounds like you new modem is using a different IP range, was your old network 192.168.1.x? Look at your PC and see what address your new modem is using. You will need to login into the modem and change the IP structure to match your old IP network.
  12. DG99

    Spectrum Port Forwarding

    what port are you using 80?, spectrum home service block port 80 and few others, try 8080
  13. DG99

    Where should i start to troubleshoot this problem?

    If possible take the camera down and plug directly into the switch and see what happens, that would rule out the cable or camera.
  14. DG99

    Is this switch suitable to use with PC w/ Blue Iris

    The switch would need to be connected back to your router and the PC plugged into the switch. The best setup would be a dual network adapters in the PC. One for your network and the other for the camera's to isolate from the internet. Look at the top of the forum and you should reed the WIKI...
  15. DG99

    Is this switch suitable to use with PC w/ Blue Iris

    The TP-Link is unmanaged and Edge switch is managed. The TP-Link will work just fine .
  16. DG99

    Will Windows 11 Make Windows an even more corroborated mess?

    They have also removed internet explorer in win 11
  17. DG99

    Newbie network

    You are better off using a dual nic setup, VLAN will require a router and managed switches that need to be configured. To do VLAN's correctly you would need a layer 3 switch to route vlans and not your router doing the routing, I suggest you read the dual nic setup and VPN's on the WIKI at top...
  18. DG99

    Will Windows 11 Make Windows an even more corroborated mess?

    Anyone that upgrades or installs Windows 11 will need a MS account, the disconnect internet will not work in 11. Once you have login with your MS account, you still can create a local account in windows and delete the MS account, for one who hate to be forced into a MS account. Win 11 also tried...
  19. DG99

    Will Windows 11 Make Windows an even more corroborated mess?

    Installed deepstack on Win11 VM test and is working, CPU version.
  20. DG99

    Will Windows 11 Make Windows an even more corroborated mess?

    Have it running in ESXI 6.5 no problems, also fresh install on 10th gen PC with Blue Iris, added 3 cams and is working fine, have not tried deepstack yet on it.
  21. DG99

    Version 5.4.8.2 PC freezing force reboot.

    Been running 5.8.4.2 for over 2 days and no issues, also running deepstack .
  22. DG99

    5.4.8 - June 16, 2021 - A DeepStack status page has been added

    Update BI to 5.4.8.1 and have checked "save deepstack analysis" check and still boxes are blank
  23. DG99

    5.4.8 - June 16, 2021 - A DeepStack status page has been added

    My boxes are blank, analyses stats are working.
  24. DG99

    Installing a system inside a garage that get HOT ***pics**

    I would look for a vented box, Looks like most poe switches are rated for Operating Temperature: (32℉~110℉) .
  25. DG99

    Cannot access my switch on a second nic

    You need a different subnet for the 2nd nic camera network, just leave the gateway blank
  26. DG99

    Amcrest IP4M-1051B 4MP Pan-Tilt (Dahua hardware)

    I have 2 of the 2MB, use the POE splitter and works good
  27. DG99

    Camera on network, but can't change IP or reserve

    Try setting the camera to a static IP address, if you can only change the last 3 octet's it is because of the subnet mask, what are your lan setting on your router?
  28. DG99

    Wifi IP Camera and live streaming

    Your Wifi would be poor at best in the roof location, how do you plan on powering the camera?
  29. DG99

    Changed ISP to mobile broadband.

    Sound like your lan IP address subnet has changed with the new router, what was your ip of the cameras before, what IP are you getting on your PC.
  30. DG99

    Just setup EdgeRouter X + 2x GS305E netgear switches

    Trunk on the uplink from switch 2 to router. a trunk port is required to forward multiple vlans between switches. each ethernet frame is tagged with vlan membership. The trunk port is configured with 802.1q encapsulation to carry the vlan membership in an Ethernet frame. I thought by using the...
Top Bottom