Search results

  1. I

    hello i'm italian. i can use a sd59430u-hni i have updated with firmware eos...

    hello i'm italian. i can use a sd59430u-hni i have updated with firmware eos dh_sd-eos_eng_p_stream3_v2.600.0000.3.r.20170630. IR lights when they exceed 7x zoom, they turn off with the smartir option while when zoomprio use is always on top. First the lights had automatic compensation based on...
  2. I

    all about SD59230U-HNI

    Search this line with Google DH_SD-Eos_EngSpnFrn_N_Stream3_V2.600.0000000.7.R.170812
  3. I

    all about SD59230U-HNI

    excuse use google translator. I would like to explain automatic update you can also manually disable and control it. there is no new ptz firmware
  4. I

    all about SD59230U-HNI

    new firmware on dahua wiki DH_SD-Eos_EngSpnFrn_N_Stream3_V2.600.0000000.7.R.170812 there is automatic deactivation update
  5. I

    all about SD59230U-HNI

    Thanks for the test I had checked with firmware 9/2016 and scored me s2l processor My doubt comes from the fact that my CAM mounts CMOS 4 megapixel OmniVision does not drain Sony so i think it has been installed on Ambarella chips
  6. I

    all about SD59230U-HNI

    hello for those who have used the new firmware [PAL] DH_SD-Eos_Eng_P_Stream3_V2.600.0000.3.R.20170630 try with request via broswer http: //ip-cam/cgi-bin/magicBox.cgi? action = getSystemInfo to see which processor results I noticed that after updating has changed before it was ambarella s2l it...
  7. I

    all about SD59230U-HNI

    Even myself IR problem does not work properly I hope ing. Dahua Correct
  8. I

    Review-I'll be the guinea pig for the new SD59225U-HNI PTZ.

    Move ptz where you want without any IVS rule and if something moves in front of the target it pursues it
  9. I

    Review-I'll be the guinea pig for the new SD59225U-HNI PTZ.

    In the previous post I can not insert the image. Try the web with http: //tuoipcam/cgi-bin/userManager.cgi?action=getActiveUserInfoAll, and where your ipcam is, you must enter the IP address
  10. I

    Review-I'll be the guinea pig for the new SD59225U-HNI PTZ.

    Auto autotracking follows any moving object whatever the both the ptz position i believe and the panorama tracking
  11. I

    Review-I'll be the guinea pig for the new SD59225U-HNI PTZ.

    Does anyone know why there are two web + web3 accesses same room same customer? Maybe this is the problem of logout I think one is video stream and other webgui commands you think about it?
  12. I

    Review-I'll be the guinea pig for the new SD59225U-HNI PTZ.

    This is used to chase the object even without setting IVS presets I think it is useless if it does not record event
  13. I

    Review-I'll be the guinea pig for the new SD59225U-HNI PTZ.

    I tried and even reinstalled firmware but it does not work. Even the previous firmware had problems with the dahua dealer contact to report problem but I see they have not finished anything I will wait for the next update
  14. I

    Review-I'll be the guinea pig for the new SD59225U-HNI PTZ.

    I also think this is the reason You have to install smart pss to be able to maneuver ptz in the event of an alarm. Did you have any problems with smartir? ?
  15. I

    Review-I'll be the guinea pig for the new SD59225U-HNI PTZ.

    I've tried it on the ptz 59430u and it works fine. Well i have a problem with smartir that turns off the LEDs after zooming 7x and if i zoom zooplus always stay on all the leds even 1x zoom. Then I noticed that the webgui after a while disconnects and I have to re-enter the password. The rest...
  16. I

    Auto Logout issue

    I also have the same problem since I updated the firmware that I have this issue along with so many others. If you try to access http api get on connected users you will see that there are two admins one with web3 and one with other webs I can not tell you what to do
  17. I

    Smart ir turns off over 7x zoom

    After installing new firmware 2.600.0000.3.R.E4.301d.3S.NR, Build Date: 2017-06-30 and PTZ version 3.02.93.RHNT on the ptz 59430u-hni when they are in night mode with smartir Popped up, the 7x zoom goes off the led. On the i setting tab i have switched zooplus but still remain lit even with 1x...
  18. I

    Review-I'll be the guinea pig for the new SD59225U-HNI PTZ.

    I do not want to look controversial but talk a lot about dahua as a good cam sold around the world and I find a problem casino, firmware posted on the official site removed because they create problems and not even an explanation about it. But does not it have a pdf with up-to-date instructions...
  19. I

    Review-I'll be the guinea pig for the new SD59225U-HNI PTZ.

    I closed everything and isolated the cam from everything but it persists. I found on http api cgi some settings that are not on web interfaces so i think it's a frmware problem having upgrate to the previous one and being for several devices has made some confusion over overwrite the previous so...
  20. I

    Review-I'll be the guinea pig for the new SD59225U-HNI PTZ.

    The machine works regularly all day but I can only access webgui after about 19.30. This is what makes me think it feels more like a problem with the light sensor and when it increases the bitrate it does not do it anymore and completely closes the LAN line and is not even visible from ping
  21. I

    Review-I'll be the guinea pig for the new SD59225U-HNI PTZ.

  22. I

    Review-I'll be the guinea pig for the new SD59225U-HNI PTZ.

    I noticed that with bees who the firmware is not written correctly, maybe it depends on this because the problem has arisen since I installed the firmware March 2017 and then I recorded the camera on easy4ip. Then I went back to the firmware 09/2016 and these issues started
  23. I

    Review-I'll be the guinea pig for the new SD59225U-HNI PTZ.

    Sorry for translation are italian use Google Translator
  24. I

    Review-I'll be the guinea pig for the new SD59225U-HNI PTZ.

    But also my sd59430u-hni happened the same problem loses connection from 8-8.30 in the morning then back at 19-19.30 regularly for two weeks I also contacted dahua technician but he does not even know what he can be probable Network attack with some type of malware
  25. I

    Hello I installed the 03-2017 firmware on the ptz sd59430u-hni and it works fine, there is a...

    Hello I installed the 03-2017 firmware on the ptz sd59430u-hni and it works fine, there is a problem with smartir after the 7x zoom goes off. How can you fix it? You who are in touch with dahua can you point to the problem?
View older results
Top Bottom