Search results

  1. A

    Hikvision FIRMWARE TOOLS - change language, extract files and create own firmware

    Does anyone know how to calculate a new checksum if I've modified something?
  2. A

    un brick cameras patched via camera region patch in this forum 5.2.8 to 5.2.5

    That will unbrick the camera, but can I do the language flag hack (networkcamercritic) after this, or will I brick the camera again?
  3. A

    Hikvison Permanent Region Code Hack

    Everything can be found on the first page - however, first of all make sure you can downgrade the camera to 5.2.3 or less (via TFTP) to do the hack. Please note if you downgrade, you may brick the camera (in that case, you can't access the camera to do the hack), and it can be only upgraded back...
  4. A

    Hikvison Permanent Region Code Hack

    If there's 5.2.0 currently on the cam, you can do the hack without any worries, it won't brick. You'll brick only if it is not downgraded, and running with 5.2.5 or 5.2.8
  5. A

    Hikvison Permanent Region Code Hack

    If you were succesful with the downgrading, then the hack clearly works, will not brick the camera. I couldn't downgrade a 2032 but it worth a try. If you can't see on SADP after downgrading, just upgrade back to 5.2.5 with TFTP, it will work again, but don't do the hack.
  6. A

    Hikvison Permanent Region Code Hack

    I've already written a few pages before that you can do the hack, just downgrade to 5.2.3, do the hack, and then you can use any firmware
  7. A

    Hikvison Permanent Region Code Hack

    I've done the hack on 5.2.5 - it's working 100% but first you have to solve the downgrading to older version otherwise you'll brick the cam Try to TFTP downgrade your camera to 5.2.0 - some models don't accept, but some do. If not good, just TFTP upgrade back to 5.2.5
  8. A

    Hikvison Permanent Region Code Hack

    First page: http://www.ipcamtalk.com/hikvision/2593-hikvison-permanent-region-code-hack.html Just make sure you downgrade the cam to 5.2.3 or 5.2.0 via TFTP before doing the hack (otherwise you will brick the cam with the hack). Some models can't be downgraded from 5.2.5 (2032), but others...
  9. A

    Hikvison Permanent Region Code Hack

    As long as you do the mtd5/mtd6 hack it will be english with any firmwares
  10. A

    Hikvison Permanent Region Code Hack

    You can edit the firmware's language flag http://www.ipcamtalk.com/hikvision/2733-hikvision-firmware-tools-change-language-extract-files-create-own-firmware.html However, it did not work for me, because I've tried it on an only english firmware, you have to make sure you have a multilanguage...
  11. A

    Hikvison Permanent Region Code Hack

    And does anyone have 5.2.8 or 5.2.5 multilanguage? i have a cam with it - how can I make a firmware of it?
  12. A

    Hikvison Permanent Region Code Hack

    Sorry it is only english - NOT multilanguage
  13. A

    Hikvison Permanent Region Code Hack

    Thanks very much! 5.2.5 Multlanguage - default english, days everything - Works 100%
  14. A

    Hikvison Permanent Region Code Hack

    Works for me! I've downgraded from 5.2.5 to 5.2.0 then did the steps on the first page. I've upgraded to 5.2.3 via admin console, and it is permanent english (that firmware was always forcing chinese language for my cams)! I hope it will work with 5.2.5 just have to make sure you downgrade first...
  15. A

    Hikvison Permanent Region Code Hack

    Where did you all get 5.2.5 from? Can you link it or show it? Cheers
  16. A

    H.264 DVR CMS software - can't access remotely problem

    I've found a good looking solution - not working, quicktime still freezes http://forums.techguy.org/tech-tips-reviews/1025856-netsurveillance-active-x-control.html
  17. A

    H.264 DVR CMS software - can't access remotely problem

    Yes, it's the same
  18. A

    H.264 DVR CMS software - can't access remotely problem

    Unfortunately not. I've tried with all of their ports (dragon2014.ddns.net:80 ..81 ..10001 ..34599 ..etc - none of them working
  19. A

    H.264 DVR CMS software - can't access remotely problem

    Hi everyone, I have 3 cameras at home connected to router, and software running on pc called CMS. The cameras are cheap chinese ones, I don't expect too much, but I still would like to access it remotely. I've got ddns, port forwarding on router (3 cameras on http 3 ports port 80,81,82, media...
    • AKalm
    • Thread
    • access cms h.264 netsurveillance remote
    • Replies: 4
    • Forum: IP Cameras
View older results
Top Bottom