Search results

  1. M

    ipcamtalk store support ? need help with Blue Iris Key

    Ahhhh, that explains alot, did not know that. I've been trying to get camera support help for a while but never got a DM response back from @Mike since mid June.
  2. M

    New Reolink Wired POE Doorbell Cam ?

    So you had the camera for 6 months and no issues until this formware update? I would say it's definitely worth a call to Reolink for tech support and possible warranty.
  3. M

    Tree sap on sensor

    Honestly if that sap is like pine tree sap then you’ll have to use something like WD-40 to soften and remove it. That will leave an oily residue so you’ll need to use a degreaser like Windex after to make sure then lens is perfectly clean again.
  4. M

    Networking Issue

    Have you used a cable tester to verify you have connection between the terminals on each side? I use something like this...
  5. M

    Looking for a knowledgeable paid consultant for setting up a Blue Iris system

    I booked some time with @Mike through the store, hopefully I can get my setup finally configured. Really looking forward to this.
  6. M

    Unable to connect on WAN

    I had trouble with ZT where I had to keep logging into my online account and reauthorizing the machine. It would work for a while then stop again and I’d have to repeat the process. Eventually I got tired of it and switched over to another VPN.
  7. M

    Blue Iris not retaining IP address after power loss

    No worries, I just misunderstood. I think it was post #17 that threw me off where you mentioned accessing the cameras and the controller was out of the picture. Makes perfect sense how you have it configured because it would be a pain to pull off all that VLAN routing without it. Sounds like...
  8. M

    Blue Iris not retaining IP address after power loss

    I appreciate the response. The BI setting obviously is network related (or we’d all have this problem) but my actual question was why would some folks have issues and others not? What circumstances or situations create this issue? We already know what the fix is but none of those threads...
  9. M

    Blue Iris not retaining IP address after power loss

    Mike is there a reason why not having that box checked caused a problem in this case? I don’t have it checked at all and using Ubiquiti equipment I never had any issues like that. Is this something specific to TP-link equipment? I know Sonnie mentioned that these cameras weren’t on the Omada...
  10. M

    Blue Iris not retaining IP address after power loss

    To me the test would be to take a camera out of the controller and see how it works during a power failure situation. If you get the same issue, then it's not the controller (likely a BI config issue) but if it does work on that camera while others have issues then it's likely the controller...
  11. M

    Blue Iris not retaining IP address after power loss

    That’s what I was thinking too but wasn’t sure if the cameras were also left at the original IP and the controller was having to renegotiate all the IPs at startup. If not then I don’t know how you would shut that situation down (assuming Mike’s suggestion didn’t work nor did setting static IPs...
  12. M

    Blue Iris not retaining IP address after power loss

    Sounds like the BI machine is coming online faster than the controller can negotiate the cameras and is causing issues. So I would unplug one of your cameras, plug it into just a stand alone dumb switch, then plug a PC/laptop into the switch and login to the camera directly. If the camera is...
  13. M

    Blue Iris not retaining IP address after power loss

    Every device should have a static IP (cameras, NICs, switches, router, controller, etc) and those static addresses should all be set on each of the devices not in the controller. This ensures anytime you lose power the device requests the same IP again before it reconnects to your network. The...
  14. M

    Compact indoor wall camera powered from lighting circuit?

    If it’s too hard to run ethernet then I would try to get some way to simplify things. Seems like dealing with the light is a headache so I would just convert to an outlet then use this to get your data over to the BI PC. Then again you can use either wifi or hardwired, whatever you prefer...
  15. M

    Compact indoor wall camera powered from lighting circuit?

    If you’re already running BI, why not just run a POE cable right to that location so you don’t have any limitations on what cameras you can use at all?
  16. M

    Soffit Vent removal for cat6 run

    Fiberglass glow rods work awesome when you're working up in the soffit or attic.
  17. M

    How To Increase Camera Sales

    I don’t even have a PTZ yet but if they get the S3 upgrade I’m in too.
  18. M

    Indoor Camera Recommendation

    Are there any other higher end cameras I should be looking at for indoor use? Is there an equivalent to the 5442 but designed for indoors (ie is there a gold standard indoor cam)?
  19. M

    Indoor Camera Recommendation

    I was looking at the Amcrest PRO HD but I know there’s other good ones out there too. What are other folks using inside with Blue Iris?
  20. M

    New Reolink Wired POE Doorbell Cam ?

    Yes, that was already discussed and Tony provided the answer that it’s absolutely doable.
  21. M

    EmpireTech 9th Anniversary (Summer)Sales

    Got a 5th place prize, big thanks Andy and the rest of the volunteers!!!!
  22. M

    Indoor Camera Recommendation

    Now that I've got my outdoor camera situation well on the way (work in progress anyway), I have one door in the back that's very hard to get a camera on outside. Also this is in our basement entrance where my dog sleeps during the day so I'd like to have an indoor camera that could see what my...
  23. M

    WTS Bosch MIC612 36x Infrared (thermal) Dual Sensor Military-grade PTZ Security Camera

    I was thinking about it but I don't even know if they would let this equipment out of the US since it had DHS all over it. Very nice cameras though!
  24. M

    HDW3849H-AS-PV vs T5442TM-AS for longer distance

    This is why most folks sacrifice a bit on the performance and go with the ZE for a general purpose camera. The Z4E is exceptional in the right circumstances though.
  25. M

    Redbox revokes access to ALL PURCHASED MOVIES & TV: Piracy is COMPLETELY JUSTIFIED! ‍☠️ : Louis Rossmann

    That's what happens when you listen to a guy that's so smart his lips are desperately trying to catch up with his brain.
  26. M

    New Reolink Wired POE Doorbell Cam ?

    Isn't the doorbell being pushed also an ONVIF event in BI which can give you a push notification? Seems like it's covered both ways.....only thing missing in BI vs Reolink app is the 2-way audio (which could get added later). I'm with Tony, very happy with this doorbell in BI, works great.
  27. M

    Restarting cameras causes Blue Iris to pick up factory IP address?

    On each camera you should have a static IP set (I put info below based on your other thread). IP address: 10.11.12.xxx (unique for each camera, make sure you don't have any conflicts with other devices) Subnet mask: 255.255.255.0 Gateway: 10.11.12.xxx (this should be the same as your added...
  28. M

    Emergency Power/Storms/Prepping etc

    Wow, that’s a really deep well. Ours is around 180ft and we have a large pressure tank but no separate holding tank at all. Forget the wiring, drilling that thing must have cost a fortune since they charge by the foot.
  29. M

    Setting up VPN/VLAN and Dual NIC

    Yes exactly, there was no loops in the design I laid out on purpose so that it would all play nicely according to STP. According to the OP there is a very low probability of someone plugging into any of these ports at the pole (although the switch should still be physically secured). It seems...
  30. M

    Looking to hire someone to integrate Blue Iris

    I’ve been in the same boat as you. Not sure if Mike is just too busy right now but was really hoping he could help me set everything up right.
Top Bottom