Search results

  1. I

    IPC-T54IR-ZE-S zoom setting question.

    And after doing a factory default 3 times, and then reinstalling the firmware, I then went in and tried the inspect in BI, and what do you know, it works perfectly. I have never in all the cameras I've worked with ever had an issue with not doing the factory default, but I think from now on...
  2. I

    IPC-T54IR-ZE-S zoom setting question.

    I did go onsite, but did find out, I could have done it at home. I just wasn't thinking. I tend to not think sometimes. :smash:
  3. I

    IPC-T54IR-ZE-S zoom setting question.

    And I just noticed that the camera goes back to its default ip address. I'm doing it remotely, so I will now have to go to the onsite location.
  4. I

    IPC-T54IR-ZE-S zoom setting question.

    I have not done that in the past. I've never had problems before, but I guess there is always a first time. Since I have never done the factory default, will I have to go back in and reset all my settings?
  5. I

    IPC-T54IR-ZE-S zoom setting question.

    No.
  6. I

    IPC-T54IR-ZE-S zoom setting question.

    Nope, the firmware update did nothing to help. No big deal I guess. It works, and that's all that matters.
  7. I

    IPC-T54IR-ZE-S zoom setting question.

    No, it doesn't really work for me. Well, it works for one of the new cameras, but not for the other one. Nothing populates in the one after I go and turn it off in the camera GUI. Weird.
  8. I

    IPC-T54IR-ZE-S zoom setting question.

    Will do.
  9. I

    IPC-T54IR-ZE-S zoom setting question.

    Under image there is nothing like that, and under illuninator there is nothing like that either. Where did you get the firmware for this camera?
  10. I

    IPC-T54IR-ZE-S zoom setting question.

    Device Model IPC-T54IR-ZE-S3 SN 9F0E......3891B Audio Input 1 ONVIF Version 22.06(V3.1.0.1349397) System Version V3.100.0000000.5.R, Build Date: 2023-05-09 Web Version V5.01.0.1431017 Algorithm Version V3.5.6.0 Security Baseline Version V2.3
  11. I

    IPC-T54IR-ZE-S zoom setting question.

    Yep. I did.
  12. I

    IPC-T54IR-ZE-S zoom setting question.

    Yeah, that is exactly what's happened to my brand new S3's from Andy. Not too worried about the zoom part since I set it and forget it, but I don't like the part that the inspect doesn't find it properly. Maybe some of the wiz kids on here will come up with something sometime. They always do...
  13. I

    IPC-T54IR-ZE-S zoom setting question.

    I tried those settings just to test, but they didn't work for me. No big deal I guess, as I will use the zoom from the Camera GUI if I need to, but I guess new cameras sometimes don't work with the old BI settings. It is maybe a safety feature as someone noted??
  14. I

    IPC-T54IR-ZE-S zoom setting question.

    I decided to try it, but turning it off doesn't do a thing on the inspection process in BI. It keeps saying Foscam and then doesn't populate the stream profiles.
  15. I

    IPC-T54IR-ZE-S zoom setting question.

    I found it. Duh. Time to go to bed. I'm too tired tonight to do anymore. Thanks.
  16. I

    IPC-T54IR-ZE-S zoom setting question.

    I thought I knew what you were talking about, but login verification located in network settings? Where do I find Network settings? I'll keep playing around, but I haven 't found it yet.
  17. I

    IPC-T54IR-ZE-S zoom setting question.

    Yes, S3. I'll try that. Thanks.
  18. I

    IPC-T54IR-ZE-S zoom setting question.

    Yeah, I manually entered it. It works, because when I check it on UI3, in properties, it shows substream 2.
  19. I

    IPC-T54IR-ZE-S zoom setting question.

    I do that to, but for these 2 new ones, it doesn't like that. My 5442 just comes up, the new ones sputter and then go blank with only default as a choice but nothing fills in the blank like you have written. Thanks again.
  20. I

    IPC-T54IR-ZE-S zoom setting question.

    Okay, understood. I turned it off, and am using the camera GUI, but I would still like to know what Make and model people use. For one of them, it won't give me a choice for Main and sub profiles. It just says default. If I want to use sub 2, I don't have that option anymore, unless I'm doing...
  21. I

    IPC-T54IR-ZE-S zoom setting question.

    I need to set my IPC-T54IR-ZE-S properly, but it won't zoom in or out for me to test and set it properly. Does anyone know what Video config it should take? Make? Model? And what PTZ setting I should use? I have tried a bunch, but non work. Thanks.
  22. I

    How many watts do you think these cameras will actually use?

    That's what I was thinking. Thanks for the reassurance.
  23. I

    How many watts do you think these cameras will actually use?

    I'm trying to figure out for a PoE switch what these cameras will actually use and what size PoE switch I should get? SD5A425XA-HNR PTZ SD5A425GA-HNR PTZ 2 - IPC-T5442T-EZ 2 - IPC-T54IR-ZE-S3 So, a total of 6 cameras plus a Nano station and EAP. Thanks.
  24. I

    PTZ controls stopped again??

    I tried the New V5 and it doesn't work, so I'll stick with the New V4 for these newer ones. But this setting doesn't work for my 2 year old PTZ. I'll have to play with it I guess. They are Andy's previous model to this newer one.
  25. I

    PTZ controls stopped again??

    I just set it to Dahua New V4 and it works.
  26. I

    PTZ controls stopped again??

    I have the PTZ5A4M from Andy, and my PTZ controls stopped working again on my BI. I know it is user error, but what should the proper setting be to get my PTZ cameras to work with PTZ? Should the PTZ/Control be set as a Dahua camera? It has ONVIF (OXML) set right now, but that is not working...
  27. I

    Is IPC-T5442T-ZE still the best bang for the buck

    Thanks. That sounds great.
  28. I

    Is IPC-T5442T-ZE still the best bang for the buck

    I did a search and found the same question asked, but it ended over a year ago. Since a year has passed, has there been any changes? Is the IPC-T5442T-ZE still the best bang for the buck?
  29. I

    DH-SD59225U-HNI PTZ control works in dahua gui but not in BI?

    My DH-SD59225U-HNI can't be controlled when I try to run the PTZ controls with BI. When I go into the camera GUI the PTZ controls work fine. What happened? Has anyone experienced that before? I'm sure I must have done something along the line, but really haven't messed with anything that I know of.
  30. I

    What do most of you do for runs over 350 feet?

    Well, I just went and talked to him and I think I have it figured out on what we can do. I'm going to be moving the switch and power to the other side of the totally enclosed building. That will put it 70' closer to the farthest away PTZ camera. I told him that was the only way we could get it...
Top Bottom