Search results

  1. P

    HDW4231EM Needs Adjustment or Is It Broken?

    Good to know. Thanks
  2. P

    HDW4231EM Needs Adjustment or Is It Broken?

    The setup I have is temporary just to see if it worked (as you can see from the location of the camera on a piece of firewood & M2 zip tied to the yard hydrant.. It is a clear line of sight. Will be installing them under the soffit to increase the security.
  3. P

    HDW4231EM Needs Adjustment or Is It Broken?

    Soladaddy: Good Eye. Yes it's a NanoStation Loco M2. Just installed it this summer to span 500 foot to my shop. Great addition. Almost 100% of signal strength made it across.
  4. P

    HDW4231EM Needs Adjustment or Is It Broken?

    Ok...first...my apologies to bp2008. You were correct and my conclusion was wrong. fenderman is correct also in his assessmennt off bp2008's analysis. I went outside with a long straight pole in hand and walked slowly back and forth in front of another camera that I thought had no distortion...
  5. P

    HDW4231EM Needs Adjustment or Is It Broken?

    I'll swap cameras and reset tomorrow, it's dark now. Here's the snapshot from the camera web interface:
  6. P

    HDW4231EM Needs Adjustment or Is It Broken?

    ----------Not the first incorrect conclusion I've heard. And I'm sure it won't be the last. Thanks for your input.
  7. P

    HDW4231EM Needs Adjustment or Is It Broken?

    That's a screen capture using a snipping tool with the bottom cropped of address and name. Nothing from before the distortion started. I delete everything older than 24 hr if no activity of importance. Here's a BI snapshot:
  8. P

    HDW4231EM Needs Adjustment or Is It Broken?

    I have 2 other 4231 cameras just like this one plus a 5231 without this distortion.
  9. P

    HDW4231EM Needs Adjustment or Is It Broken?

    so, that leads to the problem being the camera and not BI..?
  10. P

    HDW4231EM Needs Adjustment or Is It Broken?

    Same:
  11. P

    HDW4231EM Needs Adjustment or Is It Broken?

    The previous day everything was great. Building and post were straight. No changes were made to the camera or to the Blue Iris settings.
  12. P

    HDW4231EM Needs Adjustment or Is It Broken?

    I have a EmpireTech IP Camera IPC-HDW4231EM-ASE Starlight 2MP. The picture has been fine since 6/27/18. But yesterday tit changed. Here is what I see. I use Blue Iris too. That is a steel pipe post on the left and the building on the right also has developed a curve. Is this something I can fix...
  13. P

    Dahua Starlight Varifocal Turret (IPC-HDW5231R-Z)

    Ordered a HDW4231EM-ASE from Andy on AliExpress just now. Thanks for the info.
  14. P

    Dahua Starlight Varifocal Turret (IPC-HDW5231R-Z)

    Ok, misread the statement. Read it as "IPC-HDW5231R-ZE, and IPC-HDW5231R-Z stopped production from May, when my current stock use up, then totally ends." Glad to see that. Thanks
  15. P

    Dahua Starlight Varifocal Turret (IPC-HDW5231R-Z)

    Sorry to hear that. Got my first, and last?, IPC-HDW5231R-Z last week and was just planning to buy another. What model do you offer and recommend as a good comparable turret camera? No PTZ needed, The HDW5231R-Z capabilities work for me. Thanks Paul
  16. P

    IPC-HDW5231R-Z Incorrect Date

    Different than I thought. On the Dahua Config Tool System/General/Date&Time tab Check the NTP Within the NTP section: Enter the Public IP address of the PC running BI in the "server" (xx.xxx.xxx.xxx) Enter 123 in the "port" (previously opened UDP 123 in the windows...
  17. P

    IPC-HDW5231R-Z Incorrect Date

    Ok, followed you up to that. I pointed the camera to pool.ntp.org and I opened UDP 123 in firewall. Thanks again for the guidance
  18. P

    IPC-HDW5231R-Z Incorrect Date

    Thanks, Installed NetTime Found Camera settings in Config Tool/System/General/Date&Time. Thanks for the help.
  19. P

    IPC-HDW5231R-Z Incorrect Date

    How do I change the date on my 5231R-Z? I initialized it yesterday. and the date shown on the Live Preview and Blue Iris is 2000-01-02, the time is 11:10:28 (My current date in Ohio is 2018-5-30 and time is 10:25 PM. How can I change the camera date and time. Tried the Dahua Config Tool and Blue...
    • prowland
    • Thread
    • 5231r-z date time
    • Replies: 7
    • Forum: Dahua
Top Bottom