Search results

  1. matchewready

    Having trouble with substream.

    I deleted the camera in BI this morning and started over, thats is where I'm at now. Deleted camera and set on default substream profiles cpu usage is good but recording look like crap reversed them and get good recordings but cpu spikes. I've read through the wiki/substream guide and tried...
  2. matchewready

    Having trouble with substream.

    I swapped them and it does improve the recording but it spikes my cpu usage from 11% up to 29%, thats what happened when I did it with the old profile, with just 3 cams(2x8mp and 1x5mp) (computer is Ryzen 2700+ 16GB, 500ssd, 4TB WD Purple for BI recordings) Screenshot shows the stream profile.
  3. matchewready

    Having trouble with substream.

    I tried that earlier with the old stream profiles and it didnt work properly, I'll try with these new ones.
  4. matchewready

    Having trouble with substream.

    In my post above I used the find/inspect but then changed the Make to Amcrest giving the weird stream profile that fenderman spotted. So I went ahead and reinstalled the camera and reset it to factory defaults. I used the default mainstream and substream drop menus and attached a screenshot...
  5. matchewready

    Having trouble with substream.

    Appears to be a problem with the substream recording, when I turn off substream it looks great and cpu usage goes up a bit. When I use the drop down menu in Stream profiles and pick substream 1 recordings look like crap and cpu usage goes down. Mainstream...
  6. matchewready

    Having trouble with substream.

    After checking some files it doesn't look like it has anything to do with nighttime. The daytime pic above is a livestream, I just check a daytime recording and it looks like crap as well. I think I'll do a reset on the camera in case I borked the settings, when I was in there earlier today
  7. matchewready

    Having trouble with substream.

    I just got these cameras set up and the livestream looks great at night but the recording is crap and much lower res. The daytime livestream and recording look the same(great). I've attached three snapshots. Not sure what I might have done to affect this? Camera is a IP5M-T1179EW-28MM Edit...
  8. matchewready

    Log in to UI3 on demo version

    Thanks, I read that whole thing last night but was probably half asleep by the time I got to that part.
  9. matchewready

    Log in to UI3 on demo version

    Trying out the BI demo and I'm trying to use the UI3 it's asking for username and password. I don't see anywhere that I can even create a user/pass, is UI3 available on the demo?
  10. matchewready

    Error 8000007a(Check port/user/password)0 Help please

    Ok I got it! When I reset the camera I powered off and just pressed the button for a couple seconds. Found a link on the proper way to reset, hold for 45 seconds while being powered on. That was the whole problem, so simple:banghead: You guys never gave up and for that I'm grateful!
  11. matchewready

    Error 8000007a(Check port/user/password)0 Help please

    I'll try that, I appreciate all the help guys. Is the hard reset suppose to wipe the password? I reset it 3 different times
  12. matchewready

    Error 8000007a(Check port/user/password)0 Help please

    When I first logged into the Amcrest view app it made me change the password but pretty sure I didnt change the username. I tried admin/ and the new password but no luck, now I have 2 chances left:idk: Also when I changed to 10.0.0.250 the link does not load the amcrest log in page, when I use...
  13. matchewready

    Error 8000007a(Check port/user/password)0 Help please

    Cam webGUI will come up, log into cam with user/pass. I don't know the user/pass, I tried admin/admin no luck,
  14. matchewready

    Error 8000007a(Check port/user/password)0 Help please

    Yes, my modem/router is supplied by my isp ip addy of router i 10.0.0.1 ip of BI PC is 10.0.0.130 my laptop is 10.0.0.229 I changed the camera to 10.0.0.250 but do'nt see an option in BI to log into camera and disable / turn off uPNP and P2P ?
  15. matchewready

    Error 8000007a(Check port/user/password)0 Help please

    Ok, I did a hard reset on the camera. 2.Assign a static IP to the cam in the same subnet as the BI server but outside of your router's DHCP pool. Looking around inside my router for this option but am completely lost on this one?
  16. matchewready

    Error 8000007a(Check port/user/password)0 Help please

    New to BI and just set up one camera last night. Connected to it in BI and all seemed fine. Wife asked if we could see the camera on our cell phone? I didn't know how to do it with BI so installed Amcrest view pro on phone, I had to change the password in the app just to use it and scanned the...
  17. matchewready

    Questions about a new set up

    Thanks for all the advice, I've read through the wiki and cliff notes but still couldn't find exactly how the switch connects with my pc. Like I mentioned my cable modem is also my router, so do not connect the switch to it at all, got it! So uplink cable from switch goes directly to my...
  18. matchewready

    Questions about a new set up

    I'll start by saying I'm new to the whole security camera world, here is what I ordered so far BV-Tech 9 Port PoE+ Switch (8 PoE+ Ports | 1 Uplink Port) – 120W – 802.3af/at Amcrest IP5M-T1179EW-28MM) SV3C 3Megapixels IP Camera Amcrest Cat5e Cable 100ft Ethernet POE Cables 4 pack Plan on...
View older results
Top Bottom