Search results

  1. jmcu

    Latest New NVR5xxx-4KS2 General_NVR5XXX-4KS2_MultiLang_V4.001.0000006.1.R.210709

    I will give it try after another reset, but I tried several roll backs and had no luck.
  2. jmcu

    Latest New NVR5xxx-4KS2 General_NVR5XXX-4KS2_MultiLang_V4.001.0000006.1.R.210709

    DH_NVR5XXX-4KS2_MultiLang_V4.002.0000000.1.R.211231.bin I have put this on a new 5208-4ks2 - *no longer have Live View - AI mode on the main display, it is there but nothing populates the side bar. *Also have see that the PTZ linkage on IVS trigger no longer works. It will not save when applied...
  3. jmcu

    Alarm Out -- Not working

  4. jmcu

    Alarm Out -- Not working

    Very cool !! It definitely sounds do like you know what your doing. I never had one loose all the settings before. Sorry to hear that..
  5. jmcu

    Alarm Out -- Not working

    What are you using the alarm output for? If it is for IVS notification this is not what they do. If that has stopped working try updating your APP. The alarm outputs on the back are for sirens, lights, horns, dorbells or what ever else you want to hook up to them. They normally require power in...
  6. jmcu

    Dahua DMSS App: Change request to support motion alarm video caching on device, anyone?

    "voice of the customer" or "request" to Dahua ? That's hilarious.. :lol:
  7. jmcu

    Smart PSS not showing IVS triggers on PC NVR recordings.

    Did you click the gear to the right in the record plan and ensure IVS was selected ?
  8. jmcu

    Is it possible to add VTO to NVR

    Do you see what firmware is on the VTO and VTH? You can use the Dahua config tool. After much trouble connecting the VTO with the VTH the FW update resolved this.
  9. jmcu

    Is it possible to add VTO to NVR

    If the NVR changed the VTO's IP address from what it was from when you set it up.. then the VTH will not work. Depending how you added the VTO to the NVR. You can look on the NVR to see what the IP address is .. Is this a PoE nvr?
  10. jmcu

    Dahua Starlight 40x PTZ - SD6AE240V-HNI

    I agree.. it was one of my favorite PTZ cams as well.
  11. jmcu

    Is it possible to add VTO to NVR

    Yes you can add it to the NVR, you can search with the Add Camera and select it that way. You can also set up video detection under the alarm section but It does not seem to stay locked into the VTO longer than a day or so.
  12. jmcu

    Remote network using a bridge for cameras?

    There are a couple good videos on YT on how to set them up.. I recommend getting them all set before you mount them, then all you have to do is aim them. its not too bad..
  13. jmcu

    Looking for a NYC Area Installer - Or Someone who can configure .

    You only need 1 hard drive for the NVR. You can rename the cameras in the settings. Main menu... system...camera icon.. top left.. camera name.. These NVRs are pretty simple to use.. you just need to learn where all the settings are.. and there are a lot.. it takes a little time.. Are you...
  14. jmcu

    Dahua NVR input /output alarm video

    Here is a video I put together to show how you could use the alarm input and output on a Dahua NVR 5216-4kS2. The relays on the NVR are only rated at 1 amp so you have to be carful when supplying input power for what ever you use for the output alarm.
  15. jmcu

    Remote network using a bridge for cameras?

    If you use the Loco post a follow up on how they work for you.. I like cheap too.. lol
  16. jmcu

    Remote network using a bridge for cameras?

    The nanobeams work great, I have used them on several jobs without any issues in all type of weather but never used the Locos.
  17. jmcu

    Dahua PFB203W vs PFB204W

    Same size
  18. jmcu

    49225XA and Face Detection..

    Has anyone had the face detection set up on this cam? I normally use IVS but wanted to play around with the FD feature. I was trying to get FD set on 1 preset and IVS on another preset. The smart plan allows you to change each preset but does not seem to work. Has anyone set this camera up...
    • jmcu
    • Thread
    • Replies: 0
    • Forum: Dahua
  19. jmcu

    Dahua "IPC-HDW5442TM-ASE" VS "IPC-HDW3441EM-AS"

    I would agree that the 5442 is a better camera, day and night. It is hard to beat the image with this camera both turret and bullet.
  20. jmcu

    Dahua NVR and Honeywell cameras with pauses in live stream

    It was still skipping @15 /1k ? Have you also tried the monitor directly to the NVR and still have the issue? Someplace on the nvr you should be able to see the load for each camera.. I am not if front of it right now to check .. I never had a good experience with the 4xxx NVR's. I know they...
  21. jmcu

    Dahua NVR and Honeywell cameras with pauses in live stream

    Have to tried the H264 to see if the frame skipping goes away ? Troubleshoot 1 cam and see if it still happens and then add 1 each time to see when it starts.
  22. jmcu

    Live Streaming

    The audio was the biggest challenge for me as well.. I have not seen any IP cameras that had great audio. The Behringer 202 is a USB interface for going into a PC. You can not come out of a speaker to the input of this device. You can use XLR or 1/4 microphone connection or line in to it.
  23. jmcu

    Crypto Currency Chat

    The power generating plant I work at has just been approached for a buyout from crypto miners. They say they will mine about 8-9 BTC / Day, cheap gas and electric is what they want. Not a bad days return, just the capitol to get started is costly..
  24. jmcu

    Live Streaming

    I have finished up a church streaming project and am working on another, I couldn't see buying the PTZoptics for the price either. I used a SD-49225xa with xsplit broadcaster in place of OBS for the ease of learning for the user. The main trouble came when trying to get the audio feed into the...
  25. jmcu

    HTTPS certificate

    If you look at the top when you make your certificate there is a tab called "Trusted CA Certificates"
  26. jmcu

    purchase new system

    Here= @EMPIRETECANDY via email kingsecurity2014@163.com for orders and support. My store address: Amazon shop | AliExpress
  27. jmcu

    Dahua PTZ controller (PC)

    I was looking for a simple windows software GUI that I could control Dahua PTZ's without logging into each browser for every camera or smart PSS that wouldn't take up much screen space for a project I am working on. I came across a nice little program called EZPTZ by ALEC BENNETT AND GIZMOWARE...
    • jmcu
    • Thread
    • Replies: 1
    • Forum: Dahua
  28. jmcu

    Dahua Push Notifications?

    The NVR check never works to tell you if there is a FW update, so don't count on that.
  29. jmcu

    View Dahua camera's rtsp stream with Raspberry Pi omxplayer

    You can use rpisurv - SvenVD/rpisurv It works great and will restart if you disconnect, even if a camera feed goes down it will continue to try and reconnect.
  30. jmcu

    Dahua new AI and WizSense models for wildlife (Few Demos)

    I have tried many different PTZ's with the new AI algorithm for wildlife and they are too smart.. lol They work great for what they are designed for, stopping false alarms, but no longer good for "trail cams " Even with object filter turned off, and no matter what IVS rule you use it does not...
Top Bottom