Search results

  1. Teeauu

    Unable to add Jide Tech IP camera

    Try setting Make: Cantonk Model: H254 port 34567 Video Stream : /user=admin_password=x2A5wTbj_channel=1_stream=0.sdp?real_stream
  2. Teeauu

    My WD Purple HDD is too big for my AIO Dell OptiPlex 7460

    Or strip the Dell guts out and put them in an aftermarket case. You would need to know what kind (type) of motherboard you have in order to buy the right case. Then you can put the drive in the case as intended.
  3. Teeauu

    CPU's ???

    Actually that may be the wrong thread but it is the right answer.
  4. Teeauu

    CPU's ???

    I am currently running 28 4mp and 6mp Dahua cameras setup for substreams and am running between 14% and 17% CPU on an I7-8700 @ 3.2GHz . Amazing. The best upgrade yet, worth the money and then some for yearly licensing. ETA I am not running max FPS but I am running the max resolution.
  5. Teeauu

    Larger system unstable - where's the issue?

    Absolutely if I was to go a distance. I'm going up a 150 foot drive with a bend in the middle so I have 2 radios in the middle and one at either end. Trust me, works great, incredible WiFi with neg 65 being the worst. Solid connection. AC connections are great. I too do a lot of networking and...
  6. Teeauu

    Larger system unstable - where's the issue?

    If I was doing this at work I would use a completely different Ubiquiti. For home these work exceptionally well and have the same Ubiquiti performance and reliability. Remember I don't need a large number of logins or huge amounts of bandwidth. I need reliability and a reasonable amount of...
  7. Teeauu

    Larger system unstable - where's the issue?

    I'm a little late to the party but... BP2008 you hit it on the head, good quality radios are what is needed, you can achieve the equivalent of wired cameras with Ubiquity radios for the backbone and cameras connected to them through a quality switch. Forget the WiFi in the cameras as someone...
  8. Teeauu

    Dual NIC setup on your Blue Iris Machine

    If you are a network engineer you could use ACL's and block the cameras by MAC. The best thing to do in this case would be to have an allowed none rule and then specifically allow the devices that you want to have internet access. The nice thing about two NIC's are that there is no DG so the...
  9. Teeauu

    Dual NIC setup on your Blue Iris Machine

    Dual nics are simpler and in my case faster. GB switches and a GB network seem to work faster than a GB router and switches.
  10. Teeauu

    Dual NIC setup on your Blue Iris Machine

    I've been using VLAN's for years and when I updated my routers in the last year I found out that some things I've done in OpenWrt on some of the newish TP-Link routers didn't work the same. This morning before the sun came up (and it was still relatively cool in the atic) I finally pulled...
  11. Teeauu

    Surprised so many people are OK with WPA2-PSK

    I tried them as recently as a year ago, really no better.
  12. Teeauu

    Surprised so many people are OK with WPA2-PSK

    I tried TP-Link power line adapters and had a lot of problems with them. I have no problems with my current setup.
  13. Teeauu

    Surprised so many people are OK with WPA2-PSK

    As others have said, buy a good quality camera (Dahua's are a favorite of mine) and then put good network gear up to support it. I have camera's all over my property as we have a number of show dogs and live in a secluded location and that is what I do. Ubiquiti AP's all over the place and they...
  14. Teeauu

    BI after an unexpected power outage... stuck at 100% CPU

    Thank you for the advice.
  15. Teeauu

    BI after an unexpected power outage... stuck at 100% CPU

    3746 in c:\blueiris\new, 2 to 11meg each. 1825 500kish files in c:\blueiris\alerts Creating a new file for every trigger.
  16. Teeauu

    BI after an unexpected power outage... stuck at 100% CPU

    c:\blueiris\db is on the Evo SSD
  17. Teeauu

    BI after an unexpected power outage... stuck at 100% CPU

    No, actually the c:\blueiris folder is on an Evo 860, after 24 hours it moves to slower drives.
  18. Teeauu

    BI after an unexpected power outage... stuck at 100% CPU

    I deleted my db folder, rebooted and let it rebuild which took about 18 hours. But I now have 1.53 GB folder, so thank you all.
  19. Teeauu

    BI after an unexpected power outage... stuck at 100% CPU

    So what is a typical size for clips.dat with 25 4 or 5 mega pixel cameras averaging 10 FPS and all running H264 or H265? I'm currently at 30G which doesn't seem excessive to me. Thanks!
  20. Teeauu

    Cams bounce between "No Signal" and connecting fine

    IMO cameras and WiFi doesn't mix. If you are going to use cameras and don't have an Ethernet or Fiber run there, use a quality AP, don't depend on the WiFi card that is in the camera.
  21. Teeauu

    New computer and I enabled H265+ and Hardware accelerated decode

    And I appreciate that :)
  22. Teeauu

    New computer and I enabled H265+ and Hardware accelerated decode

    Thank you. That I didn't know about 265+.
  23. Teeauu

    New computer and I enabled H265+ and Hardware accelerated decode

    So then if you have the camera set for 265+ does it downgrade the stream to 265?
  24. Teeauu

    New computer and I enabled H265+ and Hardware accelerated decode

    I had Hardware accelerated decode turned on in V4 and it did a respectable job. I now am on a new computer (I7-8700) and installed V5 at the time as I recall. I went through today and enabled the H265 profile on my cameras. All I can say is I am impressed, 23 cameras between 3 and 5 Mega pixels...
  25. Teeauu

    Brand Name of your Solid State Disk (SSD)

    Samsung EVO 860. Great drives and I have a half a dozen of them. Current one I bought is 1TB.
  26. Teeauu

    Who runs 6+ 1080p wireless cams flawlessly (no disconnects) in there BI environment?

    17 of my cameras are used wirelessly. IMO the trick is to connect them to a quality managed switch and use quality WiFi equipment to send them back to 'home base'. We live on 5 acres and about 2 acres are totally covered. I use Ubiquity AP's and Ubiquity Edgerouter-X switches, all running...
  27. Teeauu

    High CPU Useage on 22 Camera build system

    I have 12 720P cameras capped at 10 fps on an I5-650 (2 cores 4 threads), 8G of memory, Windows 10 64 bit. Runs at about 45% of CPU. Just a benchmark for anyone that is interested.
  28. Teeauu

    High CPU Useage on 22 Camera build system

    Went back to 4.5.3.2 and that returned the previous performance. Thank you for your help.
  29. Teeauu

    High CPU Useage on 22 Camera build system

    Thank you
  30. Teeauu

    High CPU Useage on 22 Camera build system

    Hi, new member here. I am experiencing huge slowdown issues with 4.5.3.7 and have checked whatever I can. Which site are you referring to to try an older update file? Thank you.
View older results
Top Bottom