Search results

  1. C

    Dahua IPC-HDBW3849R1-ZAS-PV replacement

    What do you think about these cameras? Don't they have even better night vision?
  2. C

    Dahua IPC-HDBW3849R1-ZAS-PV replacement

    Dome and Turrent Versions.
  3. C

    Dahua IPC-HDBW3849R1-ZAS-PV replacement

    So should I use the 5442-ZE-S3 instead? Do you happen to have a link to the camera?
  4. C

    Dahua IPC-HDBW3849R1-ZAS-PV replacement

    This is what night vision looks like for me. I only have the lantern there and otherwise a floodlight comes on when someone walks into the driveway. These areas marked in red are important to me. The other camera has this view on the street.
  5. C

    Dahua IPC-HDBW3849R1-ZAS-PV replacement

    Hello, I would like to exchange my Dahua IPC-HDBW3849R1-ZAS-PV for a better full color camera with a sensor of 1/1.2 or 1/1.8. do you have any recommendations ? How important is a camera with a motorized vari-focal lens ?
  6. C

    Dmss Kamera Replay Problem ( 5208-8p-EI )

    With the local Ip, the videos match the camera. However, the snapshots are not displayed correctly there. An ivs event has a snapshot where it is dark outside although it was triggered during the day. 2pm
  7. C

    Dmss Kamera Replay Problem ( 5208-8p-EI )

    Yes, I removed the old HDD and then formatted the new one. All IVS events are displayed in the NVR. I can look at them without any problems. This is what the HDD values look like. Couldn't it also be due to the new firmware upgrade from the NVR?
  8. C

    Dmss Kamera Replay Problem ( 5208-8p-EI )

    I have activated the recordings in the camera for 15 seconds after the event and now I have the recordings again in the Nvr. However, I still have the problem in the app.
  9. C

    Dmss Kamera Replay Problem ( 5208-8p-EI )

    I added an additional 3Tb today. The problem is still that channel 2 does not show any ivs in the Nvr. I suspect that the Dmss app has also broken things with a new update. I find the same problem in the reviews.
  10. C

    Dmss Kamera Replay Problem ( 5208-8p-EI )

    Okay, thank you very much, I have understood. I'll look out for that tomorrow when someone triggers the ivs. When I go to Device in Dmss and then to the respective camera I have the replay problem. However, if I go to message in the middle and then look at the replays everything works without...
  11. C

    Dmss Kamera Replay Problem ( 5208-8p-EI )

    Yes, I only have one HDD installed in the Nvr. Do I only have to update the snapshots in the Nvr or also in the cameras? I have now set it up like this. If the hard disk already has lost data, it should also be the case with the others or not?
  12. C

    Dmss Kamera Replay Problem ( 5208-8p-EI )

    I have ivs rules on channel two, but nothing is saved in the Nvr. This is only the case with camera 2.
  13. C

    Dmss Kamera Replay Problem ( 5208-8p-EI )

    Yes I did before adding. Channel 5 shows the pictures and the other 3 cameras not in DMSS. Only Channel 2 has no IVS recordings in the NVR under Ai events. Nothing happens when I want to check the status of the HDD.
  14. C

    Dmss Kamera Replay Problem ( 5208-8p-EI )

    I have added the Nvr via the P2p option as before. I use the Nvr via the browser with plugin. What I find strange is that when I go to news and then watch the reruns, everything is normal. However, if I go to the camera and watch the videos, it says there are no recordings.
  15. C

    Dmss Kamera Replay Problem ( 5208-8p-EI )

    Hello, I have a problem with the Dmss app. For example, when I look at an ivs event from the camera in the garden, it shows me one from another camera or tells me there is no recording. Before everything worked without problems when I added the Nvr again I had the problems. What I also find...
  16. C

    Empiretech PTZ4K45X-AI settings

    Try IVS Sens : 8-10
  17. C

    Dahua N3wbie , can’t figure out why IVS events won’t record

    What's wrong with Tioc cameras? I need it for my fence at the entrance to the garden.
  18. C

    Dahua N3wbie , can’t figure out why IVS events won’t record

    What I am wondering is where I can activate the siren and the lights of my Tioc camera myself as in the app or the camera menu. Do you happen to know that?
  19. C

    Dahua N3wbie , can’t figure out why IVS events won’t record

    Ah okay, thank you very much. Do any of you use Smartpss Lite?
  20. C

    Dahua N3wbie , can’t figure out why IVS events won’t record

    No, I just liked that it triggers when someone walks into my driveway. I have adapted it slightly.
  21. C

    Dahua N3wbie , can’t figure out why IVS events won’t record

    What do you think about these two rules? Just lower the box a little or change it completely?
  22. C

    Dahua N3wbie , can’t figure out why IVS events won’t record

    That's what happened today. I think I need to move the box further down.
  23. C

    Dahua N3wbie , can’t figure out why IVS events won’t record

    I have set 24/7 in the Nvr. I have switched everything off in the camera menu.
  24. C

    Dahua N3wbie , can’t figure out why IVS events won’t record

    Yes, that's right. My recordings look like this overnight.
  25. C

    Dahua N3wbie , can’t figure out why IVS events won’t record

    I have now set it like this. Is that right or ?
  26. C

    Dahua N3wbie , can’t figure out why IVS events won’t record

    This only happens with the two cameras when I activate Motion Detection in the schedule. I think that's why it interrupts the recording. However, I will turn it off again. The recording is missing there completely.
  27. C

    Dahua N3wbie , can’t figure out why IVS events won’t record

    But I would like to see who has walked past my house and possibly spied on me. Can you tell me why I have interruptions with two cameras in the 24/7 recording?
  28. C

    Dahua N3wbie , can’t figure out why IVS events won’t record

    Many thanks for the quick help. I have now drawn it in like this. Is it correct to only use motion detection? I have SMD off and use the ivs rules with human and car.
  29. C

    Dahua N3wbie , can’t figure out why IVS events won’t record

    What do you think about my Ivs rules? I want to track intruders that come where the red line is drawn. There is a small gate around the corner on the right. I use video detection and ivs rules for my four cameras. ( IPC-HDBW3849R1-ZAS-PV )