Search results

  1. redfive

    4.0 AI version NVR5XXX-4KS2_MultiLang_V4.000.0000001.2.R.20191101

    @MakeItRain I haven't been able to get any sub-stream, with this firmware (gDMSS, SmartPSS, and not even with I.E. or I.E. tab), only the main stream. I too reverted to 2019-08-09 version.
  2. redfive

    4.0 AI version NVR5XXX-4KS2_MultiLang_V4.000.0000001.2.R.20191101

    Brief test, not able to get camera's sub-streams from NVR, IPC's aren't hooked up directly to the NVR, are around, but in the same network/VLAN. Same issue as previous firmwares, reverting back to V4.000.0000000.1.R.20190809 solves.
  3. redfive

    Big update!! NVR5XXX-4KS2_MultiLang_V4.000.0000000.0.R.20190713

    moved to correct 3d
  4. redfive

    Review: Dahua HFW5442T-ASE 4MP Starlight+

    Oh, thanks, that fw does work fine for me as well, never had any issue since the upgrade.
  5. redfive

    Review: Dahua HFW5442T-ASE 4MP Starlight+

    @bigredfish Is there a new firmware, or is the one provided by Andy time ago ?
  6. redfive

    NVR4XXX-4KS2_MultiLang_V4.000.0000001.1.R.190830.zip

    Even here is monday .... :( :) Anyway, I've found some bugs as well, for now, reverted back to previous version (1.0)
  7. redfive

    NVR4XXX-4KS2_MultiLang_V4.000.0000001.1.R.190830.zip

    @Wildcat_1 I've tested the DH_NVR5XXX-4KS2_MultiLang_V4.000.0000001.1.R.20191016.bin on some 5208/5216's, but I was referring to the NVR 4XXX-4KS2 (which ends with 1.3), not the 5XXX-4KS2 (which ends with 1.1), unless you have the 1.3 for the 5XXX series ...:)
  8. redfive

    NVR4XXX-4KS2_MultiLang_V4.000.0000001.1.R.190830.zip

    Anyone has tried the DH_NVR4XXX-4KS2_MultiLang_V4.000.0000001.3.R.191016 ?
  9. redfive

    Big update!! NVR5XXX-4KS2_MultiLang_V4.000.0000000.0.R.20190713

    Your cameras are hooked up directly to the NVR's inbuilt PoE switch, or are around, on the network ?
  10. redfive

    Big update!! NVR5XXX-4KS2_MultiLang_V4.000.0000000.0.R.20190713

    @PCXNetworks Are you able to see the sub-streams, in the NVR web GUI ?
  11. redfive

    New Firmware for IPC-HX5X3X-Rhea_Eng_NP_Stream3_V2.800.20190807

    Well, I don't remember (maybe/most probably yes..) but the command works even if I execute it from my unifi controller key root@unifikey:~# curl -s --globoff --digest --user xxxx:yyyy "http://1.2.3.4/cgi-bin/devVideoInput.cgi?action=autoFocus" OK root@unifikey:~#
  12. redfive

    How to adjust Dahua Day/Night switch sensitivity?

    Set profile to Normal, save, then adjust the sensitivity , save, set again the profile to day/night.
  13. redfive

    New Firmware for IPC-HX5X3X-Rhea_Eng_NP_Stream3_V2.800.20190807

    The DH ones for all cameras (except the B5442E-ZE, which has the General one)
  14. redfive

    New Firmware for IPC-HX5X3X-Rhea_Eng_NP_Stream3_V2.800.20190807

    Yes, working with latest fw's on all cameras.
  15. redfive

    Camera shows double in SmartPSS and on NVR

    And if you delete both, and then re-add the same camera ? Or, if you forget the cameras (under maintenance, default, check only camera) and then re-add the two cameras ?
  16. redfive

    Camera shows double in SmartPSS and on NVR

    And what if you delete one of the doubled camera ?
  17. redfive

    New Firmware for IPC-HX5X3X-Rhea_Eng_NP_Stream3_V2.800.20190807

    @!NoName! Not tested other things, but I use, curl -s --globoff --digest --user <user>:<password> "http://a.b.c.d/cgi-bin/devVideoInput.cgi?action=autoFocus" For auto-focus via cron-job, and it still work
  18. redfive

    Big update!! NVR5XXX-4KS2_MultiLang_V4.000.0000000.0.R.20190713

    Mmm ... not able to get sub-streams of the cameras from NVR , reverted back to previous fw, sub-streams ok.
  19. redfive

    Big update!! NVR5XXX-4KS2_MultiLang_V4.000.0000000.0.R.20190713

    Not tested in deep yet, but noticed a couple of things, it asks to install the plugin for the video previews in the AI events, and the PEAP, using dot1x, seems not working anymore, I switched to EAP-TLS (creating and loading cert and key), NVR successfully authenticated.
  20. redfive

    I did a factory reset for NVR and now the cameras are locked

    Maybe something like this could help ?
  21. redfive

    I did a factory reset for NVR and now the cameras are locked

    I mean, are the cameras hooked up directly to the NVR ? If yes, didi you try by connecting a laptop to the inbuilt swicth of the NVR, set a static ip address consistent (eg.10.1.1.100 ?), and try to connect the cameras on their shown ip address ?
  22. redfive

    I did a factory reset for NVR and now the cameras are locked

    Can you edit the camera, in the NVR menù, using the old NVR's password ? Of course if you have forgot the old password .... :) You may have to reset the cameras as well, since the cameras may take the NVR password, when associated to the NVR (with old version, you can try with admin admin, but...
  23. redfive

    IPC-T5442TM-AS Auto IR bug fixed firmware 20190930

    Can you try by downgrading to the linked one, and then upgrade again to the latest ?
  24. redfive

    IPC-T5442TM-AS Auto IR bug fixed firmware 20190930

    @Arjun Which firmware was installed on the cams, before upgrading to the latest (SmartIR fix) ? This one ?
  25. redfive

    IPC-T5442TM-AS Auto IR bug fixed firmware 20190930

    Just to be sure, the IVS is enabled in the 'Smart Plan' ?
  26. redfive

    IPC-T5442TM-AS Auto IR bug fixed firmware 20190930

    I too didnt see the 'Algorithm authorization expired, please update license' message, moreover, the 'IVS as well as the 'Face detection', seem working fine (to be honest, these features were working even with the pre-loaded firmware). @betogar Did you try a factory-reset ?
  27. redfive

    Review-OEM 4mp AI Cam IPC-T5442TM-AS Starlight+

    @looney2ns have a look here
  28. redfive

    Review-OEM 4mp AI Cam IPC-T5442TM-AS Starlight+

    Well done, @looney2ns ! I too have installed the new fw, not tested in deep yet. By any chance, did you play with the IVS, Global Setup ? I'm not been able to correctly validate the calibration (yet, since is always reported the double of the actual length), have to play with it again.
  29. redfive

    Unable to draw rule for intrusion/trip wire for IVS

    Did you try a factory-reset and/or reload the fw ?
  30. redfive

    Unable to draw rule for intrusion/trip wire for IVS

    Do you mean that you are using chrome with ie-tab extension ?
Top Bottom