Search results

  1. Captain_B

    SD6AL433XA-HNR Laser PTZ Tracking Issue

    I have substreams off for all cameras to save bandwidth. On one of the PTZ's the Cat6 cable run is only 200 feet, the second PTZ has 60 foot Cat6 cable to a Nano Station with a clear line of sight to its Access Point. All cameras are on 15 FPS, bit rate 8192, Encode H.264.
  2. Captain_B

    SD6AL433XA-HNR Laser PTZ Tracking Issue

    I will be getting Wildcat hooked up remotely, hopefully this evening. I checked and both PTZ's cameras have the following storage settings, but do not have SD cards, could this be why I am getting a pause on live view and recordings?
  3. Captain_B

    SD6AL433XA-HNR Laser PTZ Tracking Issue

    BigRedFish: Not sure about the first PTZ since I haven't tried posting any videos with it since it was first installed, may try tomorrow. The second PTZ on live view watching through Smart PSS seems flawless and worked well on Playback at first but changed the night before and much worse last...
  4. Captain_B

    SD6AL433XA-HNR Laser PTZ Tracking Issue

    What I am running. My NVR is: NVR5216-16P-I 8 Cameras: IPC-HFW5241E-Z12E 2 PTZs: SD6AL433XA-HNR Laser
  5. Captain_B

    SD6AL433XA-HNR Laser PTZ Tracking Issue

    I have a H264, H264B, H264H, which one?
  6. Captain_B

    SD6AL433XA-HNR Laser PTZ Tracking Issue

    Will do now.
  7. Captain_B

    SD6AL433XA-HNR Laser PTZ Tracking Issue

    Video compression is not a concern, I have twin 10 TB WB Purple Drives and very little activity up here.
  8. Captain_B

    SD6AL433XA-HNR Laser PTZ Tracking Issue

    BigRedFish: Do you think changing my encoding would help? I would do anything to get mine running like yours, please let me know how to make it happen sir, thanks.
  9. Captain_B

    SD6AL433XA-HNR Laser PTZ Tracking Issue

    Thank you guys for your help last night. In regards to a resource issue with the NVR, I just went in and made sure and actually had to change a couple of the spotter cams to H265 encoding, Smart Codec off, Resolution 1920*1080, 15 FPS Bit Rate Type CBR, with matching IFrames, and 4096-bit rate...
  10. Captain_B

    SD6AL433XA-HNR Laser PTZ Tracking Issue

    Round #2: I did not put an SD card in it and I doubt there is one in it from the factory. I am using Smart PSS to render recordings/playbacks. Below are some adjustments based off of your comments and thank you wittaj for responding.
  11. Captain_B

    SD6AL433XA-HNR Laser PTZ Tracking Issue

    I really wish I knew why it is skipping frames and going fast forward on the video.
  12. Captain_B

    SD6AL433XA-HNR Laser PTZ Tracking Issue

    Tree is DOWN! Only changes made from the previous settings listed below. I can make the laser intensity much stronger but it blossoms the person even more.
  13. Captain_B

    SD6AL433XA-HNR Laser PTZ Tracking Issue

    Video 1 and 2 have the following settings: (note, by lowering the laser angle it will bring more light further away, and for reference, the guy never got closer to the camera than 300 feet due to it not tracking the subject. The third video has...
  14. Captain_B

    SD6AL433XA-HNR Laser PTZ Tracking Issue

    Agree but no additional (white) lighting is allowed. There are no outside lights in this entire area, you may notice in the video, as she was walking last night I was talking to her on her phone's earbuds telling her to go left or right due to how dark it is with no moonlight or flashlight...
  15. Captain_B

    SD6AL433XA-HNR Laser PTZ Tracking Issue

    The videos were perfect in SmartPSS when I watched them but when they are exported you get these fast-forward bursts for a second or two, any idea what is causing that?
  16. Captain_B

    SD6AL433XA-HNR Laser PTZ Tracking Issue

    One more setting I forgot to attach:
  17. Captain_B

    SD6AL433XA-HNR Laser PTZ Tracking Issue

    I am uploading 3 different videos from last night (hopefully - new modem should fix past upload issues, will see), the first is possibly too bright and tracking did not work. The second one below is better but no tracking. The tracking issue could have been me in there...
  18. Captain_B

    Proper Wiring Ubiquiti NanoStation NSM5 - Help Please

    Yes sir, it's plugged into the Station and the Access Point is plugged into my router so I can connect to both of them.
  19. Captain_B

    Proper Wiring Ubiquiti NanoStation NSM5 - Help Please

    Good point Flintstone61, I was thinking what I was looking at was max capacity not actual.
  20. Captain_B

    Proper Wiring Ubiquiti NanoStation NSM5 - Help Please

    RedFive: Below is from the station using 10MHz width but I notice my TX/RX Rate has dropped from 162 Mbps at the 20/40MHz width (Access Point at 40MHz width setting) but signal strength is at the max. Also below is a picture of the Access Point, any help to get my Mbps up to 300 like yours...
  21. Captain_B

    SD6AL433XA-HNR Laser PTZ Tracking Issue

    BigRedFish: I hope your Mom is doing better and if it's not raining I will get some video tonight.
  22. Captain_B

    SD6AL433XA-HNR Laser PTZ Tracking Issue

    UPDATE: I installed the second 433XA PTZ and noticed how much clearer the picture was than the first one I installed several weeks back. So I decided to climb the tower with some cleaner and clean the lens on the first camera (the pictures above are from the first camera). I cleaned the lens...
  23. Captain_B

    Proper Wiring Ubiquiti NanoStation NSM5 - Help Please

    10.1.1.74
  24. Captain_B

    Proper Wiring Ubiquiti NanoStation NSM5 - Help Please

    Interesting, I plugged the Access Point back into the NVR after hooking the LAN connection from the PoE injector for the Nano into my router so I could get the screenshot above from the Nano and now the NVR has the camera offline. I'll go down and cycle the power to the PTZ and see if it comes...
  25. Captain_B

    Proper Wiring Ubiquiti NanoStation NSM5 - Help Please

    Redfive: This is the access point above with the antenna mounted inside looking through a window. The station is 600 feet away and 40 feet lower in elevation. When I tried lowering my channel width at the access point to 10MHz it lost connection with the station. Any thoughts?
  26. Captain_B

    Proper Wiring Ubiquiti NanoStation NSM5 - Help Please

    TonyR: Unbelievable knowledge I picked up from you guys, it really helped me begin to understand networking, wifi, routers, etc which I am fascinated with. I really wanted to learn each aspect of it and gain some understanding of how it works, so no, if I had to do it over again I would have...
  27. Captain_B

    Proper Wiring Ubiquiti NanoStation NSM5 - Help Please

    I power cycled the PTZ and came back to the residence and the NVR sees it now and everything is working perfectly! THANK YOU Catcamstar, TonyR, Redfive, Flinstone61, Wildcat_1, Jessie_Slimer, you made my month and a long month it has been on this end. Great job, I really appreciate it, and...
  28. Captain_B

    Proper Wiring Ubiquiti NanoStation NSM5 - Help Please

    Catcamstar: Yes sir, Port 10 on the NVR is plugged into the LAN port of the Ubiquiti PoE injector. I have put no static IP address in the camera and I will go down there now and power cycle the camera and reply back.
  29. Captain_B

    Proper Wiring Ubiquiti NanoStation NSM5 - Help Please

    TonyR: I went down to the Station/Bridge, connected my laptop and tried to access the internet, no joy. I then logged into the Nano and found the WDS not enabled. I enabled WDS and then tried the internet again and it connected no problem. I hooked the PTZ back up to the PFA1200 and the...
  30. Captain_B

    Proper Wiring Ubiquiti NanoStation NSM5 - Help Please

    TonyR, for some reason I didn't see your post earlier, the answer is no, I do not know what I'm doing in setting up this bridge, any help would be greatly appreciated, and thank you for your response.
Top Bottom