Search results
-
M
Problem with DAHUA PTZ DH-SD59430U-HNI black screen random.
Hello again, At this point I think the problem is in the CA-HZ4030U module and specifically the shutter control. I saw that in the electromagnetic mechanism that regulates how much the shutter is open there is also electronics, which is not clear what it does. But it comes with the entire... -
M
Problem with DAHUA PTZ DH-SD59430U-HNI black screen random.
Yes. I also read a lot before writing here, but I didn't find anything like it anywhere. The only thing I'm thinking about is removing the back cover of the camera and leaving it running like that for a few days. To check if there will be a change. Because the camera is heating up. The stepper... -
M
Problem with DAHUA PTZ DH-SD59430U-HNI black screen random.
No. It looks exactly the same. -
M
Problem with DAHUA PTZ DH-SD59430U-HNI black screen random.
Okay :) Everything is default. It's the same during the day. I could stick black tape over the infrared LEDs, but I don't think it would make any difference. Or I could turn them off in software or directly from the connector. -
M
Problem with DAHUA PTZ DH-SD59430U-HNI black screen random.
Yes. They work. All four infrared LEDs work. -
M
Problem with DAHUA PTZ DH-SD59430U-HNI black screen random.
Yes of course POE+. It's currently on the workbench and the cable to the switch is 1.5 meters. Look at the picture from that moment. I restarted the camera. The room is completely dark. -
M
Problem with DAHUA PTZ DH-SD59430U-HNI black screen random.
Hello, The problem with the IP camera is as follows. At first, the camera shows a normal image when it is first turned on (it has not yet warmed up that much). The room I am testing the camera in is about 25C. Sometimes it can work for days, and sometimes after 20 minutes it starts to show a... -
M
Hikvision DS-KV8213-WME1 ONVIF not working
Couldn't get it to connect to the dahua nvr. And I haven't tried again. I may take to look for a solution... Or if there is another firmware that gives access to the operating system of the camera itself. -
M
Hikvision DS-KV8213-WME1 ONVIF not working
Thanks to all who answered. I will check the configurations and write further. What version of asterisk are you using? I am using asterisk-18.14.0. PJSIP -
M
Hikvision DS-KV8213-WME1 ONVIF not working
Hello, Thank you for the reply! I would appreciate it if you could give me some pointers. I'm a Linux admin and I think I'll have no problem handling the settings. I even think it's good to have it described somewhere publicly so that someone else can configure everything if they want to. I... -
M
Hikvision DS-KV8213-WME1 ONVIF not working
The intercom is connected via Ethernet( Power over Ethernet) . I don't see how I can turn off rstp authentication. I know the communication is in plain format, but to be able to listen to the traffic it needs to be in the middle (Man in the middle attack - and tcpdump or wireshark or port... -
M
Hikvision DS-KV8213-WME1 ONVIF not working
I tried. Doesn't want to connect with nvr. This intercom (Hikvision DS-KV8213-WME1 ) does not support these protocols. And there are no settings. If it was a Hikvision ip camera all this is available as settings… There is only one admin user and only one option to change the password... -
M
Hikvision DS-KV8213-WME1 ONVIF not working
Hello! Thanks! I reduced the password which was 20 characters to 11 characters (lowercase and uppercase letters and numbers) and now I can watch stream via VLC (10 seconds delay before i see image). But NVR says: "the login return time is up" I can't figure out since Hikvision has a limit of 8... -
M
Hikvision DS-KV8213-WME1 ONVIF not working
Hello, I am trying to connect Hikvision DS-KV8213-WME1 to DAHUA NVR5208-4KS2 V4.002.0000000.4.R (ONVIF protocol), but without success. DS-KV8213-WME1 firmware is V2.2.53 build 220816. I don't see any option on DS-KV8213-WME1 about configuring a separated ONVIF account. I am trying to... -
M
Dahua IPC-HFW5541T-ASE POE not working
Hello, I have this camera Dahua IPC-HFW5541T-ASE, but it doesn't want to work through POE(Switch not show POE activity on port). Works normally when powered by 12V DC. POE power supply is made with SD4923E (U9 marked on PCB) (POE PD Controller). Next to this IC is A0FBMF (U8) ( I can't find...