Search results

Yes, on the DS-9632NI-I8 there are two LAN ports. I use one to connect through the network/Web GUI and the other is on a separate network (192.0.0.64) for the cameras only. All this time I was using the first port to do the TFTP, then just when I was about to give up I remembered there's a...

UPDATE: I finally got through!!!. I realized that I had been trying to go through only one LAN port when the other was configured with IP 192.0.0.64. Once I connected it and rebooted the NVR. It installed the firmware and reset it to factory defaults. Now I have to reconfigure the NVR. Many...

I disabled the firewall and made another attempt. Initially I only got what I sent in my previous post but after restarting the NVR I got this message "08/17/20 15:04:06: received unexpected tftp bytes '417265636f6e745f566973696f6e2d41563230303001' from 192.168.120.200:3352" and nothing after...

I made another attempt and configured my computer's IP address to 192.0.0.128\24. The IP address on the NVR is 192.168.120.200\24. I ran the script and this is what I'm getting I assume it's because I can't reach the device on this IP and subnet. I tried \8 but since the NVR is \24, it won't...

I made a slight mistake on my part. I downloaded the wrong TFTP application thinking it was Scott Lamb's. I see the python file/code. I'm not familiar with python scripts but I'll do some quick reading and give it another attempt.

So you're saying that regardless of what the NVR's IP is, once I set my computer to the pre-defined IP address (192.0.0.128), it should initiate the handshake and download the firmware? I thought that since the NVR has an IP of 192.168.1.1 /24 and the computer's IP must be set to 192.0.0.128/24...

I'm not sure if I fully understood the TFTP method. I proceeded based on a procedure that was given in a different thread. Simply to connect my computer to the NVR via a switch, run the application and it should load the digicap file automatically. Using the file you sent, I followed the...

I think restoring to default settings is the best option for you. I wish I had that option. Unfortunately I don't have hikcloud set up so that's not an option for me.

I'm gonna give it a try and I'll update. Thanks for the quick response.

I have the exactly problem with my Hikvision DS-9632. I made sure it was on v3.4.92, then upgrade to v4.22 only to encounter this problem. I tried the blank password but it does not work. I sent and received the XML file. SADP says that it's modified but there's no change on the login screen or...