Search results

  1. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    No update unfortunately. Tried to repack the firmware with all added patches/time corrections/MQTT files but couldn't get it to work/install on the doorbell. The new firmware was probably too big but I have not looked at it since because of lack of time. I did managed to get Home Assistant to...
  2. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    I have another script in Home Assistant making the snapshot (as it is a regular camera entity), which stores it in /media or wherever you want on your Pi/Synology/HomeAssistant-server. The reboots are still a problem yes. I have a new patch ready to install but I may have made a mistake since I...
  3. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    Just /npc/ (where I used to be able to edit files). You edit the message in doorbell.sh on the doorbell to reflect your username and password, and the IP of your MQTT Broker, then in Home Assistant you can create an Automation with trigger MQTT, topic Home/Groundfloor/Outside/Doorbell followed...
  4. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    The problem I'm having is not being able to edit any of the scripts on the doorbell. Using vi, editing and then :wq does not write the changes.
  5. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    Thanks whoami! I was able to upload the beta firmware but it got stuck at upgrading... In the end, it didn't take the new firmware but fortunately the device is still running the previous firmware. My Unifi setup was/is still blocking multiple threats targeting the doorbell, so I've removed WAN...
  6. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    I'm trying to flash a revised firmware for testing purposes (includes MQTT, busybox, set_time.sh/dhcp.script from @whoami ™) but I am unable to find the device with the IPC_upgrade_tool. The SD card reader on the device is still broken. Any ideas on how to flash it through UART or Telnet?
  7. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    It's been a while for me but I've kept reading progress here. Kudos to those who are keeping this thread alive! When I get the time, I want to update the patched image I previously uploaded. There are still some reboots happening, I want to have the image complete with mosquitto_pub and the time...
  8. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    How can I make use of the NTP client? I do have an NTP server running.
  9. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    I do still have to look at the reboots one more time. It seems there still is a reboot every couple of days. Or a solution to set the date time from script instead of using the app.
  10. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    You could also use the IPCam tool provided in this thread to push the firmware to the doorbell.
  11. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    Finally, had a typo (obviously) in the doorbell.sh. it was trying to run the mosquitto_pub from current directory (and not /npc/mosquitto_pub). Thanks guys! BTW @mrxyz, I think I somehow broke the reader, all other (and I have tried a lot) SD cards work fine elsewhere. How could I pack a...
  12. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    Funny thing is, when I start a Telnet session again and top, I can still see the doorbell.sh running. How would I go about using screen? I am still limited to what the installed busybox has for commands and the SD card reader seems faulty. I could use wget until the storage is full.
  13. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    Using the IPC tool I was able to reupload the patched firmware (probably ran out of space/inodes because the system wouldn't let me save scripts anymore). Again using wget I was able to get mosquitto_pub and the doorbell.sh onto the device. My question: using Telnet to start the doorbell.sh and...
  14. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    Could you please share your instructions for reflashing the firmware over UART from u-boot?
  15. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    Patched Firmware 13.01.01.31 based on 13.01.01.30: Has Telnet enabled Has FPS fix, steady on 15fps Stays up&running > 3 days, even when disconnected from WAN Instructions to install: Place npcupg.bin on root of (preferably empty) SD card Insert SD card into slot on Doorbell Open YooSee App ->...
  16. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    If anyone is interested, I could post the patched firmware which has the FPS fix, has Telnet enabled, and should stay up and running for more than 3 days when not connected to WAN. In the meantime, I overcame the issue of the malfunctioning SD card reader: I am using Home Assistant running...
  17. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    Just to be complete: I once again did a sudo mkfs.vfat -F 32 /dev/sdb -I on my Linux machine. Then placed some files on the card and unmounted it properly. While the doorbell was powered off, inserted the SD card and then powered it up. This is what cat /proc/kmsg shows: <6>Booting Linux on...
  18. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    dd is not part of the busybox installed, unfortunately. I tried mkfs.vfat /dev/mmcblk0 but that comes back "short write" on the doorbell via Telnet.
  19. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    I now tried: - 64GB NTFS -> Not recognised, not mentioned in /proc/kmsg and no mmcblk under /dev/ - 128GB FAT32 -> Not recognised, not mentioned in /proc/kmsg and no mmcblk under /dev/ The original 1GB FAT/FAT32 -> Error reading bootsector, multiple errors in /proc/kmsg and new device...
  20. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    Haven't tried a different card yet. Tried FAT16, FAT32 and exFat. All other devices recognise the card fine, as did the camera before it suddenly stopped.
  21. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    I now have a different problem. Probably messed something up because de camera won't mount the SD card anymore. Already tried reformatting on different machines (where the card is recognised and writeable). The log shows: <6>mmc1: new high speed SD card at address b368 <6>mmcblk0: mmc1:b368...
  22. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    Home Assistant + Doorbell + MQTT + Synology all working! Also no reboots for more than 3 days.
  23. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    @petervk, I want to use your solution with sending a MQTT message upon reading "sHiRegCmd.dwBaseAddr = 0x20650000 0x2004". Using cat /proc/kmsg and grep on the above, I can trigger the button press but I cannot get the camera to send to my MQTT broker running in Docker on my Synology. Any thoughts?
  24. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    To confirm: Yes, a properly named update file on the SD card will be installed when using the App of YooSee to upgrade the firmware. In the meantime, (thanks @sp00025 for your GitHub explanation) my patch is still running. Welcome to HiLinux. # /mnt/disc1/busybox uptime 09:58:51 up 2 days...
  25. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    Yesterday my UART TTL device arrived and I was able to chmod +x the patched npc binary. After this, the cam seems to be working. Had/have some trouble adding the device to the YooSee app but the Synology finds the camera (with what seems to be a steady 15FPS stream) and Telnet is open! Seems I...
  26. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    I think I found my culprit (n00b error = not setting the binary to executable). Is there any other way to revive the camera without using UART? I'm still waiting on my China delivery...
  27. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    Well, it's not booting :rolleyes: Might have to wait for my TTL UART adapter then...
  28. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    Thanks for the Tool. I couldn't get it to find the camera (maybe a VM issue) but renaming the file seems to have worked! The app mentioned a new firmware was available, it's installing as we speak. About the telnetd command, in the npc file they are not on the same line ;) Thanks for checking
  29. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    I could use some assistance. I have packed and signed the patched binary (with the npc file containing "telnetd & /npc/npc_fps_noReboot &") as version 13.01.01.31. I placed this npcupg_13.01.01.31.bin in the root of the SD card and inserted it. Unblocking the camera from WAN gives YooSee app...
  30. F

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    Nevermind, messed up the pip/python versions
Top