Search results

I meant the driver inside the camera. Is there any way to update the driver or relevant part of the software inside digicap.dav which can be changed and repacked to be tftd back into the camera for all its feature to work??

Did that. No joy. The audio driver part seems to be missing.

@b166erobot which language r u using. I understand English. Kindly translate post. Thanks

Could u kindly write an idiots guide on this. I have seen your mtd hack video. However, will really appreciate the following info. I would be able to disassemble the digicap.dav by hiktools 1. Which version of digicap.dav do I take out the davinci file. 2. A brief write up on how to insert...

This is my DS-2CD2732F-IS with audio and alarm. I remember that before recovery, the web interface had the tab "Video and Audio" which is now missing after recovery with @whoslooking downgrade firmware 525. I have also written to the seller for the original software. In the meanwhile any help...

The tab "video and audio" is missing in the web interface.

One small glitch though, the audio controls are not working. Any idea ??

whoslooking alastairstevenson b166erobot A BIG THANK YOU TO ALL OF YOU. AGAIN THANK YOU. I changed the 525 fie to language 1and viola everything is now working, in English. THANK U ALL ONCE AGAIN!!!!!!!!!!!!!!!!!!!!!!

I am using a win 10 PC. All firewalls turned off and antivius disabled in the services. will reflash with the downgrader and now wait for at least 01 hour. Somehow the message of successful flash comes only with 530 firmware and none other. Will come back later in the forum with results.

I tried all the firmware suggested by alastaiirstevenon but nothing works. Please help.

Hello, can any one help with my bricked camera DS-2CD2732F-IS as posted above. The camera firmware is stuck at 4.0.8 with the camera region changed to CCRR region which was earlier CCCH region camera. Is there any way to modify the camera back to the CCCH region?. I have tried TFTP with all...

OK, I will try another TFTP and wait till something happens. I had power cycled the camera after the success message previously. How long is the waiting ?? waited for almost 15 mins after re-flashing. The camera is going into boot-loops after the power cycle. It did not re-boot on its own. I...

Now Flashed with the US firmware. Here is the result [2015-11-13 21:29:48] TFTP server [192.0.0.128] initialized [2015-11-13 21:29:58] Device[192.0.0.64]test tftpserver [2015-11-13 21:30:06] Connect client success [192.0.0.64]Success [2015-11-13 21:30:06] Start file...

Dear Alastairstevenson Thank u for the reply. A strange thing I noticed. I had saved the serial no of the camera prior to bricking which was following. DS-2CD2732F-IS201xxxxxCCCHxxxxxxxxx And now the latest serial shown in SADAP is DS-2CD2732F-IS120xxxxxCCRRxxxxxxxxx Does this give any clue...

Bricked my Camera DS-2CD2732F-IS 2.7 12 mm royally. Dear whoslooking You are the god of such recovery. Please help. I had this fully working camera and like others in the forum, flashed my camera with 5.3.0_150513. That was the last time I had my camera smiling. I followed everything in the...