Search results

had an interesting experience today. The alarm company, an ADT dealer, installed a brand new unopened new box made in 12/2020 DB1 to replace the old. The doorbell chime did not work regardless what we did. Came back an hour later to decide what to do, and it was working to ring the inside...

new DB1 installed today. It did not ring the chime but started working about an hour later on its own. This leaves only two conclusions - either there is an electronic device / battery in it that has to charge to a minimum charge, or there is a setting on the cloud that takes time to configure...

Have to install it again and measure it. Waiting on Ezviz to send me a link to the current firmware version so I can reflash it in case it is a corrupted firmware install.

who makes a 45 degree or thereabouts mount for the DB1C?

probably not until I understand what the failure is. Too many of both the DB1 and DB1C do the chime fail thing from what I understand. Need to be sure I won't end up doing this again in 12 - 16 months.

about 17.9V. Plenty of VA. The Doorbell button works outside but no longer does inside. The doorbell woke me up the night before it failed about 2am. No one was there and all the motion sensor lights off. Hasn't worked since no matter what I do or try.

yes, and it works fine with the old Ring g1 device.

read every thread I can find here on my carema's issue including those. Normally when a chime fails that has been working then deleting the camera, resetting and adding back fixes it but not for me this time. If the chime has never worked it can be a defective product or configuration issue.

I have been reading trying to find a solution to an issue unrelated to this post. But in reading I saw many posts where people had camera's of many kinds dropping out so I wanted to post this in hopes some might see it. Distance and signal strength are not the only things that cause dropouts...

Lan to Wan. Lan is the output and Wan the input. Also just because it is in bridge mode does not mean that the webserver for config address on a unit is off. I have had several devices that were in bridge mode as far as traffic was concerned that still maintained a hard coded IP address so one...

Linksys MR8300 is a good wi-fi router

check your router to see if it works with something like Open VPN.

I found one at REMO for $10 but can't get the mechanical chime to work. EZVIZ said they thought my power kit was bad but won't sell them under any circumstances. The REMO one is all I could find. I opened it up and compared them. The circuit board is the same but the REMO has about 400 ohms in...

mine does too, 130F, but lately the mechanical chime has died again and nothing seems to bring it back. I keep thinking about how much energy it takes to maintain an object the size of that camera at that temperature - and how much a year I am paying for that energy.

I made a post for a similar problem here today. Review: EZVIZ DB1C . maybe someone might post if they have seen this before and know the fix.

Hello everyone. New here. Have a DB1 about 18 months old. Have two issues with it and because it came thru an alarm install Ezviz won't help much on it although they did their best to help. The problem is that about 3 weeks ago the mechanical chime failed. Tech Support said they thought that...