Search results

thanks

1) With only deepstack.exe and NO server.exe: When i open processmonitor i see python.exe and deepstack.exe At BI Settings->AI. I see START NOW (must mean is is stopped) When pressing START it for a short show STOP, and the START. This is wrong. *** With deepstack.exe and server.exe(BI choice...

1) I see some saying that BI are working without the server.exe (a copy of seepstack.exe) but for me not. I use: DeepStack-Installer-CPU-2022.01.1.exe & BI Latest 5.5.8.2.

I have same problem, what to enter in the "To Cancel Box"?

@TonyR Thanks for your reply, i will take a closer look at the cam:-) You are right, sorry i opened one more. I close it again:-)

Hi Have some Hikvision not cheap cam, looking for small indoor cheap web cam with web server, or call it www access or normally UI at a port. Low cost cam to day use a APP, and have NO UI(user interface). Old days all cam have UI and a RJ45 plug. So looking for cheap indoor cam with WIFI and...

H264, H264+, H265? Cam is Hikvision: DS-2CD2035FWD-I 1) What to use: Main or High Profile? Have read about it but can see any diff, bitrate is about the same. 2) What to choice for my CPU: H264, H264+, H265? From the data the cpu can handle this: i5-6500 h265 / HEVC (8 bit): Decode /...

So nice Thanks. With substream on my 4 cam and the adjustment as in the wiki, 4-7% cpu load, when running at service and using my app on android to access it. Mainstream: 1920x1080, constant, FR:12, BitRate:3072, Encodning: H264, IFrames:20 Substream: 704x576, constant, FR:12, BitRate:512...

NO problem. All ready have setup substream on the cam:-) But will BI only use the substream to detect? I have understand it record from the main stream...

Use HikVision cam, i will try with substream. If BI only have the substream to detect on hmmm. What setting suggested for substrean. Now i use 10fps and H264 about 3000bps. on all 4 cam.

I dont use Substreams but Direct to Disk is enabled and INTEL are enabled too.

Any Link to a DeepStack CPU server there can run Win10/64b. No docker a clean server...

Hmm you say my i5-6500 can run DS and BI without problem? Its a small HP server with SD disk and 8G ram. BI must still handle my 4 3Mpixel cam. Today it run with a 17-25% CPU load, RAM is no problem.

You are all so fast:-) Any solution without, AI and DeepStack cant be installed, i5-6500 with no internal Graphics GPU.

Zone detection A>B? How to solve this? The entrance to our house starts at the sidewalk, and through a driveway where the cars are parked, there are a small wall to, its the problem. I have 3 zones: A is sidewalk. B is a bit inside the driveway. C covers A and B. I detect well in both zones...

Just a suggestion. If problem is only in view, then: If using RDP on a win machine, go check your config to see you get all frame. Main setup->Camera->Video During RDP...

Is the "Rectangles" working on all your cam's? For me it only work if using RTSP in V5. Version 4 both work. Why is the color changed for "Rectangles" and making zone? If it must be changed, then do it as an option or from a color pallet to select by your self...

All this are working in my V4, latest 32bit version before version 5 came out. Installed a V5 64 bit. This wont work in V5. It is not me because i can set it all up in V4 and it work *"Highlights & Rectangles" in version 5 "Rectangles" wont work on http stream only on RTSP. *Zone are so buggy...