Search results

  1. B

    Hikvision PTZ camera preset

    Thanks for the reply, My model is a Hikvision DS-2DE3304W-DE
  2. B

    Hikvision PTZ camera preset

    Hello all. I have one camera after I change viewing directions that always returns to a preset after a short time. I deleted all presets in both the camera and Blue Iris software. It will still always return to the same "preset". I have another PTZ Hikvision camera that I am able to view...
  3. B

    Another capture

    I first thou ght spider but there are no defined legs
  4. B

    What do you think this is?

  5. B

    Multiple posts of the same video recordings on Blue Iris

    Thanks for the advice. All good stuff. The first part I had as you directed already set. The second part I will go to school on soon. Here is what I just discovered by accident and may be the same accident that led me to my problem. When I was viewing and scrolling through the recordings list I...
  6. B

    Multiple posts of the same video recordings on Blue Iris

    Yes, the clips list. As you see there is the time duration listed for each clip. When I click on a clip in the list, for example, "Front Yard" shows a 1m00s clip. Once the video comes up it is a 45 minute recording. The red and green markers will be 1m00s as listed on the full 45 minute video...
  7. B

    Multiple posts of the same video recordings on Blue Iris

    I figured out what these symbols are. Correct me if I'm wrong. I think these are the record time duration that is indicated in the thumbnails. The problem I'm have is that I get a lengthy recording and it will post several times. Each time the same video posts the thumbnail will indicate like a...
  8. B

    UniFi Topology indicating a false(ghost) hardware icon

    Well TonyR, I took your advise and looked up a MAC. While viewing my topology, only this time, a ghost device appeared on my access point very briefly and by briefly I mean maybe10-15 seconds. I was able to capture the MAC and look it up. It came up as an Texas Instrument devise. Pretty sure we...
  9. B

    UniFi Topology indicating a false(ghost) hardware icon

    Hello all, On my topology, one of my switches (US-8-150W Unifi) will show, sometimes, one or two extra devices hooked up to it. The switch is already filled up with cameras and a access point to it and all of my ports are used except the two extra ports that are titled SFP. So why do I get...
  10. B

    Unifi Network Topology OCD question

    This is a curious OCD question about the topology display page on my Unifi Network. My hardware will display different, at times, on the topology page. For example, It goes from my router, to a switch and then it will display two computers I have ethernet(ed) off the switch then to another...
  11. B

    Unifi Switch configuration

    Hello all, I have a ubiquity US-8-150W switch I run my security cameras to. The switch has 10 ports and 1-8 are PoE. 9 and 10 appear not to be. On port 1 I am using it to connect the switch to another switch connecting to the modem. I want to add another camera and I am out of PoE ports. So my...
  12. B

    IE Tab

    Hello all, I use to view my IP cams directly with Microsoft explorer. Then I had to use the extension IE Tab. Now IE Tab will no longer allow me to view my cameras directly. Does anyone have and Idea what I can use or do to IE tab to get to work. I can log into the camera and everything is...
  13. B

    Blue Iris Calendar in the "clips" section

    Okay, figured it out. I read the posts again from the similar problem I had last year. I had done and been recommended to run the "Repair DB" option In the "Blue Iris Status " Icon under the "Storage" tab. Last year that did not work for me so I forgot about it. On this year's problem it worked.
  14. B

    Blue Iris Calendar in the "clips" section

    I have noticed something else. When I view the clips on each individual camera and just the clips for each camera will populate the red dot will come back. When I view all the camera clips where all the clips will populate then the red dot goes away. I had a similar issue last year and pin...
  15. B

    Blue Iris Calendar in the "clips" section

    Hello all, In the calendar option, when viewing clips, there will be a red dot for all the days that have a recording still available. I have my storage set to 900 GB and that will get me around a month of recordings. This morning, while viewing recordings, I noticed the last two days have not...
  16. B

    Blue Iris Updates Question

    On my Blue Iris software we occasionally get a pop up with software updates. You can select what you want then the software will do its thing and restart. Now, when you make your selection then click OK, nothing happens. The pop up will close and the next day it will be back asking for the same...
  17. B

    Blue Iris Clips Thumbnails Question

    When I pull up my clips and it populates the left side of my screen there is a number in the lower right hand corner in each thumbnail. There is also a light blue line marker at the bottom of each thumbnail that appear in different thicknesses and different locations along the bottom. Does...
  18. B

    Blue Iris Camera Settings

    I would probably just do a screen shot or "snip it" (window+shift+s)
  19. B

    Blue Iris WAN not working

    Hello TonyR, Thank you for your Reply. If you mean logging on to a browser and entering IP address of a camera to view then yes, I can view the camera. I can also view cameras on the BI app in the network. But once I leave the office/network I can not log in and view. I am 99.9% sure I...
  20. B

    Blue Iris WAN not working

    Hello All, My WAN/Remote access is not working correctly with Blue Iris. Using the remote access wizard it will not verify the server. It times out. I know it should read Blue Iris there and, of course, it does not. The trouble shoot guide states that router is forwarding port to a camera...
  21. B

    Ubiquity USG unifi controller

    S "btw, Why post your problem in the classified ads?" Your question "why" is really the answer.:) This should tell you my IT level. I didn't plan on posting in the classified ad section. Didn't even know there was one. Thank you for your reply though and your input. The information you...
  22. B

    Ubiquity USG unifi controller

    Thanks for you reply, I followed your instructions and mine did not come out the same as your, which is OK. As you can tell I'm not the most diverse with IT stuff. Just enough to get in trouble. I have two desk top computers hooked up via ethernet. One for office activities and one for...
  23. B

    Ubiquity USG unifi controller

    Hello All, When I click on the Unifi app on my desk top to load the controller a window comes up to launch browser to manage my network. Well, it is not working now. I get a brief message that tells me my port 80 is already in use (or something along that line). Start up Failed. Trouble shoot...
  24. B

    Hikvision IP camera log in

    Thanks Tony R, I tried the IE Tab extension and it worked for me in both edge and chrome. appreciate the help
  25. B

    Hikvision IP camera log in

    I use Microsoft Explorer to log directly into my Hikvision cameras. Well, with explorer on its way out I try to use Chrome or Edge to view the cameras directly. Chrome and Edge state to "click here" to add the plug in. I follow all the instructions and I still can not view a live camera feed. I...
  26. B

    hikvision IR

    Thank you all for your replies, All of the replies make sense. The camera description states Outdoor Day/Night. So I'm guessing Day/Night means no IR? But, as I stated before, and I know I need to do this at night, but during the day I can manually turn on the IR and the view will be in Black...
  27. B

    hikvision IR

    Thank you for your reply. I am looking into this because when I view the recordings on that particular camera, it is dark compared to the others. Just see the lights that shine from yard lights and what they illuminate. I am not around the cameras at night since this is our office. Regarding...
  28. B

    hikvision IR

    Hello all, Wondering if anyone has had trouble with the night vision IR on your hikvision cameras. I have a hikvision DS-2DE3304W-DE and all works fine except the IR appears to be not working. I go to the PTZ control option then the IR and it is set to auto. During the day I set it to on and the...
  29. B

    Calendar in Blue Iris is slow to populate

    OK all, I am going to share this. The problem I have had with the clips calendar has been resolved or at least appears to be. We have been running version 4 software since we installed the cameras in 2018. All was good except a few issues every now and then that this board helped me fix. So...
  30. B

    Blue Iris Clips calendar not working correctly

    I am going to share this with you on what I learned. Previously I stated I disabled the camera I thought was causing our issue. I dropped the file limit size to something like 100 GB to delete all of the older recordings. A few days later I also deleted, manually, the file clips in the calendar...
Top Bottom