Search results

Last year I ordered what I thought was going to be the rack ears for the wide model 7608, but turned out to be for the narrow model, from Nelly's Security. The cost was like $15 U.S. I returned them and found some other generic Cisco switch mounts on Ebay that fit my wide NVR.

Be careful. I was working with Nelly's, was told they had found a source for the rack ears, and I ordered them. Got them last week and turns out they were the ones designed for the narrower 7608. They will not fit the wider 17" wide 7608. The rack ears on each side are 2-1/2" long, put those on...

I ordered a set of these rack ears off of ebay, meant for a cisco router. Out of the box, they wont work because the rack-mounting side of the ear is 1/8" short. Overall with rack ears attached to NVR, the width is 1/4" short of what it needs to be to line up with rack rails. So either will...

Well, they might. Looks roughly correct. Can't find any detail on chassis hole spacing, which needs to be 1" on the 7608. Found specs on Cisco 2610. Its width is 17.5". The 7608 is 17-5/16. So 3/16 shorter. If the rack screw slots have enough play in them may work, or take a little dremel tool...

These look interesting. Can't verify every measurement, but look to be about right. side hole spacing is right on the money. Inset distance looks about right. A bit pricey though. Works out to $34 US plus shipping.

Hmm...puzzling. My 7608 is like the bigger style of the pictures you have; 17-5/6" W x 11-1/8" W x 1-3/4" H. But it didn't come with rack ears, and Nelly's said they don't have any.

Recently bought 7608NI-E2/8P NVR from Nelly's. I'm looking for rack mount ears, for standard 19" rack. The NBR looks to be standard 1U height. Nelly's doesn't have any rack mount ears for the 7608, and isn't providing any help where I could get a pair. I found a couple sites; one in New Zealand...

Talked to Nelly's about issue, and they sent me firmware v5.3.6 build 151105. Installed on all three cameras and it does seem to have cured the issue.

I just recently got a 7608 NVR and three 4MP WDR cameras from Nelly's. I’m getting either white-out/black-out flash for a second or two with then a slow fade-in to normal exposure. It’s a white-out flash during day or a black-out flash at night. It seems to be triggered when there is change in...