Search results

with this it is not the case.. De configuration program for the camera has a button, for opening a web browser, with the IP of the camera... for the web interface.. but it does not work.. If there is a button in the config utility, and it uses a browser, it must work.. i think... hope.. :) but...

Hi, I have no idea why.. i got tis camera. I had to reset is, according to this method: reason: password unknown.. Now, the camera starts, i can intitialise it with the config tool. I can assign a new ip, new password, etc. It's OK, no error messages. But i can't open the web interface...

Hi, I had to upgrade the firmware for this old NVR, for password reset.. (admin password lost...) i used this firmware...

:headbang::headbang::headbang::headbang::headbang::headbang::headbang::headbang::headbang::headbang::headbang::headbang:

YOU ARE A GENEIUS!!!! Solved. camera works!!!! i googled for the modprobe ov5658_mipi.. nothing.. but for the ov5658, there where some resoults.. It is the camera module used in this device.. hmm.. https://www.gophotonics.com/products/cmos-image-sensors/omnivision-technologies/21-118-ov5658...

I made an experiment. I used the phyton update tool, not the hikvision tftp tool to upgrade the fw,but i made a log file from serial too.. interesting for me is: Default method to init without VIN drivers... Cat this file to find out what VIN can be supported. Default init without lens driver...

for the erase command, according to the help, there where 2 options for configuration partition.. I erased both.. HKVS # erase cfg_pri erase cfg_pri ... done HKVS # erase cfg_sec erase cfg_sec ... done after booting, the same.. but, there is a diag command from the main sw.. it gives a lot...

I used the same fw version, what was on the label, but i tried the latest one. Same result.. :(

Ok :) but what is the next step :D :)

do You know how to use the format command? there is no help for it. After executing: format +enter, resoult is: formatting...................... After o made a tftp upgrade, the camera boots, but does not run properly, but seems better.. longer boot log, less error messages :) but ip address is...

Hi, i had to flash back the r6 version. (last was the r0..) The prtHardInfo does not work... ps, and ifconfig attached, but does not use the 192.168.1.64 address.. sadp cant find it.. is there a method, to rebuild the file system, delete the config, and the darabases, and start the whole...

Hi, done. 3 times :) but no luck. The camera gets the new firmware, updates, fine.. But after rebbot, it does not start, does not answer to 192.168.1.64. i made a try with the original fw version, according to the label on the camera.. then the latest r6 fw, and last i tried one of the r0...

Hi! Hit Ctrl+u to stop autoboot: 2 HKVS # u 'u' is a ambiguous command! Exec the shortest command * UPDATE START * MAC: a4:14:37:c1:*** TFTP from server 192.0.0.128; our IP address is 192.0.0.64 Filename: 'mImage_r6' Load address: 0x02000000 tftp transfer block size is set to 512 bytes...

Ok. I made a serial cable, and.. it seems you are right.. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2022.10.11 14:56:11 =~=~=~=~=~=~=~=~=~=~=~= [4l U-Boot 3.1.6-195297 (May 25 2016-11:39:03) boards:195277 Boot From: NAND 2048 RC SYS_CONFIG: 0x30064059 POC: 100 Cortex freq: 600000000 ENET freq...

good news? Bad news? I don't know. I tried to use an old R0 firmware.. Same situation. Upgrade OK, but no ping or http answer after reboot. I had to eat something, I left the camera turned on, ping was running. I came back, there is a PING asnwer.. ok. SADP tool? There is my camera.. Hmmm...

Hi, thank you! I spent the last 6 hours on this :) but no success.. :( I tried the python version uf the tftp updater. On Ubuntu-miint, it did not worked for me. the .py script did not start, I tried to install a python enviroment, but it didn't help. After 2 hours, with google i found this...

Hi, i have a DS-2cd2t52-i5 camera, I got it from a friend, becouse it was set aside after a firmware upgrade, for a year... It was bricked. I tried all firmwares what i got from several places, for the R6 platform.. V5.5.82_Build190909, V5.5.53_Build180730(1.3MP, 2MP, 4MP, 5MP,1X31,1X41,67X5)...