Search results

  1. R

    Camera Water Issue

    Also, I think the Gmail address that receipts from Andy come from is not his primary email... try kingsecurity2014@163.com
  2. R

    GetEvents error / "Events: subscription 8000ffff"

    I had many "Events: Request 8000ffff" at 3am also, on many cameras, but all have onvif authenticator: OFF (but I do have "get Onvif trigger events" checked ON as I do use the camera's IVS). Recordings were not impacted.
  3. R

    CodeProject.AI Version 2.5

    Thanks Mike... I'm using Yolov5.net on the cpu only BI machine, and was using Yolov5 6.2 for the Win11 3070gpu pc in the mesh, but I'll try moving that one back to Yolov5.net. I look for deer (to dissuade them!), so I don't think IPcam-general works for that, so I will avoid Yolov8 until you...
  4. R

    CodeProject.AI Version 2.5

    Mike: re asking, with the added question of using Yolov8 in a win 11 box with a RTX 3070 GPU (as a mesh).
  5. R

    CodeProject.AI Version 2.5

    cpai 2.5.6 posted, and installed ok and running ok on a win 10 and win11 machines.
  6. R

    Simultaneous alerts in BI

    If multiple cams see the same movement, using Motion Sensor, one may trigger and alert first, but the second, seeing the same person a couple of seconds later, tends not to trigger... even if I see "Person 90%" on both cams. I'm using continuous + Alerts, so I have video of both, but the second...
  7. R

    CodeProject.AI Version 2.5

    Mike: is Yolov8 ready for prime time.?.. can it be installed in a win10 system using just the cpu without a graphics card (now using Yolov5.net )? If so, does it offer advantages in speed or accuracy? And if yes to all that, are you re-doing the ipcam-combined model for it? Thanks...
  8. R

    MS Edge in IE mode

    Along those lines, if you use that IE.vbs to open IE, which works great, is there a way to save a shortcut of that cam that still points to IE? I usually have shortcuts for all my cams in a folder (pointing to Chrome now) , but when I drag the address bar from IE to the desktop or a folder...
  9. R

    CodeProject.AI Version 2.5

    I have seen that any updating of BI version requires at least one, on occasion more, restarts of the Blue Iris service in windows services panel, in order to see the custom models in BI settings/ AI tab
  10. R

    Substream FPS setting.... Where did it go?

    If you are asking whether 15fps is hobbling any camera functions like motion or alerts, then no. I think 15fps is what most of us use, what is recommended here, and enough for the intended use. All my cams are15 fps... both main and sub.
  11. R

    Substream FPS setting.... Where did it go?

    for me, both. I can edit.
  12. R

    Substream FPS setting.... Where did it go?

    Camera , encode shows frame rates of main and sub.. and I frame, bit rate, etc also.
  13. R

    5.8.5 - January 22, 2024

    5.8.5.1 released and the scaling issue is fixed.
  14. R

    5.8.5 - January 22, 2024

    I traded info w Ken: found and fixed for 5.8.5.1. Only showed in Contnuous + Alerts, not in full time continuous.
  15. R

    5.8.5 - January 22, 2024

    What's the difference between AOI and the 'Use zones and hotspot" setting in the Motion Sensor/Trigger tab?
  16. R

    Send Pushover notifications with pictures and hyperlinks

    You say "upon trigger"... are you walking outside and triggering the alert, or using the "test" in the BI \Alerts page? The "Test" may not work for this...
  17. R

    IPC-T54IR-ZE-S3 FPS issue in Blue iris

    try h264?
  18. R

    Day/Night settings on new 5442 cams

    Reporting back: I had to mess with the settings some: the "0" for sensitivity prevented it from changing to b/w at dusk, so I raised the setting one notch every day, until I had it at 4 today, when it behaved and changed without cycling back and forth. But I realized I was changing the "day"...
  19. R

    CodeProject.AI Version 2.0

    I have Yolov5.net enabled on my BI box, since it has no graphics card. But I have Yolov5.6.2 enabled on my other PC since it does have a decent graphics card. Mesh looks like it is working...Is this not the way to do it? Should I change the 2nd PC back to Yolov5.net also?
  20. R

    Day/Night settings on new 5442 cams

    Thanks, I will try those settings this eve and see if it helps. The "0" for sensitivity and using "auto" for daytime are different, so I shall see. I'm considering updating the firmware, but hesitant:)
  21. R

    Day/Night settings on new 5442 cams

    I have two Andy cams... T54IR-ZE-S3 running the newer web 5 interfaces, and firmware V3.100.0000000.5.R 2023 -05-09 One goes back and forth between Day (color) and Night (B/w) at dusk, flashing back and forth until it gets dark enough to stay B/w). The other is more stable. What I can't figure...
  22. R

    CodeProject.AI Version 2.0

    Replying to myself: Thanks to Tinman, the problem is solved:) Great work! The issue was that CPAI insisted on seeing the Cameras IP (Dual NIC) as the active IP, and the second PC can't see that. Tinman pointed me to this: This explained how to force the priority to be on the main...
  23. R

    CodeProject.AI Version 2.0

    The whole idea of dual NIC is that the main net shouldn't see the cameras network, other than BI itself, I think? BI is on the 192.168.1.xxx network, the cameras are on .50.xxx Both pc's see each other in explorer on the .1.xxx net. CPAI says "active address" is the .50, but no idea why or...
  24. R

    CodeProject.AI Version 2.0

    hmmm, I run a dual NIC, and I think the BI PC is on the same network as the other pc with the cameras on a separate net... but I do see CP saying the "active IP address" is the camera one? I'm unclear what I would have to change here...
  25. R

    CodeProject.AI Version 2.0

  26. R

    CodeProject.AI Version 2.0

    One more thing: The Blue Iris PC runs 2.4.5 now, shows Mesh active, sees the other PC, and seems to be working like expected. The Second (Non blue Iris ) PC (that shows up in the first BI Mesh status) , is running 2.4.5 ok it seems, but in "Mesh" it shows "Remote Servers in Mesh: 0" , and the...
  27. R

    CodeProject.AI Version 2.0

    or reboot, duh, shows now. I ought to know better... but the other one showed without the reboot! thanks!
  28. R

    CodeProject.AI Version 2.0

    edit: reboot fixed this, sheesh, should have done that first! I installed 2.4.5 on the second (non BI) PC, and it installed fine, and shows "Mesh" in the control panel. But after an uninstall on the blue Iris PC, I installed 2.4.5 but it does NOT show "Mesh" in the CPAI control panel like it...
  29. R

    IVS error in 5442

    EDIT: SOLVED! (I had exported and imported settings to clone the camera, but for some reason the Video Config didn't take properly, thus the GetEvents error. Re doing the "Find/inspect" fixed it, working as expected now. I'm trying to set up an IVS rule in a 5442 ( a cloned cam). I had no...
  30. R

    Blue Iris UI3

    Thanks, I may try some of this later but also possible I will give up on this project... just another excuse to get a more modern TV :) I appreciate the attempt (UI3 works great on all the other desktops, phones, and tabs, that I have used)
Top