Search results

You had the IP correct, when you see the green dot it means the NVR connected to the camera. Just the ports were wrong.

Try onvif. If that's not available the default ports I believe are 80 and 554

There's your problem. When adding the camera there is a drop down list for the brand, choose Hikvision. Enter your camera ip, username and password. Leave the ports alone, the Hikvision default ports are correct for this camera.

I'll try, I'm still a beginner myself. You have the IP address of the camera. Go to your NVR and add a camera. Type the IP address, ports and username/password that belong to your camera. Should be working at this point.

PTZ seems to be working. The model I am using is Amcrest (which is rebranded Dahua)NV4108E.

Got it working. The nvr was assigning the same address to all the cameras. Had to use a friends laptop to connect the Ethernet from the computer to nvr and run ivms. Was able to change the ip of the cameras from there.

Picked up a Dahua NVR from a friend. Currently have the Mini PTZ Huisun gen 2 cameras. When I plug the cameras into the poe NVR, they do their startup dance (tilting, moving, etc) then there is no video feed. Cannot login to cameras with my computer, as I only have a macbook air (no ethernet...

Thanks for the help. Unfortunately, that is not an option, as I ran the cables before the spray foam insulation was done so the wires are foamed in lol

Hello, I currently have one cat5e cable run to where I would like to set up 2 poe ip cameras. Am I able to split the four twisted pairs into sets of two and run each camera off 2 pairs instead of 4?

Here is what i have in mind so far: 7108N-SN/P Multi-language 8CH IP/Network Camera CCTV NVR Support ONVIF,PoE ,Switch Surveillance Video Recorder http://s.aliexpress.com/JVRFn6Vb With these 2016 HUISUN 2nd Generation 2.0MP 10X IP66 Waterproof 1080P with POE IP Bullet PTZ Camera...

They are powered by the NVR correct? The setup I am planning is: Camera ---cat5e---NVR---monitor

Thanks for helping out a beginner guys. I'm assuming these cameras are easy to set up? Already have cat5e cables running where I would like these. I just plug them in correct? Also, which NVR would you recommend with these cameras? Thanks again.

I guess I'll go with the 10x just in case, only a few dollars more. Is this the model everyone here is recommending?

Is it worth it to go for the 10 x?

2016 HUISUN 2nd Generation 2.0MP 10X IP66 Waterproof 1080P with POE IP Bullet PTZ Camera Hot Sell CCTV http://s.aliexpress.com/bYJrUVf6 HUISUN Manufacture 2016 New Model 2nd generation 2MP 4X,with POE, IP Bullet PTZ Camera CCTV Security http://s.aliexpress.com/aqamqaam What is the...