Search results

What video compression are you using? 75% CPU usage , I would check the task manager to make sure you are not running 100% and is thermal throttling. I would say just start from scratch and treat the setup as brand new and work your way up and see if there is something that is conflicting...

I have all 16 cams running on sub2 1080p and they look pretty great. Try it out if storage is not a issue.

D1 resolution is so low that the video will not look good if you are comparing with your main of 4mp. I always use sub2 with 1080p. I see you have a drop down so you should also have sub2 with 1080p resolution for your sub. Also for the bitrate, I believe the in camera is bits and in BI is...

if you post pictures of your current settings for cams and while live viewing as well could help figure out what is wrong with yours. Try to turn down the resolution and fps first. I would look into if you are running on 100M or 1000M on your BI if turning down seems to help. I had mine...

How about you change your windows password to a simple pin number and try logging in to turn on the service, if it works, then go back and change your pass to whatever you had. It may turn on the run as service and won't ask you to redo the credentials.

didn't you say you have a windows user and not the default admin and a password to log into your windows account? Try leaving the user part blank and use the windows login pass to turn on run as services to see if it works

You could try doing blank user and just put in the pass. I think it was blank if you want localsystem

try using "Administrator" instead of "Admin" as user. That is how mine is setup.

Lets make sure you have the network in order, You should have 2 cams plugged into POE switch, the switch plugs into one port of your dual pc, the other port on your pc goes to the router. If your router is 192.168.1.1 then set your port for the switch to 192.168.2.1 and have the cams to...

You could simply just install google chrome on your BI computer and setup a new account for this use only, setup google remote desktop on the BI comp and access that pc from anywhere without having to setup ip forwarding and setting up netzero or vpn services.

I believe most of users here will tell you that if you want simple access to your cams then there are security risk with your network. If you don't care about security risk then it's very simple to do remote access. Just ask yourself what do you want out of your system. What is the most...

This fixed my problem, I was getting 100+ no signal in a day, now 24hrs zero. :D Color4K180T Running H.264 on both main and sub2 4096x1800 20fps 12288bit / 1920x832 20fps 8192bit working great so far with these settings

I guess I know why now that when I turned off all the camera overlay turned off made my cpu usage go up.

so when you export the video, I have direct to disk and it exports just fine with the timestamp showing in the exported video. So I am still confused why use the on camera and have pain of making sure they are all synced.

Yes, I ran all the cables brand new CAT 6 with T568B altho it's flipped backwards, I could not tell if the plug was supposed to face top or bottom but some of store bought had it orange starting from left side when looking from opposite side from where the clip part is so I went with that way...

I just don't use the camera time and just set the BI to embed the time. I'm not sure what is the downside to doing it this way.

Anyone have issues of 4K-180T having no signal counts in BI? I am getting 100s a day depending on how much motion is being detected. I have tried to reset the camera, updated the firmware, changed the resolution, changed the fps down, deleted the cam from BI and reinstalled. Ehternet wire run...

Thanks Andy, I recieved mine on Tuesday but were too busy to come here to thank you that day since I was really busy installing and setting up all the cams. :D

I would say to include pictures of the configs and ip so we can take a look at what might be the problem

Like I said I was too exited when ordering and I really don't have use for the 4 extra cams I bought by mistake lol :lmao: It was an extra $600 I didn't plan on spending :facepalm:

Check your spam folder, he already said he sent out winning emails

Got your winner email, it went into junk folder for some reason. Thanks and congrats to all the other winners. Be sure to check your spam folder

Hey you won cus I cut in line so you owe me ;)

Ding Ding, I have one of the 3rd place winning number :wave: #161

Try the search in your email, could have gotten into spam folder.

if you bought tickets from his site, he has already emailed your ticket number. Check your email, try searching "EmpireTech Autumn Sales Ticket NO"

I just use Ghost Spectre Superlite for a clean bloatware free windows 11 it even doesn't have edge or defender installed and I can block windows update pretty much permanetly.

You can order direct from him and he will ship it from china, won't take that long to get them, I got 10 of his S3 2.8mm

Alright just wanted to make sure cus the other cams came in uninitialized so maybe this does happen where they forget to reset before shipping out