Search results

I was able to set the ip address and subnet on my cam..I am now getting a request to read file on the tftp server but it keeps looking for file name 'boot'.. uboot environment: eth0 : phy status change : LINK=UP : DUPLEX=FULL : SPEED=100M Using eth0 device TFTP from server 10.0.0.111; our IP...

This is what happens when I boot thru the console [END] * Board tools : ver0.0.1_20121120 * [debug]: {source/utils/cmdshell.c:168}cmdstr:himm 0x112c0070: 0x00001000 --> 0x00001000 [sys_config: loading out-of-tree module taints kernel. END] *** Board tools : ver0.0.1clock=3 _20121120 ***...

In the U-boot console I tried running the command "dhcp" command hisilicon # dhcp Hisilicon ETH net controler MAC address invalid! Set Random MAC address: d6:ef:4a:39:5f:b8 eth0 : phy status change : LINK=UP : DUPLEX=FULL : SPEED=100M BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP...

The USB to Serial cable arrived yesterday. Was able to get a reponse using Putty and setting the rate to 112000. This is what im seeing now. System startup Uncompress Ok! U-Boot 2016.11-g7155f55-dirty (Jul 28 2021 - 20:05:33 +0800)hi3516ev300 Relocation Offset is: 07730000 Relocating to...

Yes I tried connecting the cameras to other ports on the POE switch. On the POE switch the ports that the cameras connect to show activity for about 10 or more secs then the port goes off then comes back on over and over

After doing some research I attempted to recovery the firmware using the tftp method but my poe cam is not connecting to it. I tried changing my ip to the Zosi factory ip which is 192.168.138.x then used there search tool and that didnt work. Tried changing my ip to the ip range the camera was...

I narrowed it down to being a issue with the 1828D it's self. I added a POE injector to the 1828D and it seems to have a good solid network connection now. But the 2615D are offline. I am trying to figure out the ip address of them using wireshark but ive been unsuccessful. Next I'm about to try...

The Zosi 1828D kept disconnecting randomly and would go offline. At Random times the camera would come back online. So I updated the firmware for the 1828d. Then i updated the firmware for the 2615d. Both are ip cameras I'm not using a nvr. I would really like to get the 2615d working again...

Good Morning guys, I had been having trouble with my Zosi IPC-2615D and Zosi 1828D working together. So I attempted to update the firmware on the IPC-2615D. After updating I must of chose the wrong firmware because the camera will not come online. Is there a way to manually recovery the...